• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.12
• /
• pp.78-83
• /
• 2010

In this paper, a novel dual-band power amplifier using metamaterials has been realized with one RF GaN HEMT diffusion metal-oxide-semiconductor field effect transistor. The CRLH TL can lead to metamaterial transmission line with the dual-band tuning capability. The dual-band operation of the CRLH TL is achieved by the frequency offset and the nonlinear phase slope of the CRLH TL for the matching network of the power amplifier. We have managed only the second- and third-harmonics to obtain the high efficiency with the CRLH TL in dual-band. Also, the proposed power amplifier has been realized by using the harmonic control circuit for not only the output matching network, but also the input matching network for better efficiency. Two operating frequencies are chosen at 900 MHz and 2140 MHz in this work. The measured results show that the output power of 39.83 dBm and 35.17 dBm was obtained at 900 MHz and 2140 MHz, respectively. At this point, we have obtained the power-added efficiency (PAE) and IMD of 60.2 %, -23.17dBc and 67.3 %, -25.67dBc at two operation frequencies, respectively.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.225-228
• /
• 2004

This paper has been studied about UWB(Ulra wide-band)'s LNA(Low Noise Amplifier) and Mixer. The UWB is a new technology that is being pursed for both commercial and military purposes. Direct conversion architectures that convert RF signals have potential to achieve such terminals, because they eliminate the need for non-programmable image-rejection filters and IF channel filters. And this architecture promises better performance in power, size, and cost than existing heterodyne - based receivers. This Receiver architectures combines low-noise amplifier, mixer. And then this paper has designed suitable UWB's LNA and Mixer.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.8 no.1
• /
• pp.12-17
• /
• 2009

In this paper, We play it for the purpose of study about the power amplifier which applied DGS and adaptive bias circuit structure to general Doherty amplifier for the efficiency of a RF power amplifier and a linearity improvement in the WiBro band. As for the IMD3, 3.4dBc was improved with -26.3dBc when we did the measurement result existing Doherty power amplifier and comparison of the Doherty power amplifier which applied an adaptive bias circuit and the DGS which proposed in this paper, and the mean power efficiency verified what was increased in 37%. Also, we were able to know PAE of 36.6% with output power 34.0dBm in P1dB when magnitude of an input signal was 25.6dBm. we did 6dB back off in output P1dB in order to confirm the ACPR which was a nonlinear characteristic and measured the ACPR. we showed the -34.55dBc which was a value of -34.5dBc or below in the 4.77MHz off-set that was a transmission standard. Therefore, we were able to know that we were satisfied with a spectrum mask standard.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.8 s.111
• /
• pp.707-712
• /
• 2006

In this paper, dual bias control circuit and PBG(Photonic BandGap) structure have been employed to improve PAE(Power Added Effciency) of the Doherty amplifier on Input power level. The gate and drain bias voltage has been controlled with the envelope of the input RF signal and PBG structure has been employed on the output port of Doherty amplifier. The proposed Doherty amplifier using dual bias controlled circuit and PBG has been improved the average PAE by 8%, $IMD_3$ by -5 dBc. And proposed Doherty amplifier has a high efficiency more than 30% on overall input power level, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.4
• /
• pp.531-538
• /
• 1998

In this paper the system performance degradation resulting from nonlinear transmitter power amplifier which is essential to increase the efficiency is analysed in a CDMA system. The power amplifier is modeled by its AM-AM, AM-PM characteristics. The effects of power amplifier's nonlinearity such as intersymbol interference, phase distonion on the RF system performance were visualized by examining the distorted time domain waveforms, signal vector constellation. And through the investigation of the power spectrum density of the transmitted signal, spectral regrowth or sideband regrowth which is result from amplitude distortion can be seen. All these characteristics result in BER performance degradation due to other user interferences and intersymbol interference. The analysis technique described here applies not only to power amplifier but also to any other nonlinear components such as mixers and switches. Also the effects of adjacent channel interference and supurious emission can be analysed between different systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.11
• /
• pp.2228-2237
• /
• 1994

This paper describes the development of a Ku-band ($12.25GHz\sim12.75GHz$) SSPA intended as a replacement for TWTAs used in communication satelite transponder. The power stage of the amplifier consists of tow intrmally matched 8W FET divices combined using the branch-line coupler. To operate this stage, the drive stage has been designed with intermally matched 2W, 4W, 8W FET and two medium power FETs. The entire amplifier is made up by a aluminum chassis housing both the RF circuit and the bias circuitry. A regrlator/sequencing circuitry is used for FET biasing. The amplifier results implemented in this way show $41\pm0.3dB$ small-signal gain, 15W saturation power, a typical two tone $IM_3=-21.5dBc$ with single carrier backed off 5dB from saturation, $2^*/dBmax$ AM/PM conversion, and $3.47\pm0.25nsec$ group delay.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.218-222
• /
• 2008

RF power amplifier requires linearization in order to reduce adjacent channel interference. And most of the existing linearization algorithms assume that a PA has memory-less nonlinearity. But for the wider bandwidth signal, the memory effect of PA cannot be ignored. This paper investigates digital pre-distortion by use of a memory polynomial model which compensates for amplifier nonlinearity and memory effect. The look-up table based implementation scheme is used to reduce the computational complexity of the pre-distortion block. The linearization performance is demonstrated on wideband CDMA signal and class AB high power amplifier.

• Journal of IKEEE
• /
• v.27 no.1
• /
• pp.53-58
• /
• 2023

In this paper, a Radio Frequency (RF) transformer (TF) based on LTCC (Low Temperature Co-fired Ceramic) for the output stage of differential power amplifiers is presented. Instead of using an usual L-C matching circuit, a small-sized transformer was implemented on the LTCC board and the results were verified through simulation. For reduced size and better performance, a TF using more metal layers was implemented and compared with the existing TF through simulation. As a result of comparison, the proposed TF has an area reduced by 55% and a coupling coefficient increased by 25%, and insertion loss improvement of about 0.4dB at 5GHz was confirmed.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.91-96
• /
• 2005

In this paper, describes the design and performance of a 1.5 kW solid-state pulsed power amplifier, operating over 2.7-2.9 GHz at a duty of 10% and with a pulse width of 100 us for radar application. The solid-state pulsed power amplifier configures a series of 8-stage cascaded power amplifier with different RF output power levels. Low loss Wilkinson combiners are used to combine output powers of six 300W high power solid state modules. Tests show peak output power of 1.61 kW, corresponding to PAE of 26.2% over 2.7-2.9 GHz with pulse width of 100 us and a PRF of 1 kHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.8 s.99
• /
• pp.777-782
• /
• 2005

In this paper, adaptive bias circuit and PBG structure have been employed to suppress IMD(Inter-Modulation Distortion) and improve PAE(Power Added Efficiency) of the Doherty amplifier. Gate bias voltage has been controlled with the envelope of the input RF signal and PBG structure has been employed on the output port of Doherty amplifier. The proposed power amplifier using adaptive bias circuit and PBG has been improved the $IMD_3$ by 7.5 dBc, and the average PAR by $12\%$, respectively.