• 한국의류산업학회지
• /
• 제10권4호
• /
• pp.436-444
• /
• 2008

Recycle fashion is suggested to the suitable alternative of the environmental problem and the exhaustion of natural resources. The purpose of this study is focused on trying to comprehend between design characteristics and aesthetic values of recycle fashion design and those from fashion brands, fashion designers, and the public. For such purpose, 1553 photos of recycle fashion design which appeared in web-site, newspaper, fashion magazines between 2002 and 2007 were analyzed. Method of analysis did content analysis. The results of the research can be summarized as follows. First, design characteristics of recycle fashion were expressed by Junk Recycle Look, Vintage Recycle Look, Contemporary Recycle Look, Artisanal Recycle Look. Second, the expression methods of recycle fashion were presented reuse, reform, and regeneration. Third, aesthetic values of recycle fashion can be explained by the promotion of environment, the variableness, and the deconstruction.

• 한국환경과학회지
• /
• 제22권11호
• /
• pp.1383-1388
• /
• 2013

The pilot plant experiment was performed to investigate phosphorus and nitrogen removal from domestic wastewater by MLE process combined with aluminum corrosion reactor. When operating 0.5Q and 1Q to internal recycle and sludge recycle in the MLE process, the effluent $COD_{Mn}$ concentration of internal recycle 0.5Q were higher than internal recycle 1Q, the removal efficiency rates of $NH_3$-N in the internal recycle 0.5Q were was higher than internal recycle 1Q. Denitrification rates were about 86.8% in internal recycle and sludge recycle 0.5Q. When operating 0.5Q to internal recycle and sludge recycle in the MLE process, the removal efficiency rates of total nitrogen was the highest. The removal efficiency rates of total phosphorus was about 91.5% in the aluminum corrosion reactor.

• 한국환경과학회지
• /
• 제2권4호
• /
• pp.317-324
• /
• 1993

Effluent recycling effect on UASB reactor performances is known as an important operational factor. In the present study, the possibility of intermittent recycle in UASB process for saving the power consumption was examined at different organic loading and various operational modes in recycle time period. The organic removal efficiencies of the reactors operated with the intermittent effluent recycle were considerably higher compared to those without the effluent recycle. In the intermittent recycle mode, the organic removal efficiencies slightly decreased as the non-recycle time period in the operational mode increased. Proper ratio of recycle and non-recycle time period in the mode seemed to be required to prevent the produced biogas from accumulation in the sludge bed, which caused dead zone in the reactor and sludge loss when the gas was escaped from the bed at the certain pressure.

• 한국기술혁신학회:학술대회논문집
• /
• 한국기술혁신학회 2006년도 The 1st China-Korea Conference on Innovation Studies
• /
• pp.103-116
• /
• 2006

The recycle economy is the first stage of knowledge economy. In March 2005, the author attended the forum of 'Festival of Thinkers' in the capital of United Arab Emirates, Abu Dhabi. Through five day' discussing with 10 Nobel Prize winners and 18 thinkers from five continents, the conception of Recycle Economy is regulated. The former principle of '3R' in clean production has been expanded to '5R' in new recycle economy, adding concept of 'rethink' and 'repair' to the 'reduce, reuse and recycle' This article makes a full exposition to the origin, contents and its innovation to the classical western economics of the new recycle economics. Before the 2008 Beijing Olympics, the article discusses the application of new recycle economy in terms of promoting the ability of national innovation system and independent innovation, city construction and the industry innovation concerning Beijing's features.

• 한국환경과학회지
• /
• 제11권12호
• /
• pp.1261-1265
• /
• 2002

This study was focused on the investigation of the characteristics of organics and nitrogen removal with the recycle ratio in anoxic/oxic(A/O) packed bed process that consisted of the anoxic reactor and the aerobic reactor. As increasing the recycle ratio by 0.5, 1.0, 2.0, the COD removal efficiency increased by 94.0%, 98.5%, 98.8% respectively. The aerobic reactor showed the perfect nitrification efficiency by 98.5%, 99.2%, 98.0% respectively. The T-N removal efficiency with the recycle ratio, increased by 56%, 67%, 70% respectively. As increasing the recycle ratio by 0.5, 1.0, 2.0, T-P removal efficiency decreased by 62.1%, 57.4%, 51.3% respectively. The process by releasing the stored phosphorus in the anoxic reactor and uptaking the excess phosphorus in the aerobic reactor, occurred well comparatively when recycle ratio is 0.5. But this process did not occur when the recycle ratio is 1.0 and 2.0. And optimum pH of nitrification was about 6~7 and alkalinity decreased as nitrification rate increased. As increasing the recycle ratio in the anoxic reactor, DO concentration and ORP increased.

