• 제목/요약/키워드: RETENTION AREA

검색결과 487건 처리시간 0.032초

활엽수크라프트펄프 및 박테리아 셀룰로오스부터 제조한 종이의 물성 (Mechanical Properties of Papers Prepared from Hardwood KP and Bacterial Cellulose)

  • 조남석;김영신;박종문;민두식;안드레레오노비치
    • 펄프종이기술
    • /
    • 제29권4호
    • /
    • pp.53-63
    • /
    • 1997
  • Most cellulose resources come from the higher plants, but bacteria also synthesize same cellulose as in plants. Many scientists have been widely studied on the bacterial cellulose, the process development, manufacturing, even marketing of cellulose fibers. The bacterial celluloses are very different in its physical and morphological structures. These fibers have many unique properties that are potentially and commercially beneficial. The fine fibers can produce a smooth paper with enchanced its strength property. But there gave been few reports on the mechanical properties of the processing of bacterial cellulose into structural materials. This study were performed to elucidate the mechanical properties of sheets prepared from bacterial cellulose. Also reinforcing effect of bacterial cellulose on the conventional pulp paper as well as surface structures by scanning electron microscopy were discussed. Paper made from bacterial cellulose is 10 times much stronger than ordinary chemical pulp sheet, and the mixing of bacterial cellulose has a remarkable reinforcing effect on the papers. Mechanical strengthes were increased with the increase of bacterial cellulose content in the sheet. This strength increase corresponds to the increasing water retention value and sheet density with the increase of bacterial cellulose content. Scanning electron micrographs were shown that fine microfibrills of bacterial celluloses covered on the surfaces of hardwood pulp fibers, and enhanced sheet strength by its intimate fiber bonding.

  • PDF

Neutral Zone 개념과 Stereographic Record를 이용한 총의치 제작 (Clinical application of neutral zone and stereographic record in complete denture)

  • 이정민;이양진;조리라
    • 구강회복응용과학지
    • /
    • 제17권2호
    • /
    • pp.113-123
    • /
    • 2001
  • The success of complete denture prosthesis is to satisfy three basic requirements for the edentulous patient : maximum comfort, efficiency, and esthetic appearance. This can be achieved only if the dentures are both stable and retentive. When the residual alveolar ridge has resorbed significantly, stability and retention are more dependent on the correct position of the teeth and external surfaces of the denture. The stability and retention of the denture can be improved by locating the denture in the neutral zone and reproducing exact mandibular border movement for balanced occlusion. The neutral zone philosophy is based upon the concept that there exists a specific area where the musculature function will not unseat the denture in the mouth. In here, forces generated by the tongue are neutralized by the forces generated by the lips and cheeks. One of the simplest methods for recording border movements in three dimensions is to make stereographic record of condylar movement. Stereographs are made in the mouth during mandibular movement with intraoral clutches and central bearing point, and used in dictating the condylar movement on the articulator later by generating the condylar paths in doughy acrylic resin. Its procedure is simpler and more convenient than that of Pantograph. In this clinical report, we introduce the concept of neutral zone and stereograph in complete denture fabrication.

  • PDF

치아이상에 관한 연구 (A STUDY OF DENTAL ANOMALIES)

  • 양숙;김재덕
    • 치과방사선
    • /
    • 제23권2호
    • /
    • pp.303-314
    • /
    • 1993
  • The purpose of this study was to find out the prevalence of dental anomalies in 600 normal persons (male:363, female:237) at age 14 to 39 years, through history taking, oral examination, and radiographic observations of subjects. The obtained results were as follows: 1. The prevalences of individual dental anomalies were as follows; Congenitally missing teeth 7%; supernumerary teeth 1.33%; ectopic eruption; 8.50%, transposition;0.33% rotation; 23.67%, microdontia;11.16%(peg lateralis;5.33%, third molar;5.83%), prolonged retention of deciduous teeth;1.33%, crowding 49.83%, and spacing;15.17%. 2. Alterations in numbers of teeth : The most frequently missing teeth were mandibular lateral incisors, followed by mandibular second premolars and maxillary second premolars. In numbers of congenitally missing teeth per person, 52.38% had one missing tooth and 30.95% had two missing teeth. In supernumerary teeth, there was higher rate in male than in female. Most supernumerary teeth were mesiodens of median area in maxilla and the eruption pattern of that teeth generally was unerupted state. 3. In transposition, exchange of position of teeth involved the canine and first premolar. 4. Congenital missing rate of permanent successors in prolonged retention of deciduous teeth was 69.23%. 5. Crowing and spacing had respectively higher rate in mandible and in maxilla.

