• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.2
• /
• pp.107-112
• /
• 2013

In this paper, we discuss a 3-dimensional localization sensor node using EM waves (Electromagnetic waves) with RSSI (Received Signal Strength Indicator). Generally EM waves cannot be used in underwater environment, because the signal is highly attenuated by the water medium according to the distance. Although the signal quickly reduces in underwater, the reducing tendency is very clear and uniform. Hence EM waves have possibility as underwater distance sensors. The authors have verified the possibility by theory and several experiments, and developed calibration methods in case of linear and planer environment. For 3-dimensional localization in underwater, it must be known antenna's radiation pattern property in electric plane(called E-plane). In this paper, we proceed experiments to verify attenuation tendency with z axis movement, PLF (Polarization Loss Factor) and ILF (Inclination Loss Factor) with its theoretical approach.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.228-228
• /
• 2009

In stator windings of a 6.6kV rotating machine, internal discharge, corona discharge, and surface discharge are mainly caused by internal voids and insulation degradation. In the case of the discharge spark and electromagnetic pulse generated from a discharge source, we can detect it using various RF resonators like an EM sensor. In order to detect these types of electromagnetic sources, we designed and fabricated a planar patch sensor using a CST-MWS simulation, and PD signals from artificial defected stator windings were also measured by the sensor proposed in this study. Furthermore, In the results of the experiment, it showed similar performance to the HFCT sensor.

• Proceedings of the KIEE Conference
• /
• 2007.11c
• /
• pp.77-82
• /
• 2007

In this paper, we described a design and implementation of a sensor node for environmental monitoring. The main focus of design for sensor nodes is to isolate MCU for treating sensors from the RF module for considering various communication environment. The second is to make the interface between MCU and varity of sensor. In addition, we choose a narrow band communication module, cc1020, for the admittance of Korea government comminication law. We also use a uC/OS-II as an operating system which is famous for 8bit MCUs. We showed that the communication performance is sufficient to use the communication module in a out-door environment through several experiments in that it is possible to transmit between loom distance through experiments in a mountain.

• Journal of Korea Multimedia Society
• /
• v.20 no.12
• /
• pp.1940-1950
• /
• 2017

The security threat types in underwater communication networks environment are almost the same as the terrestrial, but the security of mechanisms the terrestrial RF-based networks environment can not be directly applied due to not only the limited resources of each node but also unsafe channel such as low propagation delay, high bit error rate etc. Nevertheless there has not been much research on the security of underwater acoustic communication networks. Therefore, in this paper analyzes the differences between the terrestrial communication networks and underwater acoustic communication networks, and identifies issues that are the starting points of underwater communication networks security research.

• The Journal of Korea Robotics Society
• /
• v.2 no.1
• /
• pp.71-79
• /
• 2007

We propose and develop Home Security robot system based on Sensor Network (HSSN) configured by sensor nodes including radio frequency (RF), ultrasonic, temperature, light and sound sensors. Our system can acknowledge security alarm events that are acquired by sensor nodes and relayed in the hop-by-hop transmission way. There are sensor network, Home Security Mobile Robot (HSMR) and Home Server(HS) in this system. In the experimental results of this system, we presented that our system has more enhanced performance of response to emergency context and more speedy and accurate path planning to target position for arriving an alarm zone with obstacle avoidance and acquiring the context-aware information.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.101-104
• /
• 1998

A new planar-type micro gas sensor was designed and fabricated on silicon substrate and the operating characteristics of the sensor were investigated. The thin sensitive film of the sensor was fabricated by spin-coating of the SnO$_2$ sol solution which was synthesized by hydrothermal method. The spin-coating method for preparation of sensing layer was adopted to improve the long-term stability of the fabricated sensing film instead of physical methods such as rf sputtering and thermal evaporation. The fabricated microsensor showed a fairly good sensing performance for CO gas in air at 250$^{\circ}C$ The sensitivity(S=Ra/Rg) was shown to be about 5 to 2000ppm CO with heating power of 50mW.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.826-829
• /
• 2002

$MoO_3$ thin films were deposited on electrode and heater screen-printed alumina substrates in en atmosphere by RF reactive sputtering. The deposition was performed at $300^{\circ}C$ with 350W of a forward power in an $Ar-O_2$ atmosphere. The working pressure was maintained at $3{\times}10^{-2}$mtorr and all deposited films were annealed at $500^{\circ}C$ for 5hours. The surface morphology of films was observed by using a SEM and crystalline phases were analyzed by XRD. The sensing properties were investigated in term of gas concentration under exposure of reducing gases such as $H_2$, $NH_3$ and CO.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.9
• /
• pp.443-448
• /
• 2006

Non-contacting capacitive sensor based on Thompson-Lampard theorem have been fabricated and characterized for measuring of 때 order displacements. To overcome disadvantages of the existed capacitive sensors of parallel plate type with 2-electrodes and 3-electrodes, the developed new sensor was designed to have 4-electrodes with a constant gap of 0.2mm between the electrodes. Two of the electrodes were used as a high potential electrode and a low one, the other two electrodes were used as guard electrodes. These electrodes were made from copper using RF sputtering system on a sapphire plate with diameter 17 mm and thickness 0.7 mm. This sensor can be used for measuring the distance not only between the sensor and metallic target connected to ground potential but also non-metallic target without ground connection.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2649-2651
• /
• 2004

본 논문에서는 다중객체 인식 시스템과 같은 저용량 데이터전송의 저전력 무선센서네트워크 분야에 적용 가능한 새로운 펄스 방식의 저용량 UWB 통신 시스템을 제안하고 이를 설계 및 구현한다. 특히, 펄스방식의 저전력 UWB 시스템을 구현하기 위해서 전형적인 통신시스템의 수신기 구조인 RF단의 믹서, 상관기와 A/D 변환기를 없애고 최대한 단순화된 구조의 무선 비동기방식의 초광대역 송수신기를 설계한다. 설계된 WAU(Wireless Asynchronous Ultra-Wide band)시스템은 홈내 또는 강의실과 같은 곳에서 1:N HD(Half Duplex) 방식으로 저전력 무선 CANVAS 전송이 가능토록 실제 구현되었다. 구현된 WAU 시스템은 P-to-P(Peer-to-Peer) LOS(Line of Sight) 채널상태의 전송거리 10 m 에서 안정적으로 최대 115kbps 급의 전송속도가 지원 가능함을 측정하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.282-282
• /
• 2008

Quasi-ordered arrays of hollow $SnO_2$ hemispheres were prepared by utilizing the colloidal templating route and RF-sputtering methods. Hollow $SnO_2$ hemispheres with shell thickness of 20nm exhibited an uniform continuity and open porosity, resulting in high gas sensitivity due to enhanced surface area as well as reduced interfacial effects. Multilayered hollow $SnO_2$ hemispheres and hollow $SnO_2$ hemispheres with controlled wall thickness were fabricated by controlling processing steps.