• Journal of the Institute of Convergence Signal Processing
• /
• v.6 no.3
• /
• pp.127-133
• /
• 2005

In this paper, we propose speech interlace using VoiceXML in home network system Existing home network uses Bluetooth, IrDA, wireless LAN and Home RF but these was able to use a long distance such as outdoors or these was difficult to using method. The proposing VoiceXML speech interlace is supported with home network services more than other interface technology in a long distance also speech interlace controls home server using a wire and a wireless phone and is informed of problems to direct calling for user through VoiceXML server. In this paper, such speech interlace is able to use the aspect of home network and supports to practical remote gauge examination, remote control services. And on the basic of that, we evaluate efficiency of purposed method.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.10
• /
• pp.19-26
• /
• 1998

In this paper, we studied the design and implementation of fading compensation systems at aspects of narrowband mobile communication using TTIB SSB. The mobile radio channel with multipath fading places fundamental limitations on the performance of wireless communication systems. The multipath fading is compensated using pilot tone in TTIB SSB. The TTIB transceiver was implemented using the prevailing digital signal processing (DSP) techniques and compensation for the multipath fading was incorporated in the receiver in the form of DSP algorithm. In order to evaluate fading compensation performance in TTIB transceiver, we first used computer simulation. In the simulation results, we found that the TTIB transceiver could compensate for the multipath fading as expected. Second, we carried out some experiments on TTIB transceiver implementation with DSP boards and later with hardwares including RF circuits with center frequency of 145MHz. Through these experiments, we found that fading compensation performance in TTIB transceiver was almost as good as that obtained from simulation.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.9
• /
• pp.37-43
• /
• 2010

An Interference Cancellation Wireless Repeater transmitts directly amplified the RF signal input to extend the coverage of the base station. Such a repeater inevitably suffers from the feedback interferences due to the environment and the adaptive Interference Cancelling System(ICS) is necessary. In this paper, the Variable Stepsize Complex Sign -Sign(VSCSS) LMS algorithm for ICS is presented. The algorithm can be implemented without multiplication/division arithmetic operation so that the required logic resources can be dramatically reduced in FPGA implementation. The performance of the proposed algorithm was analyzed in comparison with CSS-LMS algorithm and the learning curves obtained from simulation showed an excellent agreement with the theorical prediction. The simulation result with ICS in fading feedback channel environment showed the performance of the proposed algorithm is competible with NLMS algorithm.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.8
• /
• pp.107-115
• /
• 2010

RFID (Radio Frequency IDentification) technology, automatic identification and data capture technologies in ubiquitous computing is an essential skill. Low-cost Radio Frequency Identification tags using memory and no physical contact due to the ease of use and maintenance of excellence are going to use expanded. However, it is possible to the illegal acquisition of the information between RFID tags and readers because RFID uses the RF signal, and the obtained information can be used for the purpose of location tracking and invasion of privacy. In this paper, we proposed the security scheme to protect against the illegal user location tracking and invasion of privacy. The security scheme proposed in this paper, using Gray Code and reduced the capacity of the calculation of the actual tags, However, it is impossible for the malicious attacker to track information because tag information transmitted from the reader is not fixed. Therefore, even if the tags information is obtained by a malicious way, our scheme provides more simple and safe user privacy than any other protection methods to protect user privacy, because not actual information but encrypted information is becoming exposed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.4
• /
• pp.27-37
• /
• 2001

The design, fabrication, and an experimental implementation of the strip patch antenna coupled with a H-shaped aperture arc presented in this paper. The proposed antenna has the wide bandwidth, high gain, and low cross-polarization levels. We measured the VSWR, smith chart impedance characteristic, co/cross polarization pattern, gain, and so on. The measured bandwidth of this antenna is 47.1 %. To reduce the back lobe and increase the gain, when the reflector is used, cross polarization level is below -18.2dB at E-plane and below 25.7 dB at H -plane. The maximum gain at 2.05 GHz is also 10.4 dBi and the 3 dB gain bandwidth with center frequency at 2.17 GHz is 24 %, which is the wide bandwidth. This antenna can find applications in mobile communication, wireless LAN, RF communication system, and so on.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.6B
• /
• pp.642-649
• /
• 2011

In this paper, we present the analysis of the characteristics of advanced mobile communication base station with multi-band about power loss, power efficiency and carbon reduction considering cable power loss. The advanced mobile base station system is installed on the outdoor for Antenna and RF part, and then the power loss is reduced because the fiber optic cable is used between RF part and baseband part. If the cable power loss is reduced by 5 dB replacing an entire the advanced base station systems, annual power consumption is reduced total 49,038 MWh in the CDMA 20W, WCDMA 30W, WiBro 10W systems. Furthermore the advanced base station system of annual $CO_2$ emission is 20,832 $tCO_2$ compare to 65,878 $tCO_2$. Therefore the advanced base system is confirmed considering green IT technology for the advanced mobile communication base station.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.2
• /
• pp.339-346
• /
• 2011

In the existing RF communication based WPAN environment, a lowering of battery span and interference problem among sensors occur because the value of output is set and transmitted steadily when the system on sensor is initialized. Therefore, this paper proposes a framework and a transmit method with low power which decreases the electricity consumption by properly controling transmit power of opponent by received signal strength indicator(RSSI) of each sensor. The system proposes a power-lowering method by controling transmit power properly by the transmit intensity of the connected sensor after being affected by the transmit intensity of surrounded sensor. The framework that is proposed in this paper includes data transmit module, transmit power manager module, transmit power searching module, signal transmit module, and signal receiving module.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.5
• /
• pp.106-121
• /
• 2008

In this paper, we proposed and designed the protocol for energy efficiency and the center of data aiming at the design of a Multi Location Awareness System that recognizes a shadow site in parking and tunnel, which stands on the basis of CSS(Chirp Spread Spectrum) method using ISM Band of IEEE 802.15.4a that aware close location with wireless RF only. As a result of the protocol measurement, it displays the observation errors of less than 15cm, the data error rate of less than 5%, and can implement the Multi Location Awareness System with maximum length of life for 13.5 days using battery of 3V(1500 mAh).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.11
• /
• pp.2119-2124
• /
• 2008

An information-oriented basis in today's society has been changing fast, and the desire for connectivity has caused an exponential growth in wireless communication and sensor network. Sensor networks using RFID, in particular, have led this trend due to the increasing exchange of data in Ubiquitous such as the home RF, access control system, U-Healthcare, and Logistics information Systems. Also, the RFID when it applies a technique, is able to raise the stability of shipping as controling the mobile course and an entrance and exit of the crews an well as previously preventing an accident from shipping. In this paper, we designed and implemented personnel control system using UHF-RFID in vessels which shows through host PC reading and writing tag.

• Journal of Practical Engineering Education
• /
• v.15 no.3
• /
• pp.549-555
• /
• 2023

The representative technology of the WWAN wireless communication network used in the Internet of Things is LoRa communication technology, and LoRa communication uses the ISM band. The 920 MHz (920.9 MHz~923.3 MHz) band frequency, which is used as a domestic LoRa frequency, had a problem in performing LoRa network practice in the curriculum using a commercially available LoRa modules that have been used in Europe and the United States because of different frequency band, but a RYLR896 LoRa module was developed that allowed RF frequency to be programmed. With this module, this paper confirmed that the frequency can be set at a specified frequency in Korea using AT commands. In addition, using these RYLR896 LoRa modules, a LoRa network consisting of end nodes and gateways was constructed and practiced to confirm that development equipment capable of practicing the RYLR896 LoRa module and IoT was operating normally.