• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.5
• /
• pp.776-796
• /
• 2010

Integrated RFID-WSNs (wireless sensor networks) have recently been researched to provide object identities, sensing information, mobile service, and network functionalities. In integrated RFID-WSNs, the reader collision is one of the critical problems. Above all, due to the absence of universally applicable anti-collision protocols and the channel capture phenomenon, the medium access control protocols in integrated RFID-WSNs suffer from reader collision and starvation problems. In this paper, we propose an efficient MAC protocol, called EMP, to avoid the above problems in integrated RFID-WSNs. EMP is a CSMA-based MAC protocol which is compatible with sensor networks operating on integrated nodes which consist of an RFID reader and a senor node. EMP resolves not only the reader collision problem, but also the starvation problem using a power control mechanism. To verify the performance of EMP, we compared it with other anti-reader collision MAC protocols using simulations. As a result, the performance of EMP showed improvements in throughput, system efficiency, and energy consumption compared to the single data channel protocols (CSMA/CA, Pulse, and DiCa) in dense deployment environments.

• Journal of Information Processing Systems
• /
• v.11 no.1
• /
• pp.95-103
• /
• 2015

This paper presents a memory efficient tree based anti-collision protocol to identify memoryless RFID (Radio Frequency Identification) tags that may be attached to products. The proposed deterministic scheme utilizes two bit arrays instead of stack or queue and requires only ${\Theta}(n)$ space, which is better than the earlier schemes that use at least $O(n^2)$ space, where n is the length of a tag ID in a bit. Also, the size n of each bit array is independent of the number of tags to identify. Our simulation results show that our bit array scheme consumes much less memory space than the earlier schemes utilizing queue or stack.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.10A
• /
• pp.1015-1022
• /
• 2007

In this paper, dual-band digital codec for UHF(Ultra High Frequency) and MW(Micro Wave) is proposed for an RFID reader system. Most RFID systems have been supported only one protocol. But, There are many protocols of each bandwidth. Especially, UHF bandwidth which is widely used on the globe consists of A,B,C type, and more standards will be established. Recently, Since an interest about mobile RFID system is increasing, the RFID system with more than one protocol will be need. Therefore, this paper suggests a dual-band digital codec with UHF and MW bands for an RFID reader system. Standards used in this system are 18000-6C and 18000-4 standards. The digital codec is synthesize by the Quartus II compiler. Target device is EPC20Q240C8 which is family of CycloneII. Main Clock is 19.2MHz and elements of FPGA which is used for the system is 18,752.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.7
• /
• pp.752-760
• /
• 2010

This paper investigates the performance of EPCglobal Generation-2(Gen-2) radio frequency identification(RFID) protocol under reader-to-reader interfering environments. We establish a modified discrete-time Markov chain(DTMC) model for the Gen-2 and accordingly obtain quantitative results of query success rate(QSR) and tag identification speed (TIS). Extensive simulations validate our theoretical analysis and demonstrate that the number of tags over 100 has little impact on the performance. TIS linearly decreases by 10 tags/sec/reader as the number of interfering readers increases. Our model for Gen-2 protocol is also useful to study the performance of other RFID protocols.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8940-8947
• /
• 2015

Mixed-model assembly line has been widely used in automotive assembly industry to quickly respond the diverse product demands. But, this model can lead to part confusion, which is a source for assembly errors when parts are physically interchangeable in a mixed-model assembly line. With the recent application of new technologies such as radio frequency identification (RFID) and ZigBee wireless sensor network (WSN) to the assembly process, real-time information has become available in this manufacturing systems through IT infrastructures. At first, this paper presents an RFID application for assembly processes, specifically, for a mixed-model assembly line. Thus, to ensure that parts be picked accurately, each cockpit module on the assembly line is attached with a RFID tag and the tag is scanned using a RFID reader and recognizes the vehicle, and each part of the cockpit module is attached with a barcode and the barcode is scanned by a barcode reader and each part is identified correctly for the vehicle. Second, this paper presents a ZigBee wireless sensor network (WSN) protocol-based application for a reconfigurable mixed-model assembly line of cockpit module to reduce the assembly errors and the cost of the change/reconfiguration on the assembly lines due to the various orders and new models from the motor company, avoiding the wiring efforts and inconvenience by wiring between the several RFID devices and the IT server system. Finally, we presents the operation results for several years using this RFID/ZigBee wireless sensor network (WSN) protocol-based cockpit module assembly line.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.19 no.5
• /
• pp.59-69
• /
• 2009

