• 제목/요약/키워드: RFID-Reader

검색결과 743건 처리시간 0.03초

UHF 대역 RFID 리더 응용을 위한 주파수합성기 설계 (Design of a Frequency Synthesizer for UHF RFID Reader Application)

  • 김경환;오근창;박종태;유종근
    • 전기학회논문지
    • /
    • 제57권5호
    • /
    • pp.889-895
    • /
    • 2008
  • In this paper a Fractional-N frequency synthesizer is designed for UHF RFID readers. It satisfies the ISO/IEC frequency band($860{\sim}960MHz$) and is also applicable to mobile RFID readers. A VCO is designed to operate at 1.8GHz band such that the LO pulling effect is minimized. The 900MHz differential I/Q LO signals are obtained by dividing the differential signal from an integrated 1.8GHz VCO. It is designed using a $0.18{\mu}m$ RF CMOS process. The measured results show that the designed circuit has a phase noise of -103dBc/Hz at 100KHz offset and consumes 9mA from a 1.8V supply. The channel switching time of $10{\mu}s$ over 5MHz transition have been achieved, and the chip size including PADs is $1.8{\times}0.99mm^2$.

A Scheme for Guaranteeing Fair Identification Delay in Gen-2 RFID Systems

  • Lim, In-Taek
    • Journal of information and communication convergence engineering
    • /
    • 제9권1호
    • /
    • pp.44-49
    • /
    • 2011
  • In RFID System, when multiple tags respond simultaneously, a collision can occur. A method that solves this collision is referred to anti-collision algorithm. In Gen-2 RFID system, if the slot-count size varies during a query round due to the collisions, a new query round begins with a QueryAdjust command. Anti-collision algorithm of Gen-2 RFID system is simple. But, it has the tag starvation problem that a tag may never be successfully identified because its responses always collide with others. Therefore, this paper proposes a scheme to guarantee the fair identification delay. In the proposed scheme, if the slot-count value changes due to the collisions, the reader broadcasts a CollisionRound command to begin a collision round. During the collision round, the reader identifies only tags that occurred collision during the previous query round.

RFID 리더 충돌 중재를 위한 적응형 리더 네트워크 (Adaptive reader network for solving the reader collision problem)

  • 임상순;한규호;김윤국;안순신
    • 한국정보과학회:학술대회논문집
    • /
    • 한국정보과학회 2005년도 한국컴퓨터종합학술대회 논문집 Vol.32 No.1 (A)
    • /
    • pp.523-525
    • /
    • 2005
  • RFID(Radio Frequency IDentification) 기술은 RF 신호를 이용하여 특정 물체에 부착되어진 태그를 일정 범위 이내에서 식별할 수 있는 자동인식기술이다. RFID 시스템 상용화 이전에 해결해야 할 중요한 문제 중 하나는 다수의 리더들 간의 충돌 문제이다. 이러한 문제점을 해결하기 위한 리더 충돌 방지 알고리즘들은 RFID 시스템의 효율성과 직접적인 연관이 있으며 아직 연구가 미비한 상태이다. 기존의 리더 충돌 방지 알고리즘 중 Colorwave 방식은 구현이 간단한 장점은 있으나, 시간 이용 효율 저하 및 태그 오동작이 발생하게 된다. 또한 경쟁 기반의 슬롯 할당 방식으로 인한 문제점을 가지고 있다. 본 논문에서는 RFID 리더 네트워크에 충돌 중재를 위한 매니저를 두어 리더 간의 충돌 발생을 방지함과 동시에 위의 문제점을 해결 할 수 있는 적응형 리더 네트워크 구조를 제시한다.

  • PDF

시각장애인을 위한 RFID 의약품 음성안내 단말기 개발 (Development of RFID terminal for the Blind to Voice Guide Pharmaceutical E-pedigree)

