• Journal of Aerospace System Engineering
• /
• v.17 no.1
• /
• pp.68-78
• /
• 2023

In this paper, improvement measures were studied for false alarm (abnormal lighting) of emergency hydraulic warning light due to RF radiation signals in aircraft. When the warning lamp of the emergency hydraulic system is lit during flight due to electromagnetic interference caused by RF radiation signals, it affects flight mission and safety which can result in efficiency degradation and maintenance of flight mission. For false alarm of emergency hydraulic warning light, root cause analysis and troubleshooting were carried out. By shielding a composite strip under fuselage of the aircraft located in the path of the RF radiation signal, the RF radiation signal flowing into the emergency hydraulic indicator was blocked. Results of applying the improvement method through ground and flight monitoring were also described.

• Journal of IKEEE
• /
• v.3 no.1 s.4
• /
• pp.69-78
• /
• 1999

In this paper, direct conversion receiver was designed to even harmonic anti-paralled diode pair ring mixer. Using a second harmonic component of LO instead of LO signal and RF signal are mixed by SHP(Sub Harmonic Pumped) mixer with anti-parallel diode pair. Canceling the harmonics of LO signal in ring mixer, SHP mixer using anti-parallel diode pair could mostly reduce the radiation of LO signal through a input port the most, good isolation characteristic, and low spurious characteristic by LO signal was shown over broad band. The produced SHP mixer showed LO/IF, RF/IF and LO/RF isolation was 24.6dB,36.2dB and 22.5dB respectively. And conversion loss was measured 15.6dB, IF output -35.6dBm with -20dBm RF input and 5.5dBm LO signal. 1dB compression point of If signal, in respect to RF signal, was found at the 0dbm RF signal.

• Journal of Aerospace System Engineering
• /
• v.16 no.3
• /
• pp.73-83
• /
• 2022

The purpose of this paper was to identify a method to improve received noise in a specific frequency band, caused by RF radiation signals during aircraft operation. The communication equipment of the aircraft is critical to the performance and safety of the flight mission, as it is responsible for the function of internal and external communications. Noise-free, clean communication quality, as well as transmission and receiving functions have to be implemented. Thus, the cause analysis of the reception noise in a specific frequency band, was analyzed through trouble shooting. The receiving noise due to the RF radiation signal emitted from the subsystem unit inside the aircraft, was improved by shielding with a CAP with electroless nickel plating applied. Additionally, the measurement and verification results of the improvement method are also described.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.3
• /
• pp.246-252
• /
• 2013

This paper presents method to suppress signal interference by using the filter in the RF output stage of the radiation equipment as a way to avoid interference between the RF(Radio Frequency) equipment mounted on aircraft. Especially filter design to suppress harmonics of the radiation equipment and testing method to verify the filter's performance is presented. Filter was installed at RF output stage of U/VHF radio in order to prevent interference between U/VHF(Ultra/Very High Frequency) radio and data link system. Filter design and testing method in this paper will be able to give help in the design of aircraft equipments as a tool that can be used to establish measures for problem of interference in the aircraft.

• Journal of Communications and Networks
• /
• v.15 no.4
• /
• pp.383-397
• /
• 2013

In this paper, the sensitivity of massive antenna arrays and digital beamforming to radio frequency (RF) chain in-phase quadrature-phase (I/Q) imbalance is studied and analyzed. The analysis shows that massive antenna arrays are increasingly sensitive to such RF chain imperfections, corrupting heavily the radiation pattern and beamforming capabilities. Motivated by this, novel RF-aware digital beamforming methods are then developed for automatically suppressing the unwanted effects of the RF I/Q imbalance without separate calibration loops in all individual receiver branches. More specifically, the paper covers closed-form analysis for signal processing properties as well as the associated radiation and beamforming properties of massive antenna arrays under both systematic and random RF I/Q imbalances. All analysis and derivations in this paper assume ideal signals to be circular. The well-known minimum variance distortionless response (MVDR) beamformer and a widely-linear (WL) extension of it, called WL-MVDR, are analyzed in detail from the RF imperfection perspective, in terms of interference attenuation and beamsteering. The optimum RF-aware WL-MVDR beamforming solution is formulated and shown to efficiently suppress the RF imperfections. Based on the obtained results, the developed solutions and in particular the RF-aware WL-MVDR method can provide efficient beamsteering and interference suppressing characteristics, despite of the imperfections in the RF circuits. This is seen critical especially in the massive antenna array context where the cost-efficiency of individual RF chains is emphasized.

• Journal of information and communication convergence engineering
• /
• v.6 no.1
• /
• pp.51-54
• /
• 2008

The defected ground structure (DGS) for microstrip structure can be used to protect analog/RF signal from SSN interference of digital circuits on PCB with common ground. However, the basic DGS gives rise to undesired emissions that may interfere with nearby circuitry due to the ground discontinuity. In this paper, we have proposed the modified structure, Corrugated DGS and the method to reduce the radiation by adding the lumped resistor on the proposed Corrugated DGS.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.666-670
• /
• 2015

This paper presents radiation pattern reconfigurable antenna for Fitbit Flex wristband which detects vital signal. Also, the paper presents Specific Absorption Rate (SAR) from the loop-dipole radiation pattern reconfigurable antenna based on the position of human body. The proposed loop-dipole radiation pattern reconfigurable antenna produces two opposite side direction radiation pattern using two RF switches. The resonant frequency of the radiation pattern reconfigurable antenna is Bluetooth communication bandwidth (2.4 - 2.485 GHz) and the maximum gain of the proposed antenna is 1.96 dBi. The proposed antenna satisfied the standard SAR value of 1.6 W/kg in 1 g tissue of the human body when the Bluetooth communication input average power of 0.04 W is excited to five parts of human body (head, chest, stomach, back, wrist). The maximum SAR value of in this simulation is presented in the part of head.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.2
• /
• pp.269-273
• /
• 2013

This paper analyzed a potential interference of electric equipments on radio service below 30MHz through an experiment with a PDP(Plasma Display Panel) TV and a RF(Radio Frequency) light bulb in an anechoic chamber. The radiation levels of the PDP TV and the RF light bulb are measured and a combined interference is calculated on the basis of the experimental value. As a result, the combined interference signal level is increased according to the number of interferer. The possibility of a potential interference from electric equipments on radio service below 30MHz is realized through comparison between the measured radiation value of electric equipments and the CISPR(International Special Committee on Radio Interference) 11 limit.

• Aerospace Engineering and Technology
• /
• v.8 no.1
• /
• pp.187-196
• /
• 2009

Synthetic Aperture Radar(SAR) satellite system for broad-area imaging has RF systems including SAR radiating a high power, data link system transmitting the acquired image data from the SAR, TC&R(Telemetry, Command, and Ranging) to communicate with a ground segment to control a satellite. Each system transmits RF signal having various frequencies and radiates a high power, RS(Radiated Susceptibility) specification should be verified at an electronic unit mounted in satellite. RF interference can be happened because of non-linearity of a RF system. Therefore, we manufactured a structure model installed antennas which have a similar pattern with a real antenna, the effect by RF interference is analyzed and verified.

• Journal of information and communication convergence engineering
• /
• v.1 no.1
• /
• pp.44-47
• /
• 2003

The split ground structure for microstrip structure can be used to protect analog/RF signal from SSN interference of digital circuits on PCB with common ground. However, the split ground structure gives rise to undesired emissions that may interfere with nearby circuitry due to the ground discontinuity. In this paper, we have proposed the modified structure, Dumbbell shaped SGS and the method to reduce the radiation by adding the lumped resistor on the proposed Dumbbell shaped SGS.