• 제목/요약/키워드: RF Module

검색결과 480건 처리시간 0.025초

WCDMA 디지털 광 중계기용 Up-converter 설계 및 제작 (Design and Implementation of Up-converter for WCDMA Digital Optic Repeater)

  • 최영선;강원구;장인봉
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2003년도 춘계종합학술대회
    • /
    • pp.586-589
    • /
    • 2003
  • Repeater is developed. Based on the systems The up-converter of the WCDMA Digital Optic pecifications, the structure of the up-converter is accomplished and its block diagram is drawn. The up-converter is implemented according to these block diagrams. Subsequently the low pass filter, the automatic level controlled attenuator, the frequency synthesizer and other components for the up-converter are designed and implemented, and a main board to integrate these modules is also manufactured. To reduce the noise floor of system and suppress the RF spurious noise, a PCB layout is performed carefully. For each module consisting of the up-converter and the entire system, the performance tests are accomplished to check the performance about the specifications.

  • PDF

댁내 전력정보표시장치를 위한 지그비 기반의 송수신 모듈 설계 및 구현 (The Design and Implementation of ZigBee-based Wireless Module for In-Home Display)

  • 권준수;이준희;조성훈
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2011년도 제42회 하계학술대회
    • /
    • pp.2011-2012
    • /
    • 2011
  • 본 논문은 댁내 전력정보표시장치의 무선 통신을 위한 지그비 모듈의 설계 및 구현에 관한 기술이다. 제작된 지그비 모듈은 크게 전원부, MCU부, 통신 인터페이스부, 안테나 및 RF 매칭회로 등으로 구성되며, MCU로는 32비트 ARM$^{(R)}$ Cortex$^{TM}$-M3 프로세서 기반의 EM357 모듈을 사용하였다. 또한, 댁내 전력정보표시장치가 네트워크상에서 코디네이터 또는 노드 역할을 수행하는 상황을 모두 고려하여 RS-485 통신 인터페이스를 추가 구성하였다. 데이터 송수신 성능 시험 결과 주택 내에서는 5%이하의 PER을 보이며, LOS 상에서 최대 400m까지 통신이 가능함을 확인하였다.

  • PDF

방패연을 이용한 저비용 비행시험장치 개발 (Development of Low Cost Flight Test Equipment by Using Bang-pai Kite)

  • 박종서;김봉균;이상철
    • 한국항공운항학회지
    • /
    • 제25권3호
    • /
    • pp.68-73
    • /
    • 2017
  • In this study, we design a low-cost test equipment for real-time image observation and transmission/reception distance test using 1m by 1.5m bang-pai kite. The image observation is made by using two servo motors to enable the camera to control the two axis attitude. The image observation equipment is hung on the string of a kite and the test is performed to observe the real time image. The transmission and reception distance test of the wireless RF transceiver module is conducted on the ground and in the air.

USPCS 대역 FEM 부착 안테나 설계 (A Design of Attaching the Antenna to USPCS Band FEM)

  • 강성원;천창율;김준규
    • 전기학회논문지
    • /
    • 제56권4호
    • /
    • pp.768-772
    • /
    • 2007
  • Integration of RF front end module(FEM) into the antenna has been investigated in USPCS band (1.88GHz-1.99GHz). The FEM consists of input filter, power amplifier, coupler, power detector, bias switch and duplexer. The antenna was designed in planar inverted F antenna(PIFA) structure to implement it inside the handset. In order to avoid strong coupling between the antenna and FEM, a shielding ground layer was placed between them. The antenna size is 19mm by 10mm by 6mm under which FEM whose size is 8mm by 5mm by 1.5m locates. The antenna impedance was selected to match to FEM having better efficiency rather than gain since FEM has enough gain whose system spec is minimum of 20dB. The antenna patterns are shown with and without FEM.

해양 센서네트워크를 위한 초음파 수중통신모듈 설계 및 구현 (Design and Implementation of Ultrasonic Underwater Communication Module for Ocean Sensor Network)

  • 구준형;남흥우;안순신
    • 한국정보과학회:학술대회논문집
    • /
    • 한국정보과학회 2007년도 한국컴퓨터종합학술대회논문집 Vol.34 No.1 (D)
    • /
    • pp.153-156
    • /
    • 2007
  • 최근 대두되고 있는 무선 센서네트워크는 지상뿐만 아니라 해양에서도 필요성이 점차 커지고 있다. 해양에서의 무선통신을 하기 위해서는 지상에서 사용하는 RF와 같이 높은 주파수를 사용할 수 없기 때문에 낮은 주파수 대역을 사용하여야 한다. 따라서 본 논문에서는 낮은 주파수 대역을 사용하는 초음파를 센서노드에 장착하고 이들 센서 노드들의 통신 수행을 위하여 수중통신모듈을 설계 및 구현하였다. 그리고 실험을 통하여 텍스트 기반의 통신이 성공하였음을 확인할 수 있었다. 본 논문에서 구현된 수중통신 모듈은 추후 해양 센서네트워크 서비스를 위한 해양 센서노드 제작에 기반이 될 것이다.