  • 강준희;안성수;김진영
    • 전자공학회논문지 IE
    • /
    • 제47권3호
    • /
    • pp.19-25
    • /
    • 2010
  • 의약품 정보에 대한 접근이 쉽지 않은 시각장애인을 위해 의약품 정보 안내 단말기를 개발하였다. 본 연구에서는 시각장애인에게 의약품 관련 정보를 전달하기 위하여 RFID 기술을 사용하였다. 안내단말기로 의약품에 부착된 RFID 태그를 인식하면 태그의 고유 ID에 따라 단말기를 통해 음성으로 의약품 정보를 안내하도록 하였다. 의약품 정보는 식품의약품안전청에서 운영하는 이지드럭 사이트를 통해 의약품 정보를 취득하도록 하였다. 정보 안내 단말기는 휴대가 간편하도록 목걸이 형태로 제작 하였으며, 평상시에도 유용하게 사용할 수 있도록 mp3 재생기능을 탑재하였다. 본 연구에서는 단말기의 코어칩으로 ARM 계열의 Cortex M3 칩을 사용하였고, RFID 회로를 구현하기 위하여 저전력의 NXP의 MFRC523 칩셋을 사용하였다. MFRC523 칩은 모바일에 적용되는 저전력 기능이 탑재되어 있다. 음성회로를 구현하기 위해서는 VS1003B MP3 Decoder IC를 사용하였고 의약품 정보서버와의 무선 통신을 위해는 CC2500 칩셋을 사용하였다. RFID 프로토콜은 ISO 14443A 타입과 B타입을 모두 지원하도록 개발하여 다양한 프로토콜로 확장이 가능하도록 개발하였다. 본 시스템을 사용하면 시각장애인에게 의약품 정보를 편리하게 전달할 수 있어 시각장애인의 의약품 오남용을 줄일 수 있다.

온라인 백-엔드-데이터베이스가 없는 안전한 RFID 상호 인증 프로토콜 (Secure Mutual Authentication Protocol for RFID System without Online Back-End-Database)

  • 원태연;유영준;천지영;변진욱;이동훈
    • 정보보호학회논문지
    • /
    • 제20권1호
    • /
    • pp.63-72
    • /
    • 2010
  • RFID (Radio Frequency IDentification)는 유비쿼터스 환경에서 바코드를 대체하여 유용하게 사용될 하나의 차세대 자동식별 기술을 말한다. RFID 시스템은 기본적으로 태그(Tag)와 태그 인식을 위한 리더 (Reader) 그리고 태그에 대한 정보를 저장하고 있는 백-엔드-데이터베이스(Back-End-Database)로 구성된다. 최근 휴대폰이나 PDA(Personal Digital Assistants)에 모바일 리더 기능을 장착한 모바일 리더를 이용한 RFID 서비스가 급증하고 있으나 이러한 환경에서 안전한 기법에 대한 연구는 아직까지 미흡하다. 기존에 존재하는 고정형 리더를 이용한 기법들을 모바일 리더를 이용한 환경에 적용하기에는 추가적으로 고려해야할 요소들이 존재한다. 모바일 리더 환경에서는 기기의 분실이 쉽고 또한 통신 장애 및 통신 범위 초과와 같은 이유로 백-엔드-데이터베이스와 항상 신뢰하여 연결될 수 없기 때문에 이러한 추가적인 문제들을 고려한 안전한 기법에 대한 연구가 필요하다. 이러한 문제를 해결하기 위해 최근 Han 등이 백-엔드-데이터베이스가 없는 환경에서 RFID 상호 인증 프로토콜을 제안하였다. 하지만 Han 등의 기법은 도청, 스푸핑, 재생 공격을 통한 태그 위치 추적이 가능하다. 또한 저가 기반의 수동형 태그에 부적절하게 많은 통신량을 요구한다. 따라서 본 논문에서는 Han 등의 기법의 취약성을 분석하고 안전성과 효율성 측면에서 향상된 온라인 백-엔드-데이터베이스가 없는 환경에서 RFID 상호 인증 프로토콜을 제안한다.

A Slot Allocated Blocking Anti-Collision Algorithm for RFID Tag Identification

  • Qing, Yang;Jiancheng, Li;Hongyi, Wang;Xianghua, Zeng;Liming, Zheng
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제9권6호
    • /
    • pp.2160-2179
    • /
    • 2015
  • In many Radio Frequency Identification (RFID) applications, the reader recognizes the tags within its scope repeatedly. For these applications, some algorithms such as the adaptive query splitting algorithm (AQS) and the novel semi-blocking AQS (SBA) were proposed. In these algorithms, a staying tag retransmits its ID to the reader to be identified, even though the ID of the tag is stored in the reader's memory. When the length of tag ID is long, the reader consumes a long time to identify the staying tags. To overcome this deficiency, we propose a slot allocated blocking anti-collision algorithm (SABA). In SABA, the reader assigns a unique slot to each tag in its range by using a slot allocation mechanism. Based on the allocated slot, each staying tag only replies a short data to the reader in the identification process. As a result, the amount of data transmitted by the staying tags is reduced greatly and the identification rate of the reader is improved effectively. The identification rate and the data amount transmitted by tags of SABA are analyzed theoretically and verified by various simulations. The simulation and analysis results show that the performance of SABA is superior to the existing algorithms significantly.

