• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1490-1491
• /
• 2006

포항가속기연구소 선형${\mu}$가속기의 대전력 RF부품의 시험과 RF증폭을 위해 사용되는 클라이스트론 튜브의 시험용 전원으로 펄스전원인 모듈레이터를 사용하고 있다. 고전적인 방식의 교류전압을 변환하여 직류로 만들고 이 전원을 L-C공진충전에 의해 펄스를 생성하는 펄스 커패시터에 약 2배의 직류전원으로 충전하는 기법을 사용하고 있다. 이들 전원은 저주파의 대용량 변압기를 사용하여 직류로 변환하는 부품들의 부피가 크다. 새로운 충전기법을 적용한 펄스전원의 경우는 고주파 인버터 전원을 채택하여 그 부피를 줄이고 지령충전에 의해 펄스를 생성하는 싸이라트론의 애노드에 고전압이 머무는 시간을 줄임으로서 자발방전이나 고전압 아크에 의한 오동작을 최소로 할 수 있다는 장점이 있다. 본 논문에서는 고주파 전원 방식을 채용한 펄스 모듈레이터의 제어방법의 개선과 부피를 줄여 운전의 효율성을 높인 내용으로 발표하고자 한다.

• Aerospace Engineering and Technology
• /
• v.11 no.2
• /
• pp.1-11
• /
• 2012

This paper describes the transmit/receive(T/R) module for the space based X-band active phased array radar. T/R module is the integrated module which is assembled by the transmitting and receiving RF semiconductor devices to enable the electronically beam steering of the phased array antenna and the key component of the SAR payload. T/R module can selectively receive the polarization signals by the switch according to the established technology but now the technological trend of the T/R module is to receive the horizontal and vertical polarization signal simultaneously. Therefore the research and development of the dual polarization receiving channel T/R module is actively in progress. In this study, as the prior research for the next generation SAR payload, the technological trend of the active phased array radar T/R module and the result of the preliminary design of the dual receiving channel T/R module were described.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.997-1000
• /
• 2006

In this paper, we have used the 900Mha RF band and produced the transmitter-receivers to measure the distance of moving range of a crane. We selected the analog signal of 450Khz middle frequency band of the RF Baseset module, and the property data of phase response is analysed to estimate the range distance. We have earned the good results from the experiment.

• Journal of Advanced Navigation Technology
• /
• v.13 no.4
• /
• pp.503-508
• /
• 2009

In this paper, we have designed the auxiliary input device which based on hand-motion recognition. It is aimed at some individually specified person such as the disabled, rehabilitation patient, and the aged. The gyro sensor is used to recognize the hand-motion in 3D space, and communication bandwidth for transceiver is also set to the 2.4GHz. Prototype board includes a set of modules; Gyro sensor, RF transmitter/receiver, MCU for signal processing and USB connector etc. Some experiments are conducted so as to verify the prototype, and as a result, mouse-based curser motion as well as program control are well operated just same as the design specification.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.1 no.1
• /
• pp.8-19
• /
• 2006

The RF Module which can be adjusted for a digital terrestrial and multi standard(DVB-C, ISDB-T, DVB-H) reception is developed. The Module by single conversion does divide a broadband(45MHz~860MHz) broadcasting channels into three-bands(UHF, VHF_HIGH, VHF_LOW) to satisfy some electrical performances such as image signal rejection, phase noise, IF flatness etc and digital reception specifications such as analog and digital adjacent channel protection, co-channel protection which is important in environment with co-existence both analog and digital broadcasting systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3A
• /
• pp.345-355
• /
• 2006

The RF Module which can be adjusted for a digital terrestrial and multi standard(DVB-C, ISDB-T, DVB-H) reception is developed. The Module by single conversion does divide a broadband($45MHz{\sim}860MHz$) broadcasting channels into three-bands(UHF, VHF_HIGH, VHF_LOW) to satisfy some electrical performances such as image signal rejection, phase noise, IF flatness etc and digital reception specifications such as analog and digital adjacent channel protection, co-channel protection which is important in environment with co-existence both analog and digital broadcasting systems.

• Journal of Advanced Navigation Technology
• /
• v.20 no.6
• /
• pp.556-561
• /
• 2016

This paper describes implementation of a 13.56 MHz, 5 kW RF high power generator for ISM band applications. This RF generator consists of four LDMOS modules of 1.25kW class-AB push-pull power amplifier with drive amplifier and its outputs are combined by using Wilkinson type transmission-line transformers. Its generator has a high efficiency and output power better than linearity. In order to discharge power transistor heats, we used on water cooled copper plate. Also, these have a composite circuit of combiner and low-pass filter and safety circuit to detector over and reflected power. The RF generator has achieved a efficiency of 79 % at 5.33 kW of saturated power level experimentally.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.3
• /
• pp.12-24
• /
• 2001

The key advantage of LTCC(low temperature co-fired ceramics) technology is the ability to integrate passive components such as resistors, capacitors, and inductors. More compact circuits with an increased scale of integration are needed with the development for advanced telecommunication system such as IMT-2000. LTCC technology can be obtained by removing these elements from the substrate surface to inside of ceramic body. And it can miniaturize the wireless phone through integration of planar patch antenna, duplexer, band pass filter, bias line, circuit of impedance matching and RF choke etc. Futhermore, with the multilayer chip process and its outstanding electrical material characteristics, LTCC is predestined for highly-integrated, cost effective wide band applications. This paper focuses on the general description of LTCC MCM technologies and the fabrication of the multilayer VCO module.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.11
• /
• pp.949-958
• /
• 2016

This paper presents the new development result of the multi-band, the multi-mode SDR(Software Defined Radar) platform. The SDR hardware platform is implemented by using the reconfigurable multi-band RF transceiver and antenna modules of S, X, and K-bands, and a programmable signal processing module. The SDR software platform is implemented by using the multi-mode waveform generation of CW, Pulse, FMCW, and LFM Chirp as well as the adaptable algorithm library of signal processing and open API software modules. Through the integrated test of the SDR platform, the operational performance was verified in real-time. Also, through the field-application test, the ground target and air-vehicle drone target were successfully detected and their test results were presented.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.738-740
• /
• 2017

Visible light communication is a communication method using light, and it has advantage of ensuring security in a single space as compared with RF communication. However, in the area outside the visible line of the light, communication disconnection occurs. Therefore, this paper proposes a relay module to overcome the coverage extension and communication disconnection phenomenon of visible light communication. The proposed relay module transmits and receives data of visible light communication by sequentially transmitting data packets including target ID through adjacent visible light module. Through experimentation of data transmission, we confirmed the extension of the transmission range and the data reception in the area outside the line of sight.