• KSBB Journal
• /
• 제4권1호
• /
• pp.11-14
• /
• 1989

Tower fermentor를 이용한 연속 알콜발효에서 cell re-cycle과 aeration에 대한 영향을 검토하였다. 균주는 floc-culationg 효모인 Saccharomyces cerecisiae TS4를 를 사용하였다. 15% glucose를 사용한 cell recycle system의 연속 알콜발효에서 cell 농도는 50%/1였고, ethanol productiv는 26.4g EtOH/l-hr로서 cell농도가 가장 높은 값을 나타내었으며, aeration rate는 3.8$\times$ $10^-^3$ VVM이상부터는 ethanol pro-ductivity가 감소하였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제32회 KOSCO SYMPOSIUM 논문집
• /
• pp.69-74
• /
• 2006

An Experimental study was conducted on $CO_2$ recycle combustion heating system using pure oxygen instead of conventional air as an oxidant, which is thereby producing a flue gas of mostly $CO_2$ and water vapor($H_2O$) and resulting in higher $CO_2$ concentration. The advantages of the system are not only the ability to control high temperatures characteristic of oxygen combustion with recycling $CO_2$. but also the possibility to reduce NOx emission in the flue gas. A small scale industrial reheating furnace simulator and specially designed variable flame burner were used to characterize the $CO_2$ recycle oxy-fuel combustion, such as the variations of furnace pressure, temperature and composition in the flue gas during recycle. It was found that $CO_2$ concentration in the flue gas was about 80% without $CO_2$ recycle, but increased to $90{\sim}95%$ with $CO_2$ recycle. The furnace temperature and pressure was decreased due to recycle and the NOx emission was also reduced to maintain under 100ppm.

• Nuclear Engineering and Technology
• /
• 제53권4호
• /
• pp.1176-1180
• /
• 2021

The current study relates to RADAR (RAdio Detection and Ranging) application for level measurement of vitrified radioactive liquid nuclear waste. The vitrification of radioactive liquid waste is carried out in special equipment called 'Melters'. The study is directed towards the design and frequency modulation used in the level measurement of vitrified waste. More specifically, the RADAR design and frequency used for level measurement in a melter. This level measurement technique can also be used for dynamic vitrification process and can be used to measure the level variations without using any external medium/material and using only electromagnetic waves. Also, this technique is durable and accurate even under the high radioactive environment present inside the melter.

• 한국실내디자인학회논문집
• /
• 제19권1호
• /
• pp.16-26
• /
• 2010

In recent, as rediscovery of the modern value is developed through the support by the government and the reinterpretation of the traditional culture, a Korean-style house(Hanok) also becomes an object of interest. Among these various viewpoints to see the Korean-style house, the necessity of a new spatial design approach to contain the types and functions of the architectural space of the Hanok appropriate to the modern society is raised which is not a passive approach to preserve the existing cultural assets. Out of the methods of the new spatial design of the Hanok which reflect the paradigm of the times, this study has the purpose to make an approach from the viewpoint of 'Restoration design'. As the 21 st century started, the recycle design whose active discussion and performance is made largely by Europe and Japan can be called a design method in the hardware part which enables continuous adaptive use of a building by applying a new use purpose and method to a building which doesn't use the recycle design or has low efficiency. In that meaning, it can be considered to be a very important architectural activity historically, archltecturally and spatially. Based on the methodological characteristics of the recycle design, this study largely divides the types of recycle into coherent recycle and imagery recycle and dedto s detailed methods of space, consinto ion and material and wardrobe used for each case to analyze the methods of concrete recycle design through the methodological analysis of recycle cases of the existing modern buildings. For the objects of recycle cases of the Hanok made recently based on the design methods acquired here, it was examined how the architectural and spatial characteristics of the Hanok can be reconsinto ed through what kinrecycmethods. The approach of the recycle design is considered to be a cornerstone to show a new architectural and spatial value in the viewpoint of the Hanok existence in modern times.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2003년도 학술.기술논문발표회
• /
• pp.89-94
• /
• 2003

Recently, the study to reduce and recycle industrial waste is underway vigorously in the various fields of industry according to the conservation of environment and resources. In construction work, the disposal problem of its waste and environmental disruption have already been serious all over the world. However the recycle of waste concrete is still at an early stage, recycled aggregate from waste concrete have only used those as subsidiary road fillers. The research institute and the company make the study that it is about the properties of recycled aggregate and those structural capacity since 1990. Through the experimentation last year, we know that strength and fluidity of recycle cement are inferior to normal cement, and admixing aggregate powder deteriorates its strength. The purpose of this study is to search for appropriate heating time and to improve performance of the recycle cement while heating hardened cement which is crushed, we investigate separating aggregate from hardened cement by preheating and improvement of strength and fluidity inrecycle cement which contains admixture.