RFID tag search system which is used to find a specific tag has an application such as asset management, supply chain, and this search scheme has been given much attention so far. In RFID tag search system, especially, mobility of the reader is important in order to search tags. Therefore, even though the handheld reader cannot connect with the central database because of unreliable wireless connection or remote location, handheld reader should search the specific tag without help of the central database. In addition, in RFID tag search system, users hold not the tag but the reader, the privacy of users should be considered. Since the signal strength of the reader is stronger than that of the tag, the privacy of the reader holder is very important. Recently, in order to solve these problems, a number of RFID tag search schemes have been proposed. However, since these schemes did not consider the privacy of reader holders, there are serious privacy breaches of reader holders. In this paper, we propose efficient RFID tag search protocol for passive tags. Our proposed scheme preserves the privacy of reader holders.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.19 no.2
• /
• pp.105-115
• /
• 2009

At the most recent, IPTV service is increasing, which isa communicative broadcasting fusion service that provides various multimedia contents interactively followed by user's request through super high-speed internet. For IPTV user service with high mobility, IPTV user's enrollment is essential. However, IPTV service provided to mobile users can't provide the certification of mobile user securely. This paper proposes light user certification protocol which can certificate mobile users by attaching RFID to IPTV STB for secure awareness of mobile users who get IPTV service. The proposed protocol prevent reply attack and man-in-the-middle attack from happening oftenin a wireless section by transmitting the result value hashed by hash function with both its' ID and random number received from tag after tag transmits random number which generated randomly in the process of certification of mobile user to IPTV STB.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.147-150
• /
• 2007

This paper presents an advanced RFID reader system implementing multi-protocols and multi-standards at 900MHz. In accordance with the strict regulations specified by ISO 18000-6 B-Type and EPC Global Gen 2, we have designed corresponding systemic factors which meet the domestic radio frequency utilizing bands of 910-914MHz. In addition, we develop numerous crucial factors of system compatibility options including SSB (Single-Side Band) and DSB (Double-Side Band) specifications, also OOK (On-Off Keying), ASK (Amplitude Shift Keying) and PR-ASK (Phase Reversed-Amplitude Shift Keying) modulation formula. Remarkable technical features of system in this paper can be the direct conversion routines using I/Q Modulation/Demodulation respectively, and Full-Duplex formulation operating at identical frequency bands.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.12
• /
• pp.1803-1810
• /
• 2013

In a warehouse, because there exist frequent changes of stock status and the quality of some contents are influenced by the environment such as temperature, fast and accurate management of the warehouse's environment is very important for Warehouse Management Systems. However, due to the absence of a unified standard for the communication protocol between RFID nodes and centralized MAC schemes for RFID communications in previous studies have severe problems. Therefore, in this paper, we propose a WiMedia MAC based RFID cooperative relay transmission scheme for warehouse management system applications.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.2
• /
• pp.207-214
• /
• 2012

This paper is to improve an identification ratio of tags by analyzing Slotted ALOHA, Dynamic Slotted ALOHA, Binary-tree and Query-tree and shortening the tag identification time in mobile RFID. Also, it enables the stable information transmission of tags by saving backscattering power of tags through shortening of identification time. As a result, this increases the available time of the battery and accessibility to a RFID service. For this, we proposed the energy-efficient tag anti-collision protocol for mobile RFID. The proposed scheme shows advanced result in identification time and collision counts. This scheme may be the first attempt for the mobile anti-collision.