• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.4 no.3
• /
• pp.45-53
• /
• 1993

The shielding effectiveness of materials is determined by measuring the ratio of the incident electromagnetic power to that which passes through the material under test. The measurement system is constructed using several test fixtures, tracking generator, spectrum analyzer, step attenuator, RF switches, and amplifiers, etc.. The automation of measurements is completed using a personal computer. Especially, incident power, reflected power, and transmitted power are measured with only one spectrum analyzer using a dual directional coupler and RF switches. Therefore the system is to be used in design of shielding materials, as well as shielding effectiveness measurements. This system has dynamic range of more than 120 dB in the frequency range of 10 MHz to 1 GHz, and it can be used to measure shielding effectiveness of composite materials.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.7
• /
• pp.730-735
• /
• 2004

This paper describes what brings about DC offset and the impact or the DC offset on the performance or direct-conversion mobile receiver in WCDMA system. The performance degradation of $E_{b}/N_{o}$ due to the DC offset is presented through simulation result. Direct-conversion RF Transceiver which has the function of DC offset control is implemented and then applied to the WCDMA test-bed for the performance evaluation. The receiver performance degradation of $E_{c}/I_{o}$ is evaluated and analyzed by varying DC offset value. The practical test showed the minimum requirement of DC offset value to meet system performance.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.1
• /
• pp.1-6
• /
• 2011

We have developed the process of forming one body S-type cantilever probe in the recessed trench for fine-pitched MEMS probe card. The probe (cantilever beam and pyramid tip) was formed using Deep RIE etching and wet etching. The pyramid tip was formed by the wet etching using KOH and TMAH. The process of forming the curved probe was also developed by the wet etching. Therefore, the fabricated probe is applicable for the probe card for DRAM, Flash memory and RF devices tests and probe tip for IC test socket.

• Bulletin of the Korean Space Science Society
• /
• 2003.10a
• /
• pp.106-106
• /
• 2003

인공위성의 전기적 호환성 해석은 인공위성의 각 유닛들에서 발생할 수 있는 잡음이 인공위성의 정상 동작에 미치는 영향을 분석하고 그 영향을 최소로 만들 수 있는 방안을 연구하기 위해 필요하다. 본 논문에서는 인공위성의 탑제컴퓨터와 탑제체 간의 인터페이스에서 전기 신호의 호환성 해석, Harness의 호환성 해석 그리고 radiation 해석이 이루어졌다. 인공위성의 탑제컴퓨터와 탑제체 간의 인터페이스에서 전기 신호의 호환성 해석은 전기 신호의 전압 레벨이 전압 히스테리시스의 경계 영역에서 충분한 여유를 가지고 있는지 판단하기 위해 필요하다. 전기 신호에 충분한 여유분이 없는 경우 여유분을 증가시키기 위한 방법이 제안되었으며 제안된 방법에 의해 인터페이스의 올바른 동작에 충분한 여유분이 생겼음이 시뮬레이션 결과에 나타났다. Harness의 호환성 해석은 다목적실용위성 2호에 사용된 Harness에 대한 conductive epoxy potting의 전도도를 검증하기 위해 이루어졌다. 본 논문에서는 전송 임피던스 측정 방법을 이용하여 epoxy potting의 전도성이 모든 주파수 영역에서 인공위성의 요구사항에 만족함을 보여준다. Radiation 해석은 인공위성 시스템의 radiated emission(RE)을 추정하고 S-band 수신기와 GPS 안테나와 같은 수신단에 대한 상호간섭에 의한 위험도를 분석하기 위해 필요하다. RF 수신기의 수신 대역에서 발생한 잡음의 영향으로 신호대잡음비가 허용수치이하로 감소하여 위성 명령을 수신하는 동작에 지장을 초래할 수 있다. 본 논문에서는 RF 수신단에 가장 큰 영향을 미칠 것으로 예상되는 star tracker의 RE test 결과를 분석하여 test 결과가 GPS 수신기와 S-band 수신기의 각각의 성능에 적합한지 해석하였다. 또한 solar array regulator의 스윗칭에 의해 발생되는 radiation이 위성 구조체에 미치는 영향을 해석하고 시뮬레이션 하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.11
• /
• pp.2465-2472
• /
• 2009

This research paper is to develop remote data transmission terminal which is adequate to RFID R/W by using UHF/RF RFID R/W module (WJR7090) and Bluetooth communication(FB755AC) with ARM chipset(AT91SAM7S256). The developed UHF RFID R/W terminal performs tagging of RPID value and transmit the value to server with Bluetooth communication, the transmitted RFID tag value is compared to the Database value and the result is transmitted to the terminal. Performance test was done in order to prove the performance of the terminal, and the test result of the terminal's excellency and transmitted/recevied packet is described.

