• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.4
• /
• pp.285-289
• /
• 2009

Small RFID tag antenna were fabricated on Si substrate and their physical and electrical properties were evaluated. With decreasing the size of tag antenna on Si substrate, small SMD-type RFID tags could be fabricated, which is very useful for various applications including PCB tracking. Firstly, electromagnetic properties on tag antenna pattern were simulated with HFSS. The setup frequency was 13.56 MHz of HF-band RFID. The line-width and line-gap were modeled in the range of $50{\sim}200{\mu}m$. S parameters, SRF, and Q value were calculated from the model. When the line-width and line-gap were 100 urn and the loop-turn was 10, the SRF was 80 MHz and the Q value was ca. 9. When the microstrip antenna pattern of aluminum was fabricated by using DC sputtering, Vpp of ca. 1.6 V was obtained when the reader-tag distance was 40 mm.

• Journal of Internet Computing and Services
• /
• v.9 no.1
• /
• pp.43-54
• /
• 2008

In this paper, we implement an automatic entity information management system for smart refrigerator using RFID technology in which objects containing electronic tags are automatically identified using radio wave. Unlike current "smart" refrigerators, the system presented in this paper implements smart tag information acquisition mechanism and real-time information management system to provide various information on entities in refrigerators to local and remote users. As the first step, this paper analyzes the requirements for smart refrigerator system based on the RFID and suggests design considerations. Based on the analysis, we propose and implement an efficient tag location tracking method based on antenna transfer method and an intelligent tag information management system based on embedded database and web server. We also provide a wide range of experimental results on the number of tags identified at a time and the tag recognition ratio according to the RFID antenna transfer speed and the angle between tag reader and tags.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.99-107
• /
• 2008

Recently route guiding system using GPS is spread widely. In the parking management system of complex mall, RFID is mainly used to control status of parking lots. However, in a case that a vehicle only with RFID tag enters into small market-populated district with service of parking lots, there is no parking route guiding system optimized with information of real tine status of parking lots and the system only with GPS can't provide a function of using real time status of parking lots. This paper proposes a location recognizing method of RFID tag object for parking control system to integrated several parking lots in the business district and database-linked route guiding system optimized for parking. The proposed location recognizing method makes the search of optimized parking route possible by abstracting decoding order of tag and antenna number and recognizing direction of tag linked with database. Ihe implemented system that is composed of RFID tag, reader, middleware, server, parking lot clients and mobile clients shows that the proposed method works well and it will be useful for integrated parking control system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.1A
• /
• pp.58-64
• /
• 2006

A 900-MHz band transceiver has been developed for RFID reader applications. In the transmitter, a GaAs SPST switch is used for high speed switching and low power consumption. In the receiver, a double balanced mixer is used to compress even-harmonic products. The ASK demodulator which consists of an active filter and comparator is used to reject the unwanted in band interferers. The transceiver produces a maximum transmitting power of 30 dBm and exhibits an 5 m communication range with a 6-dBi gain antenna.

• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.1053-1058
• /
• 2011

In this paper, we propose a concatenated single antenna diversity system to assure the data transmission reliability between flight type air nodes which move according to their atypical orbit, then analyze its performance. The proposed system achieve a diversity gain using single antenna and a coding gain from convolutional code simultaneously. Simulation result about the bit error rate(BER) of the proposed system shows that its BER performance is about 9.5dB greater than convolutional code at $10^{-4}$ and about 14dB greater than space time block code at $10^{-3}$ which has a full diversity gain. In addition, compared with space time trellis code with diversity gain and coding gain, the proposed system shows the better 4dB at a BER of $10^{-5}$. Therefore, it is necessary that concatenated single antenna diversity should be adopted to the reliable data transmission of flight type air nodes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.7
• /
• pp.3140-3145
• /
• 2012

In this paper, a design method for a compact slot antenna fed by a coplanar waveguide (CPW) is studied. A T-shaped tuning stub is inserted inside a narrow rectangular slot and the slot is impedance matched to the CPW feedline by adjusting the width, length, and position of the stub. The resonance frequency is adjustable by the slot length and the antenna size can be reduced by bending the slot. The resonance frequency and impedance matching property of the compact slot antenna are similar to those of the half-wavelength slot antenna, which enables one to design compact antenna of this type with ease. A compact slot antenna for 2.45-GHz ISM band is designed, fabricated on an FR4 substrate (dielectric constant of 4.4 and thickness of 0.8 mm), and experimentally tested. The measured results agree well with the simulations, which confirms the validity of this study. The fabricated compact slot antenna shows an impedance bandwidth of 200 MHz(2.32-2.52 GHz) for a VSWR < 2, which is suitable for 2.45-GHz ISM band (2.4-2.48 GHz). The measured radiation patterns show ${\infty}$-shaped directional pattern in the E-plane and nearly omni-directional pattern in the H-plane with a peak gain of 2.0 dBi, which are similar to those of a monopole antenna. The proposed antenna is expected to be suitable for the applications as antennas for WLAN, RFID, and mobile handset.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.4
• /
• pp.833-838
• /
• 2011

RFID system in manufacturing industry is used to collect, categorize, and process the data of products. To install RFID system for a large factory, a large amount of wired data communication network is necessary for RS232 communication. If the installed location of RFID system in the factory is changed or extended, a reinstallment is required for the already installed wired data network. A large amount of time/financial reinvestment is necessary for such reinstallation. By using wireless data communication network, however, the initial installation and reinstallation are very simple. In this paper, we implemented a wireless communication system and RFID system. We used the CC1020 chip for wireless communication system and EM4095 chip for RFID system. CC1020 chip enables highly-reliable data communication, and by setting a simple status register, it can switch between transmitting/receiving status and it can choose the desired frequency of either 400 MHz or 900 MHz. Also, Communication range is 50 m, if external antenna is used. EM4095 is a chip for RFID reader system with the carrier frequency of 125 KHz. This chip can implement the reader system by connecting a small number of components. And EM4100 was used for RFID system. EM4100 is read-only type. Atmega128 is used to control a wireless communication system and RFID system. We confirm that the system can communicate without error up to 50 m from sender. In the paper, the circuit diagram and operation program for CC1020 and RFID system are presented. The system used in the experiment is shown in pictures, and the data movement pattern of CC1020 is shown in the diagram, and the performance of each transmission method is presented.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.273-278
• /
• 2005

The characteristics of the tag antenna are influenced much with the change of the electrical properties of its substrate material, conducting metal-line and the surrounding environments. In this paper, we study the characteristics of tag antenna according to the electrical variations of those substrate materials, metal-line and the surrounding environmental conditions.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.3
• /
• pp.335-342
• /
• 2014

In this paper We study on test methods and procedures for Hybrid Track Circuit's practicalization. It's possible to apply to HTC's Seoulmetro and high-speed train by proposing test method considering special rail environment and RFID tag and leader, antenna We also present the test methods and procedures for safe and reliable of interface among the Hybrid track circuit devices.

• Proceedings of the KIEE Conference
• /
• 2008.05a
• /
• pp.157-158
• /
• 2008

In this paper, a dual band microstrip patch Antenna is designed for RFID Application. The antenna shows a good performance at the frequencys, 433MHz and 2.45GHz for the radiation characteristics and input impedance matching as well. The reflection factor is lower than 15dB and a good directivity higher than 3dB is achieved for both frequency.