• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.44-44
• /
• 2011

현존하는 초경도 박막물질 중 입방정 질화붕소(cBN)은 철계 금속과의 반응안정성 및 낮은 온도에서의 합성가능성 등 많은 장점을 가지고 있다. 그러나 필수로 수반되는 이온충돌 효과로 인해 박막 내 높은 잔류응력으로 인한 박리 현상으로 응용이 어려운 실정에 있다. 현재까지 이를 개선하기 위해 수소를 첨가하여 박막의 잔류응력을 줄이는 연구, B4C 타겟을 이용하여 B-C-N 의 gradient layer를 설계하여 점진적으로 잔류응력을 감소시키는 연구 등 많은 연구들이 진행되고 있다. 본 연구에서는 MOCVD로 만들어진 NCD(Nano Crystalline Diamond) buffer layer 위에 RF-UBM(unbalanced magnetron) PVD를 이용하여 BN을 증착시켰다. hBN 타겟을 이용하여 2mTorr에서 400W 의 RF 파워를 사용하여 기판에 RF bias를 인가해 실험하였다. cBN 박막과 기판의 lattice mismatch 를 줄이기 위해서 본 연구소에서 제공되는 NCD 기판을 사용하였으며, 다이아몬드 기판과 cBN 박막의 1:1 에피성장을 이루기 위해 상온에서부터 800도까지 온도 변화를 주어 cBN을 증착시켰다. FTIR(Fourier transform infrared spectroscopy)로 $sp^2$구조인 hBN과 $sp^3$구조인 cBN의 성장유무를 확인하였으며, FTIR peak intensity 차이로 박막내 cBN의 함량을 계산하였고, Scratch test로 박막과 기판사이의 밀착력을 상대적으로 비교하였으며, 격자의 에픽성장을 확인하기 위해 FIB 의 작업을 거쳐 HRTEM 으로 각 위치별로 SAD pattern를 이용하여 성장거동을 확인하였다.

• Journal of the Institute of Convergence Signal Processing
• /
• v.1 no.1
• /
• pp.89-96
• /
• 2000

In this paper, we propose a vision algorithm for the inspection of very small RF-chip inductor which is used in mobile-communication terminal. The proposed method divides coil part from the inductor body by local adaptive thresholding and integral projection method. After dividing work, the coil components are extracted by thinning and labelling techniques. The test items are the number of turns, the intervals in coil, and the measure of uniformity between the extracted lines. If the values of these are more than the specific value a tested product is decided bad one. In the simulation, the proposed method has a good performance.

• Nuclear Engineering and Technology
• /
• v.46 no.2
• /
• pp.247-254
• /
• 2014

A study on the superconducting RF linac is underway in order to increase the beam energy up to 1 GeV by extending the Proton Engineering Frontier Project (PEFP) 100-MeV linac. The operating frequency of the PEFP superconducting linac (SCL) is 700 MHz, which is determined by the fact that the frequency of the existing normal conducting linac is 350 MHz. A preliminary study on the beam dynamics showed that two types of cavities with geometrical betas of 0.50 and 0.74 could cover the entire energy range from 100 MeV to 1 GeV. An inductive output tube (IOT) based RF system is under consideration as a high-power RF source for the SCL due to its low operating voltage and high efficiency. As a prototyping activity for a reduced beta cavity, a five-cell cavity with a geometrical beta of 0.42 was designed and fabricated. A vertical test of the prototype cavity at low temperatures was performed to check the performance of the cavity. The design study and the prototyping activity for the PEFP SCL will be presented in this paper.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.177-181
• /
• 2004

It is as research about embodiment of MAC algorithm that is point of wireless LAN technology that is radio skill that is receiving present head of a family footlights, and embodied MAC that is algorithm that control modem Rf and host interface to level that existent common use radio AP and send-receive of high speed are available that embody function that is presented to IEEE 802.11 specs using H/W and S/W. When embody actually, tested module that embody actually using module modem and RF part because test is impossible after have common use product. Also, module that embody actually designed, and is expected to be utilized in radio LAN system construction of high speed late considering CRC and FCS ewer on channel.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.2
• /
• pp.148-157
• /
• 2015

In this paper, we propose a compact antenna hat to perform RF compatibility testing efficiently between the launch vehicle and ground stations. The proposed structure implements a small size and low loss using the conductive shield instead of the conventional RF absorber. The S-band antenna hat, which is fabricated for an inverted-F onboard antenna with the size of $74mm{\times}13mm{\times}16mm$, has the small enclosure of $88mm{\times}35mm{\times}44mm$, the return loss of 25.6 dB, the insertion loss of 0.26 dB, and the leakage loss of 49.4 dB at the center frequency of 2.25 GHz. The simulated and measured results show a good agreement.

