• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.4
• /
• pp.414-421
• /
• 2013

In this paper, a novel IFF(Identification of Friend and Foe) landmine system has been designed and fabricated using RFID(Radio Frequency Identification) wireless communication system. The IFF landmine system is composed of RECOMS(Remote Controlled Munition System), RFID reader and RFID tag. When the friendly forces have been identified by RFID wireless communication, the IFF landmine is unloaded automatically and indicates the warning message to the operator. Through the discussion, the detailed designs and the test results of identification distance have been described and antenna revision plans for improving the performance have been mentioned.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.2
• /
• pp.202-207
• /
• 2013

RFID technology is applied to port logistics applications since it monitors objects wirelessly without line of sight and constructs ubiquitous system with low cost. Changes of stock status in the warehouse environment make the technology more important for managing such frequent storing and un-storing. Although the RFID has beneficial characteristics of low cost and low complexity, simultaneous responses of RFID tags cause tag identification collision due to absence of elaborate medium access control scheme. Several algorithms have been proposed to overcome the tag collision problem. However, it is difficult to adopt the methods to the logistics systems that has varying loads since there was no consideration on RFID tag's mobility. Therefore, we propose an efficient RFID tag anti-collision protocol, and simulation results demonstrate performance improvement by using the proposed scheme.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.241-244
• /
• 2005

본 논문에서는 UHF 대역 수동형 RFID 태그 안테나의 최적 설계에 필요한 요소들과 전파 음영 문제를 최소화 할 수 있는 다중 리더 안테나 방식에 대하여 분석하였다. 또한, 칩 설계시 RCS 특성이 우수한 칩 임피던스 범위를 설정해 보았으며, 등방성 방사패턴을 갖는 태그 안테나의 필요성과 설계 예를 보였다.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.432-435
• /
• 2007

In this paper, a dual band microstrip patch Antenna is designed for RFID Application. The antenna shows a good performance at the frequencies, 900MHz and 2.45GHz for the radiation characteristics and input impedance matching, as well. The reflection factor is lower than -25dB and a good directivity higher than 5dB is achieved for both frequency.

• Journal of information and communication convergence engineering
• /
• v.7 no.3
• /
• pp.335-339
• /
• 2009

RFID security and privacy issues have been intensively studied in the research field, the authentication between RFID reader and tag is the fundamental them. Most of the existing authentication protocols draw assumptions on classic primitives. Since tags have small capacities, the security mechanisms which are in use in computer networks and communication are not suitable. In this paper, we compare and analyze recent technical research on the problems of privacy and security. It consists of security mechanism, threats and performance evaluation, etc.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.1
• /
• pp.13-19
• /
• 2012

The use of RFID is recently increasing for the realization of Ubiquitous computing. Reducing the process time of tag recognition is crucial as RFID system has to recognize multiple objects in a short amount of time. In this manuscript, therefore, an effective scheme using multi-reader is suggested to improve processing speed for tag authentication in RFID system. According to the result of performance analysis, the processing time required for tag authentication was drastically reduced in multi-reader environment than it was in a single reader. Consequently, the use of the suggested scheme cuts down on the processing time while identifying tags by using multi-reader and bring about overall performnce improvement of RFID system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.3
• /
• pp.101-110
• /
• 2007

This study has designed a circular polarization antenna for UHF bandwidth RFID reader. As a result of performance test of the antenna designed it is found that return loss (S11) is about -45.529dB at 914MHz, which is relatively small, and antenna gain is about 6.09dBi. It has also been confirmed that $50{\Omega}$ impedance matching is about $50.48{$\Omega}$ and it can be applied to every RFID reader. Therefore, the antenna is designed to have higher gain of circular polarization by improving reception, which is one of the most important parameters of RFID reader and is expected to be extensively used to recognize multi-tag in the distance.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.12
• /
• pp.1201-1208
• /
• 2016

Radio Frequency Identification (RFID) technology has a significant attraction throughout various industry sites, along with the development of wireless communication technologies. The typical applications of RFID include medical, logistics, and distribution, and, specially, it is effectively applied to non-contact environments, because it employs radio waves. Although, recently, construction cases of the RFID management systems for the inventory management of the construction materials have been increased, the related researches and experiments for the reused materials are not actively performed. In this paper, we propose the RFID system with the localization function for effectively managing the reuse of the construction materials, adding to the conventional inventory management system. The proposed system consists of a RFID reader unit and a receiver unit, and the location information of the material with the attached RFID tag is obtained by estimating the position of a RFID reader. The distance value for estimating the reader position is calculated using the Received Signal Strength Indicator (RSSI) value of Zigbee, and the performance evaluation of the proposed system is performed in the indoor space of $5m{\times}5m$.

• Journal of electromagnetic engineering and science
• /
• v.11 no.1
• /
• pp.1-4
• /
• 2011

In this letter, we propose a novel tag antenna that has low performance degradation with nearby dielectric material. We obtained a stable reading performance and a broad matching bandwidth on nearby dielectric materials by employing a T-matching network with thick line width and capacitively slot-loaded arms. We then built the proposed antenna and measured the tag sensitivity to examine the reading characteristics with nearby dielectric materials. The measured results clearly demonstrate stable tag sensitivity with various nearby dielectric materials, such as foam, acrylic-plastic, glass, and ceramic plates. To more closely observe the antenna characteristics with nearby dielectric materials, we also examined the impedance variation and surface current distribution with respect to the dielectric constant of nearby target objects, which ranged from $1{\times}{\varepsilon}_0$ to $16{\times}{\varepsilon}_0$.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.547-549
• /
• 2014

In RFID systems, the performance for the tag identification is closely related with the tag collision, which is caused by the simultaneous transmission. The PS algorithm divides the tags within the identification range of reader into smaller groups by increasing the transmission power incrementally and identifies them. This algorithm uses the fixed frame size at every scan. Therefore, it is anticipated that the performance of PS algorithm can be variously shown according to the number of tags, frame size, and power level increase. In this paper, we analize the performance of PS algorithm according to the frame length and power level increase.