  • PDF

전기분해법에 의한 해수내의 암모니아성 질소 제거 (Ammonia-nitrogen Removal in Sea Water by Using Electrolysis)

  • 이병헌;이제근;길대수;곽순열
    • 한국양식학회지
    • /
    • 제10권4호
    • /
    • pp.435-438
    • /
    • 1997
  • 전기분해를 이용한 해수의 암모니아성 질소 및 대장균 제거에 효과적이었다. 암모니아의 제거효율은 전류의 세기가 클수록, 반응 시간이 길수록, 극판간격이 좁을수록 증가하였다. 해수내 250/100 m\ell$의 대장균은 모든 실험 조건에서 검출되지 않아, 살균 목적으로 전기분해가 매우 효과적이었다. 암모니아의 제거 효율은 잔류 염소의 농도에 따라 증가하였다. 암모니아의 제거 효율과 잔류 염소와의 관계는 다음과 같다.$NH_4^+-N(%)=4cdotlog[Residual\;chlorine(mg/\ell)+28(r=0.892)$

  • PDF

대구지역 인공열의 시공간적 분포 추정에 관한 연구 (Estimation of the Temporal and Spatial Distribution of Anthropogenic Heat in Daegu)

  • 안지숙;김해동;홍정혜
    • 한국환경과학회지
    • /
    • 제11권10호
    • /
    • pp.1045-1054
    • /
    • 2002
  • Urban atmospheric conditions are usually settled as warmer, drier and dirtier than those of rural counterpart owing to reduction of green space and water space area heat retention in surfaces such as concrete and asphalt, and abundant fuel consumption. The characteristics of urban climate has become generally known as urban heat island. The purpose of this study is to investigate the temporal and spatial distribution of the heat emission from human activity, which is a main factor causing urban heat island. In this study, the anthropogenic heat fluxes emitted from vehicles and constructions are estimated by computational grid mesh which is divided by 1km $\times$ 1km. The anthropogenic heat flux by grid mesh can be applied to a numerical simulation model of the local circulation model. The constructions are classified into 9 energy-consumption types - hospital, hotel, office, department store, commercial store, school, factory, detached house and flat. The vehicles classified into 4 energy-consumption types - car, taxi, truck and bus. The seasonal mean of anthropogenic heat flux around central Daegu exceeded $50 W/m^2$ in winter. The annual mean anthropogenic heat flux exceeded $20 W/m^2$. The values are nearly equivalent to the anthropogenic heat flux in the suburbs of Tokyo, Japan.

공동주택단지 개발에서의 분산식 빗물관리 목표량 설정 - 택지개발사업지구 내 단지를 대상으로 - (Estimation of Proportion to Decentralized Rainwater Management Needed in Apartment Complex Development)

  • 이태구;한영해
    • KIEAE Journal
    • /
    • 제6권3호
    • /
    • pp.27-34
    • /
    • 2006
  • The recent emphasis on ecological urban development has led to the need to maintain a hydrologic cycle in urban areas. As such, this study proposes decentralized rainwater management, a concept of onsite rainwater management that involves the utilization, infiltration, detention, and retention of rainwater. The main objective of this research is to estimate the proportion of decentralized rainwater management that is needed. From the research that was conducted in this study, it was found that the total runoff quantity increases by 10-20% after district lands are developed, when the probable rate of precipitation every 10 years is within this range. Thus, the runoff rate can be reduced by 10~20% of the total runoff quantity through decentralization. On the other hand, in the scale of housing complex development, the total runoff quantity increases by as much as 10~40% due to the changes in the rate of the impervious surface area. If 10-40% of the total runoff quantity was processed through decentralized rainwater management, the rate of infiltration, detention, retention, and runoff in precipitation prior to development could be recovered.

태봉음이 콜린성 신경세포손상 백서의 학습 및 기억에 미치는 영향 (Effects of Taebong-eum on Learning and Memory Function in the Cholinergic Cell Damaged Rat)

  • 박종수;지규용;엄현섭
    • 동의생리병리학회지
    • /
    • 제17권1호
    • /
    • pp.50-56
    • /
    • 2003
  • This research was done to make the effective prescription and cope with various senile dementia. So Sprague-Dawley rats were injected with ibotenate to make a damage on learning and memory functions. At first acquisition test and retention rest were done in the Morris water maze. And to evaluate the effects of the sample drug(TBM) on choline acetyltranferase and acetylcholine esterase, immunoreactive measurement and enzymatic activity measuring were carried out. The ibotenic acid were injected to hippocampus CA1 and CA3 area. The results were as following. TBM improved the learning ability in the acquisition test and memory function in the retention test significantly. And TBM increased the level of ChAT which is synthesizing acetylcholine in CA3 area, and at the same time it increased the level of AChE which is resolving acetylcholine. These results show that T8M improved the cholinergic catabolism and anabolism, and the increment of metabolic activity of cholinergic system. In other words, it contributes to the recovery of damaged learning and memory function by ibotenic acid. So it can be concluded that TBM will be helpful to cholinergic brain damage induced by primary or senile reduction of acetylcholine secretive activity.

