• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.4
• /
• pp.787-792
• /
• 2004

This paper shows the design, fabrication and performance of oscillator appled to 5.5GHz RF module for local wireless communication system. Super low noise HJ FET of NE3210S01 is used to obtain a good phase noise Performance. The design Parameters for the optimum operating performance are simulated with ADS simulation. The measured out Power is 10 dBm at 5.5GHz, the second harmonic suppression -31 dBc, and the phase noise characteristics -98.83 dBc at 100kHz offset frequency, respectively. This implemented oscillator is available to local wireless Communication system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.96-100
• /
• 2004

This paper shows the design, fabrication and performance of oscillator appled to 5.5GHz RF module for local wireless communication system. Super low noise HJ FET of NE3210S01 is used to obtain a good phase noise Performance. The design Parameters for the optimum operating performance are simulated with ADS simulation. The measured out Power is 10 ㏈m at 5.5GHz, the second harmonic suppression -31 ㏈c, and the phase noise characteristics -98.83 ㏈c at 100KHz offset frequency, respectively. This implemented oscillator is available to local wireless Communication system.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1133-1136
• /
• 2002

We designed and fabricated a low local oscillation (LO) power V-band CPW mixer module using a CPW-to-waveguide transition technology for the application of millimeter-wave wireless communication systems. The mixer was designed using a unique gate mixing architecture to achieve simultaneously a low LO input power, a high conversion gain, and good LO-RF isolation characteristics. The fabricated mixer exhibited a high conversion gain of 2 dB at a low LO power of 0 dBm. For data transmission of the 60 ㎓ wireless LNA systems, we fabricated a CPW-to-waveguide converter module of WR-15 type and mounted the fabricated mixer in the converter module. The fabricated V-band mixer exhibited a higher conversion gain and a lower LO input power than other reported V-band mixers.

• Journal of Advanced Navigation Technology
• /
• v.16 no.3
• /
• pp.449-454
• /
• 2012

According to the development of the ubiquitous computing technic today, the sensor base system is becoming a big issue in IT fields. This study is to develop a smart weather watching system which allows us to carry out temperature measuring without regard to location and altitude using the sensor devices. this system is composed of the wireless receiver module(PC base) and the wireless measuring module(ATmega2560 base).

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.4
• /
• pp.374-380
• /
• 2010

This paper proposes a wearable interface for a tendon-driven robotic hand prosthesis. The proposed interface is composed of a dataglove to measure finger and wrist joint angle, and a micro-control board with a wireless RF module. The interface is used for posture control of the robotic hand prosthesis. The measured joint angles by the dataglove are transferred to the main controller via the wireless module. The controller works for directly controlling the joint angle of the hand or for recognizing hand postures using a pattern recognition method such as LDA and k-NN. The recognized hand postures in this study are the paper, the rock, the scissors, the precision grasp, and the tip grasp. In experiments, we show the performances of the wearable interface including the pattern recognition method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.853-855
• /
• 2013

In this paper, we proposed the store monitoring system using smart hanger. This system consists of smart hanger, server, and wireless communication module. The smart hanger consists of LCD, MCU, RF module. In order to verify the effectiveness of the proposed smart hanger, we performed the experiment. This smart hanger can be used for shopping mall to increase sales.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.4
• /
• pp.45-50
• /
• 2008

Meter reading modules, which read the meter and transmit the data to water management offices, can't use the electric wires for their power supply. Therefore, batteries have to be used for meter reading modules and that cause maintenance problems like periodic batteries replacement. To save the maintenance cost, a wireless transmitting solution with less power consumption is required. In This paper, we designed a remote meter reading module, which reads meter automatically with less power consumption of battery by effective management of power source and transmits the reading data using RF.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.631-634
• /
• 2009

Recent advances in wireless communication, electronics, MEMS device, sensor and battery technology have made it possible to manufacture low-cost, low-power, multi-function tiny sensor nodes. A large number of tiny sensor nodes form sensor network through wireless communication. Sensor networks represent a significant improvement over traditional sensors, research on Zigbee wireless image transmission has been a topic in industrial and scientific fields. In this paper, we design a Zigbee wireless image sensor node and multimedia monitoring server system. It consists of embedded processor, memory, CMOS image sensor, image acquisition and processing unit, Zigbee RF module, power supply unit and remote monitoring server system. In the future, we will further improve our Zigbee wireless image sensor node and monitoring server system. Besides, energy-efficient Zigbee wireless image transmission protocol and interworking with mobile network will be our work focus.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.9
• /
• pp.912-917
• /
• 2006

A strain gauge weight measuring instrumentation system was designed with RF sensor network facilities. In the sensor module system data conversion and a series of signal processing were totally equipped. 16 strain gauges are incoming sensors and each output of the strain gauge was amplified and filtered for proper analog signal processing. Several measuring instrumentation OP amps and general purposed OP amps were used. 12 bits A/D converters converted analog signals to digital bits and a PIC microprocessor controlled the 16 channels of strain gauges. RF RS232 modules were used for wireless communication between the PIC microprocessor and an Ethernet host far a remote sensor monitoring system development.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.1
• /
• pp.60-65
• /
• 2006

Recently, various ubiquitous networking services are developed and implemented for easy living. In general, new ubiquitous networking services require the new infrastructure including equipments and devices. However, it is difficult to replace existing infrastructure and devices with new ones in the home or office because of cost and maintenance problems. In this paper, we developed small-size web based RF wireless communication systems for sensor network applications. The designed RF systems are implemented using commercial system on a chip (SoC) on existing infrastructure and devices. The developed systems are tested for light control and temperature sensing and they are applied to sensor network training courses for students and engineer as well as various practical applications.