• Information and Communications Magazine
• /
• v.21 no.6
• /
• pp.22-38
• /
• 2004

미국은 이라크 전에서 운송되는 군수품의 체계적 관리 및 전장에서의 인명손실을 광범위하게 추적하기 위해 RFID 기술을 적용함으로써 세계를 놀라게 했다. 현재는 전쟁터의 적과 아군(피아)의 구분을 위해 RFID 기술을 연구하고 있는 실정이다. RFID에 대한 세계의 진행은 다음과 같다. 미국은 MIT(메사추세츠 공대)를 중심으로 북미지역코드관리기관(UCC, Uniform Code Council), 국방성, 업체 등의 협력을 통해 Auto-ID 센터를 설립(1998년)하여 기술개발 및 상용화를 적극 추진 중이며, 일본은 사카무라겐교수를 중심으로 U-ID 센터를 설립하여 일본 독자적인 노선을 밟고 있다. 유럽 역시 독일회사인 매트로(Metro)의 Future Store 프로젝트, MyGrocer 프로젝트 등 활발히 진행 중에 있다.(중략)

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.1067-1070
• /
• 2009

It is important to control environment information such as temperature in distribution & logistics systems. To manage temperature and environment information in realtime, SCCM(Smart Cold Chain Management) system must manage and integrate tags and various types sensor information. But, it needs standard code system to manage and integrate various types tags and sonsors. In this paper, we propose standard code system to apply the SCCM system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.1B
• /
• pp.17-26
• /
• 2005

RFID(Radio Frequency IDentification) is a technology that automatically identifies objects attached with electronic tags by using radio wave. For the implementation of an RFID system, an anti-collision algorithm is required to identify several tags within the RFID reader's range. Few researches report the performance trade-off among anti-collision algorithms in terms of the communications traffic between the reader and tags, the identification speed, and so on. In this paper, we analyze both tree based memoryless algorithms and slot aloha based algorithms that comprise of almost every class of existing anti-collision algorithms. To compare the performance, we evaluated each class of anti-collision algorithms with respect to low-cost RFID system with 96-bit EPC(Electronic Product Code). The results show that the collision tracking tree algorithm outperforms current tree based and aloha based algorithms by at least 2 times to 50 times.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.6
• /
• pp.104-113
• /
• 2011

While converging USN Services, a single physical infrastructure can be used in several services and in several physical infrastructures can make up a single service. Therefore the physical infrastructure and service have to manage separately for effective convergence of USN Services. However, established Identification Scheme is not suitable to distinguish various services that USN provides. This paper suggests USN Service Identification Scheme that can be separated and managed. Through USN Service Identification Scheme suggested, firstly, it is possible to obtain Service Identification Scheme utilizing various technology such as RFID TAG, QR Code, radio broadcasting, etc. because it is possible to process USN Service Identification Scheme. Secondly, it is easy to mange the service, develope the user application program and interlock with established USN Standard technique as view from service provider. Thirdly, it is possible to manage systematically USN Service. Fourthly, users can search USN Service easily, so it can contribute actively for invigoration of USN service. This thesis, firstly, has analyzed about standard related USN Service and USN Identification Scheme. Secondly, this has suggested brand-new USN Service Identification Scheme based on established USN Identification Scheme.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.10
• /
• pp.841-851
• /
• 2013

Mobile RFID/NFC linkage technology means a provision of integrated 2 existing mobile RFID services by developing the 900MHz mobile RFID reader and the NFC reader/tag into one SoC to be put on a USIM card. In this paper, the mobile RFID related technologies that offer similar services as NFC were also analyzed to understand the potential linkage to NFC and the requirements for the linkage. In addition, the introduction of dual tag and the code system linkage suggested a linking method to maximally use the existing infrastructure and the requirement satisfaction was analyzed. Lastly, based on the analysis, the future direction for the new standard design was suggested.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.06a
• /
• pp.127-128
• /
• 2007

• Proceedings of the Korea Contents Association Conference
• /
• 2006.05a
• /
• pp.486-488
• /
• 2006

RFID 기술의 신속한 확산을 위해서는 태그의 저가격화, 초소형화, 저전력화, 보안 및 프라이버시 문제, 태그식별자의 표준화, 다중태그 식별문제등이 우선적으로 해결되어야 한다. 특히, 식별영역 내에 다수의 태그가 존재할 경우에 다중태그 식별(multi-tag identification)을 위한 충돌방지(anticollision) 알고리즘은 RFID 시스템 구축에 있어서 반드시 해결해야 하는 핵심기술이다. 기존의 충돌방지 알고리즘들은 구현의 복잡성과 낮은 성능이 문제로 제기되고 있으며 지금까지 충돌방지와 관련하여 진행된 대부분의 연구들은 각각 고유한 형태의 태그식별자 체계를 기반으로 진행되어 왔으며 태그식별성능에 대한 비교연구도 부족한 상태이다. 본 논문에서는 저비용(low-cost) RFID 시스템에서 현재 표준화가 진행되고 있는 96비트 EPC (Electronic Product Code) 코드를 기반으로 병원 환경에서 태그에 우선순위를 부여하여 충돌이 발생하면 우선순위가 가장 높은 것부터 읽어들일 수 있는 그룹 트리 알고리즘을 제안하였다.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.104-107
• /
• 2008

Recently the mobile RFID technique research is applied in the portion which is various with fusion of RFID technique and the mobile machine of communication alcoholic beverage of existing. As result of this research, the establishment of the new mobile RFID code system and research and development of retrieval system are advanced. Like this the retrieval system where researching and developing are advanced is appropriate in each application field and it is not applied there is a problem point. So the mobile RFID retrieval system which uses the product from the dissertation which it sees newly the area. It is a Lospector that it proposes and the retrieval system is appropriate in each service field and it is not applied to improve the problem point, it presents an efficient search technique.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.4
• /
• pp.106-116
• /
• 2011

It is very important to collect and manage labor information in the construction industry that is labor-intensive. Although research and cases that utilize RFID are increasing for more effective labor management, labor management is limited to the checking-in and -out information management at the entrance of a construction site due to high expense of an RFID reader. Labor and safety information is still managed based on the redundant process that is hand-written in a book and re-input of information by using a personnel-computer. Therefore, the objective of this paper is to develop more effective and efficient process for labor information record and management. This paper presents a prototype application that supports integrated labor information management by incorporating QR-code into RFID-based labor management system and verifies the application through a pilot test and comparison with the existing labor management syste.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2B
• /
• pp.210-214
• /
• 2010

Standard about OID(Object Identifier) to implement on Internet is discussed at ITU-T, ISO/IEC. The OID should be stored and searched for object on Internet, which is called 'ORS(OID Resolution System)'. The ORS is made by international standard for identifying RFID code types, and in the future would be discussed for USN, u-Health, etc. Therefore, this paper describes the current status of the international standard discussing ORS concept, system structure and protocol, the present issue of the ORS used for RFID and the method for USN services.