RFID Tag Detection on a Water Content Using a Back-propagation Learning Machine

  • Jo, Min-Ho;Lim, Chang-Gyoon;Zimmers, Emory W.
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제1권1호
    • /
    • pp.19-31
    • /
    • 2007
  • RFID tag is detected by an RFID antenna and information is read from the tag detected, by an RFID reader. RFID tag detection by an RFID reader is very important at the deployment stage. Tag detection is influenced by factors such as tag direction on a target object, speed of a conveyer moving the object, and the contents of an object. The water content of the object absorbs radio waves at high frequencies, typically approximately 900 MHz, resulting in unstable tag signal power. Currently, finding the best conditions for factors influencing the tag detection requires very time consuming work at deployment. Thus, a quick and simple RFID tag detection scheme is needed to improve the current time consuming trial-and-error experimental method. This paper proposes a back-propagation learning-based RFID tag detection prediction scheme, which is intelligent and has the advantages of ease of use and time/cost savings. The results of simulation with the proposed scheme demonstrate a high prediction accuracy for tag detection on a water content, which is comparable with the current method in terms of time/cost savings.

항공화물 탑재용기(ULD)의 효율적 관리를 위한 LED-ID와 RFID 기반의 드론 적용 방안에 관한 연구- 항공화물터미널사례 (An Empirical Study on the Application of Drone based on LED-ID & RFID for Effective Stock Management of Unit Load Device - perspective of Air Cargo Terminal Case)

  • 백남진;백남규;이민우;차재상
    • 한국위성정보통신학회논문지
    • /
    • 제12권4호
    • /
    • pp.157-161
    • /
    • 2017
  • 항공화물운송용 탑재용기의 효율적 관리는 항공사의 주된 관심사이다. 현재 운영되고 있는 방식은 RFID 방식의 TAG을 부착한 상태로 직원들이 PDA를 이용하여 관리하고 있다. 하지만, 터미널내의 여러 가지 환경상의 제약으로 인해 각 ULD에 장착된 RFID TAG 인식에 어려움이 있다. 이에 본 논문에서는 터미널내의 환경상(시설)의 어려움을 극복하고 높은 고도에서 각 ULD에 장착된 RFID TAG을 인식할 수 있도록 DRONE에 LED-ID 와 RFID READER를 장착하여 관리하는 방안에 대해 고찰하고 그의 운영상의 예상효과와 제한 사항, 그리고 향후 연구방향에 대해 제시하고자 한다.

태그수추정에 기반한 동적 프레임 크기 할당 기법 (Dynamic Frame Size Allocation Scheme based on Estimated Number of Tags)

  • 임인택
    • 한국정보통신학회논문지
    • /
    • 제13권3호
    • /
    • pp.469-474
    • /
    • 2009
  • RFID 시스템은 식별되고자하는 사물에 부착된 태그들과 이를 인식하는 리더로 구성된다. 기존의 바코드 시스템과는 달리, 태그와 리더간에 접촉이 없이도 저장된 정보를 읽을 수 있는 특징이 있다. 이러한 비접촉 특성으로 인하여 RFID 기술은 다양한 응용 분야에서 바코드를 대신할 기술이 될 것이다. 13.56MHz 대역을 사용하는 대부분의 RFID 시스템은 리더 의 식별 영역에 있는 다중 태그를 식별하기 위하여 FSA 알고리즘을 사용한다. FSA 알고리즘인 경우, 식별 영역내에 있는 태그의 수와 프레임의 크기에 따라 태그식별 지연 시간과 시스템 효율이 크게 변화한다. 본 논문에서는 이러한 RFID 시스템에서 태그의 수를 추정하고, 추정한 태그의 수를 기반으로 프레임 크기를 동적으로 할당하는 기법을 제안한다.

고독사 방지를 위한 RFID 기반 적응형 모니터링 시스템 개발 (Development of RFID-Based Adaptive Monitoring System for the Prevention of Solitary Death)

  • 이주영;최현석;임승찬
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2022년도 춘계학술대회
    • /
    • pp.554-556
    • /
    • 2022
  • 최근 1인 가구의 급증에 따라 고독사가 중요한 사회 문제로 주목받고 있다. 본 논문에서는 고독사 위험에 노출된 사회적 약자들을 보호하기 위하여 RFID를 활용한 적응형 모니터링 시스템을 개발한다. 개발된 시스템은 웨어러블 RFID 태그, 주거지 내 부착된 RFID 리더기, 사용자 모니터링 앱으로 구성된다. 개발된 시스템은 웨어러블 태그를 지닌 사용자가 리더기가 부착된 장소에 머무는 시간을 측정하고, 적응적으로 결정된 임계치를 초과할 때 보호자에게 긴급 알림을 전송한다. 아두이노를 기반으로 거주지를 모델링한 프로토타입을 구현함으로써 설계된 시스템의 효용성을 검증하였다.

  • PDF