• 한국자동차공학회논문집
• /
• 제22권5호
• /
• pp.35-43
• /
• 2014

The automobile industry requires technological innovations to reduce fuel consumption with the public interest in environmental conservation in recent years. Thus, the hybrid system is applied not only to passenger cars but also commercial vehicles. The purpose of this paper is to develop engine ECU_ILS to develop commercial hybrid vehicles. In order to develop the engine and vehicle, the dynamometer and exhaust gas analyzer is needed. However, a lot of time and cost are required. In contrast, the model-based development environment that can be applied to a variety of test conditions can reduce development time. Therefore, a HILS system environment that can consider the behavior of actual vehicles for evaluation of the control logic, fuel consumption and exhaust gas is required. This engine ECU_ILS system was developed in this study, can analyze parameter such as the fuel injection rate, fuel injection time, fuel consumption and exhaust gas like the actual vehicle test using map data. Also, this system is expected to be able to analyze the characteristic of vehicle behavior and the development of peripheral device in relation to engine and vehicles. This HILS system can be used to develop control strategies of commercial hybrid vehicle systems in the future.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.III
• /
• pp.662-669
• /
• 2000

Based on the viscous flow characteristics of gas through capillary tube, a simple and low cost system was developed for controlling gas concentration for use in C.A experiments. The gas flow rate through capillary tube had a linear relationship with pressure, $(length)^{-1}$ and $(radius)^4$ of capillary tube, which agreed well with Hagen-Poiseuille's law. The developed system could control the gas concentration in storage chamber within ${\pm}0.3%$ deviation compared to the preset concentration. The required time for producing target gas concentration in storage chamber was exactly predicted by the model used in this study, and it required much longer time than the calculated time which divided the volume of chamber by flow rate. Therefore, for producing target gas concentration as quickly as possible, it needs to supply higher flow rate of gas during the initial stage of experiment when gas concentration in storage chamber has not reached at target value. It appeared that the developed system was very useful for C.A experiments. Because one could decide a desired flow rate by the prediction model, control flow rate freely and easily by changing pressure in the pressure-regulating chamber and the accuracy was high.

• Journal of Biosystems Engineering
• /
• 제24권4호
• /
• pp.317-324
• /
• 1999

This study was conducted to decide several design criterion for clean-washed rice processing system development. A Computer simulation was used to predict and analyze the mass balances and moisture changes of the process of clean-washed rice processing system. The following results were obtained from this study. 1. In order to attain the processing capacity of 1,000kg/h of the clean-washed rice processing system, that of the system was designed as 1,400kg/h which was based on the safety factor of 40% and handling capability of mass variations occurred during processing. 2. It was analyzed that the proper time required for aqueous cleaning process should be within one minute. 2. It was analyzed that the proper time required for aqueous cleaning process should be within one minute. 3. The final moisture content of clean-washed rice was controlled being 15%(w.b.) for the sake of safe storage. 4. It was proven that the optimum drying time was three minutes for the clean-washed rice dried by a rotary dryer.

• 한국멀티미디어학회논문지
• /
• 제17권2호
• /
• pp.257-265
• /
• 2014

3D입체영상은 인간의 눈을 지향하면서 하드웨어의 발전에 따라 새롭게 부각되고 있다. 그러나 3D입체영상은 두 대의 카메라 또는 두 개의 렌즈를 사용하면서 2D영상의 제작에 비해 많은 시간과 노력을 필요로 한다. 본 연구에서는 3D입체영상의 제작기법을 활용하여 라이더영상을 제작하기 위한 시스템의 장단점을 분석하고, 효과적인 입체감의 형성을 위한 요소를 적용하여 연출의도에 부합하는 3D입체 라이더영상을 제작할 수 있는 방안을 모색하였다. 연구결과 3D입체 라이더영상은 장르적 특성으로 인해 경량화된 일체형 시스템이 효과적이었으며, 후반작업에서의 Time Remapping, 색보정, 그래픽요소의 추가를 고려한 로케이션 촬영이 요구되었다.

• 한국농공학회지
• /
• 제35권3호
• /
• pp.130-139
• /
• 1993

In order to evaluate the long-term permeability performace of the geotextiles, for five different combination of geotextiles and soils the long-term column test method The results obtained are as follows; 1.The gradient range of the initial stage of the long-term permeability curves varied with respect to the soil types, while that of the final stage varied according to the interaction of the soil/geotextile system. 2.The time required for a given soil/geotextile system to reach a interactive stable stage was measured ahout 100 hours for the standard sand and 150 to 600 hours for the silty content soils, respectively. 3.There were no differences between the plain woven geotextile and the non-geotextile in the long-term permeability performance. 4.As the silt content increased, the long-term performance of the geotextiles decreased, and the limiting silt content was about 15%. 5.The thickness and area density of the geotextiles did not influence on the variation of the seepage quantities. 6.The ayerage slope and the transition time of the long-time flow curve were calculated. 7.In order to evaluate the mechanism of soil/geotextile system more perfectly, the gradient ratio test or the hydraulic conductivity test is required.

