• Journal of Korea Multimedia Society
• /
• v.21 no.4
• /
• pp.493-498
• /
• 2018

In this paper, we provide the performance analyses of a dual-hop amplify-and-forward(AF) relay transmission composed of asymmetric radio-frequence(RF) and free-space optical(FSO) links. In the mixed RF/FSO system, a relay is equipped with two receive antennas for RF signals and one additional transmit antenna for FSO signals. In order to improve a performance of RF link, a switch-and-stay (SSC) diversity technique is applied at the relay which can provide a proper link performance with a low complexity. Specifically, we offer the performance analyses of the proposed system in terms of outage probability and secrecy outage probability. In numerical examples, we compare the system performances with no diversity and selection combining systems and verify our analytical results via computer-based Monte-Carlo simulations.

• Current Optics and Photonics
• /
• v.3 no.5
• /
• pp.365-373
• /
• 2019

This paper investigates the performance of a hybrid single input multiple output radio frequency/free-space optics (SIMO-RF/FSO) communication system. Each SIMO-RF link is modeled as an independent and identically distributed (i.i.d.) Rayleigh distribution, while the FSO link follows a generalized $M{\acute{a}}laga$ (M) distribution. Considering the fixed gain amplify-and-forward (AF) relay and misalignment errors, novel expressions for the outage probability (OP), average bit error rate (ABER) and average capacity are derived. Numerical results show that atmospheric turbulence and misalignment errors can seriously impair the system performance, and the hybrid RF/FSO communication system using SIMO-RF links can greatly improve system performance. We also analyze system performance under different types of modulation schemes. Numerical results are verified by Monte Carlo simulations.

• 전자공학회논문지 IE
• /
• v.45 no.1
• /
• pp.38-43
• /
• 2008

This paper presents a new interference cancellation method to remove the oscillation due to feedback signal of RF relay. In this paper, we estimate the feedback signal using to LMS(Least Mean Square) algorithm and remove the interference through attenuation signal arbitrary corresponding to feedback signal. From the various performance analysis for various doppler effects, a proposed method prevents from oscillation using -30dB attenuation signal as a cancellation value of feedback signal.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.11 no.3
• /
• pp.173-181
• /
• 2016

Several falling-sensing terminals have been developed which are able to detect the fall/upset accident of the elderly and transmit the collapsing signals to the administrative server via RF communication using 400MHz bandwidth. Supposing there might be no communication problem within a sanatorium, just single terminal without relay function had been made as a prototype in the first stage of development. However some communication problems have discovered at the coner of the floor apart from the other floor diagonally in the same building. Same kind of problems have been happened in the area behind a steel fence or a car. To solve these kinds of communication problems, we have developed several terminals and added up relay function to them. In this paper we represented that the success ratio of the communication has been improved by using relay function among several terminals.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.11
• /
• pp.4623-4643
• /
• 2015

This paper considers physical-layer security protocols in multicast cognitive radio (CR) networks. In particular, we propose dual-hop cooperative decode-and-forward (DF) and randomize-and-forward (RF) schemes using partial relay selection method to enhance secrecy performance for secondary networks. In the DF protocol, the secondary relay would use same codebook with the secondary source to forward the source's signals to the secondary destination. Hence, the secondary eavesdropper can employ either maximal-ratio combining (MRC) or selection combining (SC) to combine signals received from the source and the selected relay. In RF protocol, different codebooks are used by the source and the relay to forward the source message secretly. For each scheme, we derive exact and asymptotic closed-form expressions of secrecy outage probability (SOP), non-zero secrecy capacity probability (NzSCP) in both independent and identically distributed (i.i.d.) and independent but non-identically distributed (i.n.i.d.) networks. Moreover, we also give a unified formula in an integral form for average secrecy capacity (ASC). Finally, our derivations are then validated by Monte-Carlo simulations.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.4
• /
• pp.491-497
• /
• 2015

