• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.12
• /
• pp.1315-1320
• /
• 2015

In this paper Communication data link equipment on a high speed-hopping method to use the frequency resources efficiently for the frequency environment is introduced such as sensing techniques, using the same frequency band by using the received two-channel technique and the receive filter bank unit applied to be shared with other equipment such as radar and so on. The real-time measurement and analysis were operated for measurement the frequency environment of the operating band in advance. and primarily equipment to develop is analyzed how the interference effect to the radar minimize the operation of radar equipment. In reverse, to use the same frequency band the methods such as frequency sharing techniques are presented in this paper. Finally, by design of the main items of the RF transceiver NF, transmission output, and a simulation of the IMD, such as whether the key is verified prior to meet specifications.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.4
• /
• pp.35-42
• /
• 2011

Link quality assessment is a crucial part of sensor network formation to stably operate large-scale wireless sensor networks (WSNs). A stability of path consisting of several nodes strongly depends on all link quality between pair of consecutive nodes. Thus it is very important to assess the link quality on the stage of building a routing path. In this paper, we present a link quality assessment method, Hybrid Link Quality Metric (HQLM), which uses both of LQI and RSSI from RF chip of sensor nodes to minimize set-up time and energy consumption for network formation. The HQLM not only reduces the time and energy consumption, but also provides complementary cooperation of LQI and RSSI. In order to evaluate the validity and efficiency of the proposed method, we measure PDR (Packet Delivery Rate) by exchanging multiple messages and then, compare PDR to the result of HQLM for evaluation. From the research being carried out, we can conclude that the HQLM performs better than either LQI- or RSSI-based metric in terms of recall, precision, and matching on link quality.

• ETRI Journal
• /
• v.19 no.3
• /
• pp.116-140
• /
• 1997

The base station transceiver subsystem (BTS) of the CDMA Mobile System is interfaced to mobile stations over the air and to the wired network through a packet switched interconnection network. The potential benefits of CDMA technology are achieved when the transmitter and the receiver are properly designed and implemented. The physical layer of the interface at the base station is implemented with the CDMA ASICs and control circuits in channel card of the BTS. We present the design perspectives and structural illustration of the BTS. Base station modem ASICs and their control to implement the CDMA receiver, Baseband and RF signal processing blocks, and BTS controller are described. Elaborate power control is essential to ensure the high capacity which is one of advantages of the CDMA technology. The closed loop reverse link power control and the forward link power control operated in the BTS are described.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1960-1963
• /
• 2002

Transmit diversity schemes we an effective capacity improvement method for down link of wideband code division multiple access (W-CDMA) systems. In this paper, we propose to use transmit antenna subset selection scheme in conjunction with closed loop transmit adaptive array (TxAA). The proposed scheme selects N$\_$s/ optimum antennas among N$\_$${\gamma}$/(>N$\_$s/) transmit antennas in order to maximize diversity gain from selected antennas, and also reduces the cost of RE chains by employing two different types of RF modules fur the selected and the unselected antenna group, respectively. Computer simulation results show performance improvement by the proposed scheme over the conventional TxAA when considering up link control information feedback.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.69.6-69
• /
• 2001

The SSPA makes the power level of EIRP up to 16W, and compensates for temperature to the SSPA´s maximum stability. The up and the down converters are dually conversed like as individual synthesizers for selecting of independent transmit-receive transponder. The function of the up-converter is to convert the 70MHz IF signal modulated in the indoor unit modem into a 14.0 ∼ 14.5 GHz Ku-band up-link signal to be sent to the antenna. The down-converter converts the 12.25 ∼ 12.75 GHz Ku-band down-link signal or a trouble malfunction of SSPA may be a fatal factor to operation of the whole satellite communication network. Therefore, this study developed the remote monitoring and control program to monitor the SSPA´s status before the problem occurs for stable operation of the system. This software ...

• Journal of IKEEE
• /
• v.13 no.4
• /
• pp.103-109
• /
• 2009

We report an efficient jitter reduction technique in an analog fier-optic link employing a Mach-Zehnder modulator followed by an erbium-doped fiber amplifier. By adjusting the modulator-bias to $0.089V_{\pi}$, we could increase the RF gain up to 10.65 dB for 10 GHz RF signal and reduce the random jitter by 46.5%, max, at an input optical power of -0.11 dBm to the EDFA.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4A
• /
• pp.350-357
• /
• 2005

DSRC provides high speed radio link between Road Side Equipment and On-Board Equipment within the narrow communication area. In this paper, a 5.8 GHz up-conversion mixer for DSRC communication system was designed and fabricated using 0.8 m SiGe HBT process technology and IF/LO/RF matching circuits, IF/LO input balun circuits, and RP output balun circuit were all integrated on chip. The chip size of fabricated mixer was $2.7mm\times1.6mm$ and the measured performance was 3.5 dB conversion gain, -12.5 dBm output IP3, 42 dB LO to If isolation, 38 dB LO to RF isolation, current consumption of 29 mA for 3.0 V supply voltage.

• Journal of Electrical Engineering and information Science
• /
• v.2 no.3
• /
• pp.95-98
• /
• 1997

A nonlinear optical-microwave interaction is carried out in an uniplanar CPW-to-Slotline ring resonator on the semi-insulating GaAs substrate, in which a Schottky photodetector is monolithically integrated as a coupling gap. When the capacitive reactance of the detetor is modulated, the parametric amplification effect of the mixer occurs. In this device structure, the parametric amplification gain of 20 dB without the applied bias in RF signal is obtained. This microwave optoelectronic mixer can be used in the fiber-optic communication link.

• Journal of Advanced Marine Engineering and Technology
• /
• v.35 no.5
• /
• pp.667-674
• /
• 2011

Data networks at sea will be overlapped networks with not only traditional carriers such as RF, satellites but also BWA like wireless LAN, WiBro, and WCDMA in near future. In this paper, an overlapped MANET model for data networks at sea, and a routing protocol (OMH-MW) selecting optimal transmission medium for each hop in routes are proposed. OMH-MW measures the optimality of each medium regarding the transmission characteristics of each application and those of the medium in together. The most suitable medium to each link is selected as the link in routes. Performances are compared with those of the MWR (Max-Win based Routing protocol searching optimal routes with only one medium).

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.4
• /
• pp.479-486
• /
• 1999

In this paper the system performance degradation resulting from nonlinear transmitter power amplifier which is essential to increase the efficiency is analyzed in a forward link CDMA system. The power amplifier is modeled by power series model which includes only odd-order terms. The effects of power amplifier's nonlinearity such as intersymbol interference, phase distortion on the RF system performance were visualized by examining the distorted time domain waveforms, signal vector constellation. And through the investigation of the power spectrum density of the transmitted signal, spectral regrowth or sideband regrowth which is result from amplitude distortion can be seen. All these characteristics result in BER performance degradation due to other user interferences and intersymbol interference. The analysis technique described here applies not only to power amplifier but also to any other nonlinear components such as mixers and switches. Also the effects of adjacent channel interference and supurious emission can be analysed between different systems.