• 대한의용생체공학회:의공학회지
• /
• 제10권2호
• /
• pp.131-138
• /
• 1989

In this paper the feature of background EEG is extracted by LS Prony Method for the analysis of background EEG in the time domain. Autocorrelation leg estimates are not required with the LS Prony method. The Prony method is required any the solution of two serfs of simultaneous linear equation and a polynominal rooting. That the optimal order of this model is the 6-th order is determined by using Akaike' s Information Criterial test. From the experimential results the alpha band amplitude is the largest among alpha band beta band theta band delta band and beta band amplitude is larger than that of the delta band and theta band. The sustained time for the alph a band, the beta band, the delta band and the theta band is 2, 3461 (sec), 0.6490(sec), 0.3120(sec), 0.7046(sec) respectively. Consequenty the alpha band is maintained in the whole subjects, the beta band, the delta band, the theta band are existed intermittently in each subjects.

• 한국정보통신학회논문지
• /
• 제13권5호
• /
• pp.1030-1037
• /
• 2009

현재 SAW 센서는 많은 발전을 해왔고 온도나 압력용 SAW 센서를 저전력, 고속 신호 처리로 하기 위해서는 TDS(Time Domain Sampling) 방식을 이용한 리더기 플랫폼이 필요하다. 이러한 리더기를 제작하기 위해서는 SAW 센서의 표준 응답신호와의 변화된 응답시간과의 짧은 시간차를 측정하기 위해 고속의 타이머가 필요하게 된다. 여기서 제안하는 플랫폼은 SAW 센서에 신호를 받아서 비교기로 아날로그 신호를 디지털 신호로 전환하여 그 전환된 신호를 타이머 모듈에서 읽어 들여 신호들의 시간차를 측정하여 표시하여 나노초(Nano Second) 단위의 시간을 측정하는 방법을 제안 하고자 한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1378-1383
• /
• 2003

Synthesis of carbon nanofibers on a metal substrate by an ethylene fueled inverse diffusion flame was illustrated. Stainless steel plates were used for the catalytic metal substrate. The effects of radial distance and residence time of the substrate were investigated. The role of hydrocarbon composition in the fuel was also viewed. Nanofibers with a diameter range of 30-70 nm were found on the substrate. The carbon nanofibers were formed and grown in the region from 4 to 5.5 mm from the central axis of a flame outside of the visible flame front in the radial direction. The minimum residence time required for the formation of carbon nanofibers were about 20 seconds, and over 60 seconds were required for the full-scale growth. The characteristic time of the formation of carbon nanofibers was much shorter than that of the substrate temperature growth. In this study, the variation in hydrocarbon composition had no significant effect on the formation and growth of the carbon nanofibers.

• 대한기계학회논문집A
• /
• 제24권8호
• /
• pp.1958-1967
• /
• 2000

Rapid Prototyping( RP ) has been increasingly applied in the process of design and development of new products. RP can shrink the time and expense required to bring a new product from initial concept to production. However, the necessity of using RP for short-run manufacturing is continuously driving a development of a cost-effective technique that will produce completely-finished quality parts in a very short time. To meet these demands, the improvements in production speed, accuracy materials, and cost are crucial. Thus, a new hybrid-RP system performing both deposition and machining in a station is proposed in this paper. It incorporates both material deposition in layers and material removal from the outer surface of the layer to produce the required surface finish. The new hybrid-RP system can dramatically reduce the total build time and fabricate largo-sized and freeform objects because it uses very thick layers, i.e.

• Journal of the korean society of oceanography
• /
• 제34권4호
• /
• pp.200-206
• /
• 1999

Seawater sampling is the primary task for the study of the marine environmental parameters that require shipboard or laboratory experiments for their analyses, and is also required for the calibration of some instruments for in situ measurement. A new automatic bottle (AUTTLE) is developed for seawater sampling at any desired time and water depth by self-triggering. Both any type of single or assembled mooring for 15 days and manual actuation by using a remote messenger as existing instantaneous single point water samplers are possible. Its sampling capacity and the resolution of time setting are 2 liters and 1 second, respectively. The result of a field experiment with an optical backscattering sensor (OBS) and a total of 14 AUTTLES for the in situ calibration of the OBS shows that the AUTTLE must improve our understanding on the behavior of the sand/mud mixtures in the environments with high waves and strong tides. The AUTTLE will serve as a valuable instrument in the various fields of oceanography, especially where synchronized seawater sampling at several sites is required and/or the information in storm period is important.