In this paper a method of design and Implementation of RFID based control system for reducing standby power consumption at the power outlet is described. The system is composed of a RF controlled power outlet having relay and an active RFID tag communicating with the RF reader module controlling the relay. When the tag carried by human approaches to the RF reader the reader recognizes the tag and switch off the relay based on the RSSI level measurement. A low power packet prediction algorithm has been used to decrease the DC power consumption at both the tag and the RF reader. The result of experiment shows that successful operation of the relay control has been obtained while low power operation of the tag and the reader is achieved using above algorithm. Also setting the distance between the reader and the tag by controlling transmission power of the tag and adjusting the duty cycle of the packet waiting time when the reader is in idle state allows us to reduce DC power consumption at both the reader and the tag.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.21 no.8
• /
• pp.462-467
• /
• 2009

Researches and developments on BEMS are performed world-widely through sustainable management in various conditions. However, there are many obstacles to adapt the system in existing buildings because it needs highly expensive equipments, which are designed for newly built buildings, to install. Therefore, there are numerous limits exist when applying the BEMS in established buildings. The purpose of this study estimates the optimization of RF output power in WSN(Wireless Sensor Networks), which is the essential technology to develop PEMS. The results of this study is as follows ; 1) Applying WSN technique in buildings was possible. 2) As RF output power increases, the number of relay node reduced, therefore, the WSN showed more stability. 3) When estimating optimal RF output power in school, it should be considered between the number of relay node and RF output power. 4) Considering battery consumption and possibility of reception, the best suited RF output power is -20dbm in apartment house.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.10
• /
• pp.1849-1854
• /
• 2017

Recently, RF energy harvesting, in which energy is collected from the external RF signals, is considered as a promising technology to resolve the energy shortage problem of wireless sensors. In addition, it is important to guarantee secure communication between sensors for implementing Internet-of-Things. In this paper, we propose a power splitting-based network analog coding for maximizing a physical layer security in 2-hop networks where the wireless-powered relay can harvest energy from the signals transmitted by two sources. We formulate systems where two sources, relay, and eavesdropper exist, and find an optimal power splitting ratio for maximizing the minimum required secrecy capacity using an exhaustive search. Through simulations under various environments, it is demonstrated that the proposed scheme improves the minimum required secrecy capacity by preventing the eavesdropper from overhearing source signals, compared to the conventional scheme.

• Convergence Security Journal
• /
• v.8 no.3
• /
• pp.73-81
• /
• 2008

We can find easily about researches or technical development that deal with grasping the location of an object with GPS(Global Positioning System) in order to use them as a useful information. Most researches or technical development on application of tracing have been developed for the purpose of tracing objects in broad area as physical distribution or transportation, but recently, there are many researches on tracing materials in premise area as a fork lift, carts, or the equipment of work. In general, a system that utilizes location information of objects needs data communication network to transmit location data and it ensures data communication network by using common networks(SK, LG, KFT) or wireless LAN. However these two methods need monthly payment for the rental fee or require considerable amount of investment for the early stage so it is difficult to use them merely for tracing premise subjects. This study was conducted to build a tracing system for premise area by local area RF relay algorithm with low cost applying RF relay algorithm to local area wireless communication(ZIGBEE, 424MHz, Bluetooth, 900MHz) system in order to supplement these demerits and included relay algorithm, RF locating information terminal, local area RF gab-fillers, a plan for collection server of locating information, and the way of realization as they are needed in this system. I consider that this study would be applicable with flexibility in the industry area that needs tracing solution within a specific area or needs ensuring data communication network, to transmit data in ubiquitous environment, by easier and more rapid way with lower cost.

• KSCI Review
• /
• v.14 no.2
• /
• pp.129-134
• /
• 2006

In this paper, we designed and implemented DCS terminal remote monitoring middleware for real-time auditor and management terminal status signal with relay and fuse status at power management room. The middleware consist of four component as event analyzer, event manager, service manager and user interface. We expected economic effects extend relay life-time that pre-detected errors and prevented relay fault.