• Journal of Biosystems Engineering
• /
• v.31 no.3 s.116
• /
• pp.182-187
• /
• 2006

Aerial application using an unmanned agricultural helicopter can reduce labor and pollution. The development of an agricultural helicopter became urgent for both precise and timely spraying. In this study, a rotor system for unmanned helicopter capable of 20 $kg_f$ payload, was developed and lift capability was evaluated. A lift force over the dead weight of the helicopter was obtained at the pitch angle of $6^{\circ}$. As the pitch angle increased to $8^{\circ}\;and\;10^{\circ}$, the total lift increased to $74{\sim}81\;kg_f\;and\;86{\sim}93\;kg_f$, respectively. A range of engine speed at the rated flight condition, lifting mean payload of 23 $kg_f$ was determined. The data acquired from this study will be used for designing tail system and RF console in the next stage of the research. The rated lift capability was enough for loading 20 liters of spray material including spraying equipments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.8
• /
• pp.1943-1949
• /
• 2010

In this paper, we developed a RFID tag antenna using one-sheet inlay pattern which consist of two different frequencies in one layer. The antenna in one-sheet inlay RFID tag does not use different kind RFID antennas in a card but implement 13.56MHz and 900MHz RFID tag antennas in one sheet. In order to evaluate the usability of proposed method, we configured test equipments and designed 6 different patterns and test the recognition distance of each pattern. Among the one-sheet inlay RFID tag antenna designs, the pattern no.5 has good performance with recognition distance of 5.34m at 900MHz and 3.5m at 13.56MHz.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2019.10a
• /
• pp.585-588
• /
• 2019

Predictions of Energy Consumption for Industries gain an important place in energy management and control system, as there are dynamic and seasonal changes in the demand and supply of energy. This paper presents and discusses the predictive models for energy consumption of the steel industry. Data used includes lagging and leading current reactive power, lagging and leading current power factor, carbon dioxide (tCO2) emission and load type. In the test set, four statistical models are trained and evaluated: (a) Linear regression (LR), (b) Support Vector Machine with radial kernel (SVM RBF), (c) Gradient Boosting Machine (GBM), (d) random forest (RF). Root Mean Squared Error (RMSE), Mean Absolute Error (MAE) and Mean Absolute Percentage Error (MAPE) are used to measure the prediction efficiency of regression designs. When using all the predictors, the best model RF can provide RMSE value 7.33 in the test set.

• International Journal of Aerospace System Engineering
• /
• v.9 no.1
• /
• pp.1-15
• /
• 2022

Pyrotechnic initiators provide a source of pyrotechnic energy used to initiate a variety of space mechanisms. Pyrotechnic systems build in electromagnetic environment that may lead to critical or catastrophic hazards. Special precautions are need to prevent a pulse large enough to trigger the initiator from appearing in the pyrotechnic firing circuits at any but the desired time. The EMC verification shall be shown by analysis or test that the pyrotechnic systems meets the requirements of inadvertent activation. The MIL-STD-1576 and two range safeties, AFSPC and CSG, require the safety margin for electromagnetic potential hazards to pyrotechnic systems to a level at least 20 dB below the maximum no-fire power of the EED. The PC23 is equivalent to NASA standard initiator and the 1EPWH100 squib is ESA standard initiator. This paper verifies the two safety margins for electromagnetic potential hazards. The first is verified by analyzing against a RF power. The second is verified by testing against a DC current. The EMC safety margin requirement against RF power has been demonstrated through the electric field coupling analysis in differential mode with 21 dB both PC23 and 1EPWH100, and in common mode with 58 dB for PC23 and 48 dB for 1EPWH100 against the maximum no-fire power of the EED. Also, the EMC safety margin requirement against DC current has been demonstrated through the electrical isolation test for the pyrotechnic firing circuits with greater than 20 dB below the maximum no-fire current of the EED.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.1
• /
• pp.1-10
• /
• 2023

In this paper, the design and implementation of the long-distance wireless transmission technology of high-definition video using domestic wireless communication technology for the existing wired-based CCTV surveillance system and IP camera system was evaluated for performance. The interworking test between the wireless multi-IP camera transmission terminal device and the wireless communication RF module, and the wireless multi-IP camera-based video transmission system integration interworking test confirm the module interworking suitability during video transmission.