  • PDF

LNB 수신단의 LNA 설계에 관한 연구 (A Ku-band LNA for LNB module)

  • 곽용수;김형석
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 한국정보통신설비학회 2004년도 하계학술대회
    • /
    • pp.369-372
    • /
    • 2004
  • In this paper, a low noise amplifier (LNA) in receiver of Low Noise Block Down Converter (LNB) for direct broadcasting service (DBS) is implemented by using GaAs HEMT The LNA is designed for operation between 10.7GHz-12.7GHz. The LNA consists of input, output matching circuits, DC-blocks and RF-chokes. The result of simulation of the LNA shows that a noise figure is less than 1.4dB and a gain is gloater than 9.2dB in the bandwidth of 10.7 to 12.7GHz with good flatness of 0. ldB

  • PDF

생체신호 무선 송수신을 위한 소형,저전력 통신시스템 개발 (Low-power wireless communication System for Biosignal transmission)

  • 이강휘;이정환;김경섭;김동준
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
    • /
    • pp.370-372
    • /
    • 2005
  • Inconveniences which might arise in transmitting measured biological data based on cable protocols generally are recognized critical points in tele-monitoring environment and also restrict the mobility of the user. a. Especially, activity monitoring which is importantly recognized as a core parameter in ubiquitous healthcare arena and weight management, pervasive and wireless measuring technology is most needed. In this paper, we would like to suggest lower power, miniaturized communication system in order to solve the above problems. The suggested system is powered by small coin-size battery. Also, The suggested system is compared with a blue-tooth module which is generally available in the commercial market. Even though, the suggested system didn't have higher transmission rate, its low power consumption make the suggested system would be feasible in ubiquitous monitoring of biological signals in ubiquitous healthcare arena.

  • PDF

Design of a Module for Oscillation Detection in an Integrated PCS and W-CDMA Receiver

  • Park Joung-Geun;Lee Jong-Chul
    • 한국ITS학회 논문지
    • /
    • 제4권1호
    • /
    • pp.73-79
    • /
    • 2005
  • In this paper, a circuit for detecting a fine oscillation in an integrated PCS and W-CDMA receiver is presented. The advantages for this design are small size and flexible compatibility for system operation compared with the conventional method. The fine oscillation level can be detected by dB unit through selecting the receiver mode as PCS of 1.8 GHz range or W CDMA of 1.9 GHz range by a RF switch and monitoring the corresponding frequency band. Also, the circuit is designed to be flexible for other communication systems with the consideration of the required dynamic range of 75 dB.

  • PDF

Vertical Integration of MM-wave MMIC's and MEMS Antennas

  • Kwon, Young-Woo;Kim, Yong-Kweon;Lee, Sang-Hyo;Kim, Jung-Mu
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제6권3호
    • /
    • pp.169-174
    • /
    • 2006
  • In this work, we demonstrate a novel compact mechanical beam steering transmitter based on a direct vertical integration of a 2-D MEMS-based mechanical beam steering antenna with a VCO on a single silicon platform. By eliminating the long feed lines and waveguide metal blocks, the radiation pattern has been improved vastly, resulting in an almost ideal pattern at every scan angle. The losses incurred by the feed lines and phase shifters are also eliminated, which allows the transmitter to be implemented using only a single VCO. The system complexity has been greatly reduced with a total module size of only 1.5 cm ${\times}$ 1.5 cm ${\times}$ 0.4 cm. This work demonstrates that RF MEMS can be a key enabling technology for high-level integration.

Dual-Polarized Small Base Station Antenna Integrated RF Module Applicable to Various Cell Environments for Next-Generation Mobile Communication Service

  • Lee, Jung-Nam;Lee, Yuro;Park, Bong-Hyuk;Kim, Tae-Joong
    • ETRI Journal
    • /
    • 제39권3호
    • /
    • pp.383-389
    • /
    • 2017
  • A small dual-polarized base station antenna with a simple isolation patch is presented. A high isolation is achieved when using a shorted metallic isolation patch. The experimental results indicate that the measured impedance bandwidth of the proposed antenna is 1.72 GHz to 1.89 GHz for small cell systems and that the isolation is more than 30 dB. The proposed antenna exhibits good radiation patterns with a peak gain of 8 dBi.