• Korean Journal of Clinical Laboratory Science
• /
• v.39 no.1
• /
• pp.42-48
• /
• 2007

This study was carried out to review and evaluate anti-CCP ELISA assay for diagnostic in RA patients from an early arthritis clinic (EAC). The subjects were obtained from patients visiting the outpatient clinic of the Dept. of Rhumatology med.of P hospital in Daegu, during 6 months from July 1, 2006 to December 31, 2006. The subjects were 140 cases : 80 cases from RA patients (60 women and 20 men; mean age 58 years; range, 32-68 years) confirmed by clinical diagnostic. 39 cases of these RA patients were classified as having early RA (EAC). 50 cases (non-RA) did not fulfill the criteria for RA, and 10 cases were from healthy individuals. We performed the analysis with solid phase-ELISA method (ETI-max3000, Diasorin; Italy) for anti-CCP and Nephelometry assay (Roche/Hitachi 902 analyzer; USA) for RF. The results obtained were summarized as follows ; anti-CCP ELISA is more specific than RF Nephelometry assay (specificity 94% vs 90%) to diagnose RA patients with suspected EAC (early arthritis clinic). The combination test "anti-CCP and RF" had a very high specificity (specificity 98.3%, PPV; RA group 96%, EAC 95%), the difference was statistically significant (p<0.05). Anti-CCP ELISA had more sensitivity in EAC (Early arthritis clinic) patients than chronic RA patients (sensitivity 64% vs 24%, respectively), anti-CCP of RA group and EAC group was more specific than RF (anti-CCP PPV; 92%, 89% vs 89%, 81% respectively), the difference was statistically significant (p<0.05). The difference of antibody concetration between anti-CCP and RF for RA and the control group is statistically significant (p<0.05). In conclusion, anti-CCP ELISA testing may be useful if performed concomitantly with RF Nephelometry assay to diagnose RA patients with suspected EAC (early arthritis clinic).

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.6
• /
• pp.34-40
• /
• 2011

From the present paper researched about the Design of Image Rejection SSB Modulator for X-Band Monopulse RADAR using Waveguide Hybrid Coupler. Generally, SSB modulator mixes IF(RF) and LO signals, and then it converts to RF(IF) frequency band. In this case, in order to transmit one sideband from RF band, SSB modulator is demanded the removal of image and LO signal. The balanced mixer was designed using waveguide hybrid coupler and crystal mixer diode to mix LO and IF signal. And also the IF Amplifier was designed for IF(+) and IF(-) signal generation which have $90^{\circ}$ phase differences which are suitable in two crystal mixer diode inputs. In order to maintain a high electric reliability from high frequency band the waveguide and IF amplifier's case were manufactured with aluminum using deep brazing techniques. The test result of SSB modulator, LO and sideband signal rejection ratio were 14.2dB and 18.5dB respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.27 no.1
• /
• pp.69-75
• /
• 2023

Small communication devices used in the Internet of Things are vulnerable to various hacking because they do not apply advanced encryption techniques due to their low memory capacity or slow computation speed. In order to increase the authentication reliability of small-sized transmitters operating in 433MHz band, we introduce an RF fingerprint and adopt a convolutional neural network (CNN) as a classification algorithm. The preamble signal transmitted by each transmitter are extracted and collected using software-defined-radio to constitute a training data set, which is used for training the CNN. We tested identification of 20 transmitters in four different scenarios and obtained high identification accuracy. In particular, the accuracy of 95.8% and 92.6% was obtained, respectively in the scenario where the test was performed at a location different from the transmitter's location at the time of collecting training data, and in the scenario where the transmitter moves at walking speed.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.1
• /
• pp.51-60
• /
• 2018

Objectives: Currently, there is only limited knowledge regarding the hazard of low-level exposure to CMR materials in workplaces. To overcome this limitation, a reference concentration for workers($RfC_w$) from among the risk assessment tools proposed by the US EPA is widely used to set a provisional workplace exposure level(PWEL) for CMR materials for which there are no established Korea Occupational Exposure Limits(KOELs) or subjective chemicals for work environment measurements as regulated by Korea Ministry of Employment and Labor(KMOEL). A simple European calculator of derived no effect level(SECO-DNEL) as proposed by REACH can also be used in place of $RfC_w$ to set the PWEL for chemicals. This study was performed to test the acceptability of using SECO-DNEL as an alternative to $RfC_w$ when setting a PWEL for low-level exposures. Methods: The $RfC_w$ and DNEL for the five CMR materials of dinitrogen oxide, catechol, 2-phenoxy ethanol, carbitol, and carbon black were calculated using the dose-response assessments of the US EPA for $RfC_w$ and REACH guidance for SECO-DNEL, respectively. They were compared using paired t-tests to determine the statistical differences between them. Results: For the five chemicals, the $RfC_w$ were 2.53 ppm, 0.10 ppm, 1.73 ppm, 1.66 ppm, and $0.05mg/m^3$, respectively, while the SECO-DNEL were 2.01 ppm, 0.11 ppm, 1.83 ppm, 1.77 ppm, $0.14mg/m^3$, respectively. There was no statistically significant difference between $RfC_w$ and SECO-DNEL. Conclusions: This study suggests that the SECO-DNEL could be applied in place of $RfC_w$ to set a PWEL for low-level exposure to chemicals, especially CMR materials. To further ensure the reliability of SECO-DNEL as an alternative tool, more chemicals should be applied for calculation and comparison with $RfC_w$.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2003.10a
• /
• pp.243.1-243.1
• /
• 2003