Comparison between fiber-reinforced polymers and stainless steel orthodontic retainers

  • Lucchese, Alessandra;Manuelli, Maurizio;Ciuffreda, Claudio;Albertini, Paolo;Gherlone, Enrico;Perillo, Letizia
    • 대한치과교정학회지
    • /
    • 제48권2호
    • /
    • pp.107-112
    • /
    • 2018
  • Objective: The aim of this study was to examine the properties of fiber-reinforced composite and stainless steel twisted retainers for orthodontic retention. Methods: Three different span lengths (5.0, 8.0, and 14.0 mm) of fiber-reinforced composite were investigated. The three fiber-reinforced composite retainer groups were subdivided according to the storage condition (dry and wet), resulting in a total of six groups. Each stainless steel and fiber-reinforced composite group was comprised of six specimens. The three-point bending flexural test was conducted using a universal testing machine. ANOVA was used to assess differences in the maximum load and maximum stress according to the span length, material, and storage condition. Post-hoc comparisons were performed if necessary. Results: The maximum stress and maximum load were significantly (p < 0.001) associated with the span length, material, and storage condition. The significant interaction between the material and span length (p < 0.001) indicated the differential effects of the material for each span length on the maximum stress and maximum load, with the difference between materials being the highest for the maximum span length. Conclusions: Our findings suggest that fiber-reinforced composite retainers may be an effective alternative for orthodontic retention in patients with esthetic concerns or allergy to conventional stainless steel wires.

GROWTH AND FODDER YIELD OF THE Gliricidia sepium PROVENANCES IN FENCE SYSTEM IN DRYLAND FARMING AREA IN BALI, INDONESIA

  • Sukanten, I.W.;Nitis, I.M.;Lana, K.;Uchida, S.;Suama, M.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제8권5호
    • /
    • pp.515-522
    • /
    • 1995
  • The field experiment was carried out to study the growth and fodder yield of the Gliricidia sepium provenances in fence system in dryland farming area in Bali, Indonesia for 24 months. The design of the experiment was a completely randomized block arrangement, consisted of 16 treatments (Gliricidia sepium provenances) and 12 blocks with 10 plants per provenance. Of the 16 gliricidia provenances, six were from Mexico (M), four were from Guatemala (G), and one each was from Colombia (C), Indonesia (I), Nicaragna (N), Panama (P), Costa Rica (R) and Venezuela (V). After 40 weeks establishment the gliricidia were lopped regularly 4 times a year, twice during the four month wet season and twice during the eight month dry season at 150 cm height. There were variations (p < 0.05) in stem elongation from 10 to 121 cm, leaf retained from 48 to 105%, leaf shedding from 53 to 86%, branch number from 4 to 7, fodder yield from 281 to 648 g DW/plant, and wood yield from 53 to 179 g DW/plant; and such variations were affected by the seasons. Retalhuleu provenance of Guatemala (G14), Belen provenance of Nicaragua (N14) and Bukit Bali provenance of Indonesia (I) were ranked first, second and third, respectively, measured in terms of stem elongation, leaf retention, fodder and wood yields during the wet and dry seasons.

BCS-II 공법을 이용한 마을하수도 처리 효율 분석: 안동시를 대상으로 (Analysis of RCSTP Treatment Efficiency using BCS-II Process: Case Study of An-dong City)

  • 임지열;길경익
    • 한국습지학회지
    • /
    • 제16권4호
    • /
    • pp.423-431
    • /
    • 2014
  • 상수원과 같은 수계 수질 보호 및 농촌 지역 개발을 위해 마을하수도 보급이 필요하다. 본 연구에서는 안동 지역 마을하수도(11개소) 유입하수 특성 및 마을하수도에 도입된 처리 공법의 결과를 분석하였다. 안동 지역 마을하수도 유입하수는 도시지역에 비해 고농도의 유기물과 영양염류를 함유하고 있는 것으로 분석되었다. 안동시 마을하수도 공법은 안정적인 처리효율을 보였지만, 영양염류의 경우 유기물에 비해 solid retention time(SRT)와 food to microorganisms (F/M) ratio에 민감한 것으로 나타났다. 또한 안동 지역 마을하수도 공법은 타 공법($A^2/O$, SBR, media)들과 비교하여 전반적으로 높은 처리 효율을 보였으며, 본 공법은 마을하수도에 효과적으로 적용 가능한 공법이라 판단된다.