• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.6
• /
• pp.665-670
• /
• 2015

In this paper, We proposed a broadband RF amplifier for Microwave band receiver. We also proposed a broadband RF amplifier, designed by using EM simulation for reliable amplification of the received signal. Connected to a source terminal to via, it minimizes those which are the active elements of source-side oscillation as the operating element in an ideal GND, and a constant gain characteristic in a broadband. The goal of this was to obtain stable amplification characteristics. For implementing this architecture, we designed the broadband(500 MHz ~ 7 GHz) RF amplifier by using commercial GaAs FET, which operate on 720 MHz, 4,595 MHz, and 6,035 MHz by impedance matching. The voltage gain is 10.635 dB ~ 14.407 dB(737.5 MHz ~ 6.0575 GHz), P1dB is 20 dBc of band(1st harmonic/2nd harmonic).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.470-473
• /
• 2018

Using High-order Modulation in wideband system is sensitive to change of wireless channel environment as well as changes in ripple characteristics that can occur when baseband signals pass through RF equipment. Therefore, it is necessary to design and RF tuning that minimizes ripple characteristics change, which is difficult to implement systematically and takes a long time. In this paper, we analyze the fixed ripple characteristics of the baseband signal distored through the RF transmitting and receiving equipment. And the function of compensating the compensation filter by the modem receiver is implemented in 256 TCM. Also, it is confirmed that SNR and received sensitivity are improved by applying a digital compensation filter in a channel with poor RF equipment ripple characteristics.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.183-183
• /
• 2011

TTFT(Transparent TFT)의 유전체로 사용되는 절연층으로 사용이 기대되는 yttrium oxide를 ITO 위에 RF magnetron sputtering법으로 상온 증착하고 구조적 특성을 분석하고 조성 및 표면 상태를 확인하였으며 유전 특성을 분석하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.10a
• /
• pp.136-137
• /
• 2009

RF 마그네트론 스퍼터링 방법을 이용하여 증착 power density에 따른 AlN 박막의 배향성과 표면 거칠기 그리고 열전도도 특성의 변화를 조사하였다. 특히 power density가 1.79 W/$cm^3$일 때 가장 우수한 배향성을 얻을 수 있었다. 이러한 배향성과 연관시켜 박막의 미세구조, 표면거칠기, 유전율 등을 분석하였으며, 이러한 특성이 열전도도에 미치는 영향에 대하여 연구하였다.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.2
• /
• pp.22-32
• /
• 2002

MEMS(Micro-Electro-Mechanical Systems)는 전기적인 구성요소와 기계적인 구성요소를 작게 조합하여 구성한 소자나 시스템을 말한다. RF(Radio Frequency) MEMS는 MEMS를 이용한 RF 소자나 시스템을 의미하며, 본 고에서는 RF 소자에 대하여 논의하고자 한다. MEMS는 RF 소자의 성능, 기능, 집적화 등을 높여 주고, 크기, 가격, 부피, 전력 소모 등을 낮추어 주므로 소자 개발에 대한 연구는 매우 다양하지만, 본 고에서는 움직이는 소자 중에서 가장 많이 연구되고 있는 mechanical RF switch에 대하여 중점적으로 다루고자 한다. 이에 대한 연구 동향, 특성, 응용 분야 등을 살펴보고, 상품으로서의 가치를 인정 받기 위하여 고려해야 할 점들을 논의 하겠다.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.08a
• /
• pp.53-56
• /
• 2000

본 논문에서는 ISM 대역에서 동작하는 상용화된 RF 모듈을 사용하여 근거리 통신용 송수신 시스템을 구현하고 그 특성을 측정하였다. 기저 대역 데이터를 발생시켜 RF 모듈에 연결하여 전송하고, 수신측에서는 RF 모듈에서 복조된 데이터를 오실로스코우프를 사용하여 확인하였다. 본 실험에서 사용한 RF 모듈은 424MHz부터 429MHz까지의 영역에서 동작하며, FM 방식을 사용한다. 본 대학의 산학협동관 건물내에서 측정한 결과 거리에 따른 신호 감쇠와 신호 수신 감도를 파악할 수 있었으며, 이를 이용하여 건물 내에서의 근거리 통신에 적용할 수 있음을 확인하였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.6 s.348
• /
• pp.46-52
• /
• 2006

We report on a high performance 94 GHz MMIC resistive mixer using 70-nm metamorphic high electron mobility transistor (MHEMT) and micro-machined W-band ring coupler. A novel 3-dimensional structure of resistive mixer was proposed in this work, and the ring coupler with the surface micro-machined dielectric-supported air-gap microstrip line (DAMLs) structure was used for high LO-RF isolation. The fabricated mixer showed an excellent LO-RF isolation of -29.3 dB and a low conversion loss of 8.9 dB at 94 GHz. To our knowledge, compared to previously reported W-band mixers, the proposed MHEMT-based resistive mixer using micro-machined ring coupler has shown superior LO-RF isolation as well as similar conversion loss.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.2
• /
• pp.50-54
• /
• 2015

In this paper, we report on a high performance 94 GHz MMIC mixer module using 0.1-um metamorphic high electron mobility transistors (MHEMTs). A modified resistive mixer with a RF amplifier was proposed in this work for low conversion loss and high LO-RF isolation. The MMIC mixer module was fabricated using a MMIC chip and CPW-waveguide transitions. The fabricated mixer chip and module showed a low conversion loss of 6.3 dB and 9.5 dB, and LO-RF isolations of 24.8 and 30.4 dB at 94 GHz, respectively. This results are superior to those of previously W-band (75-110 GHz) MMIC mixers.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.11b
• /
• pp.675-680
• /
• 1996

필라멘트 직류 가열 방식에 의한 DC 플라즈마, Capacitive RF 플라즈마, 그리고 DC＋RF 혼성 플라즈마를 발생시켜서, 삼중탐침과 단일탐침으로 측정비교하여 다음과 같은 결과를 얻었다. 또한 두 개의 온도분포가 존재할 때 단일 탐침과 삼중탐침을 비교하여 삼중탐침이 energetic electron 포집함을 알 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.3
• /
• pp.302-311
• /
• 2014

In this work, a FTTL (fishbone-type transmission line) structure was fabricated on PES (polyether sulfone) for a realization of transparent flexible wireless communication device, and its RF characteristics were investigated. According to the results, the FTTL on PES showed a short wavelength characteristic compared with conventional coplanar waveguide. Concretely, the wavelength of the FTTL was 2.23 mm at 50 GHz, which was 56.6 % of the conventional coplanar waveguide. According to the bandwidth extraction result, the passband of the FTTL on PES was 608 GHz. Unlike conventional periodic structures, the characteristic impedance of the FTTL on PES showed a very low frequency dependency, which means that the FTTL on PES can be used for application to transmission line and distributed passive components with a broadband operation frequency.