• 대중서사연구
• /
• 제25권2호
• /
• pp.73-116
• /
• 2019

최근 텔레비전드라마에서는 판타지를 경유하여 정의로운 사회를 상상하는 방식이 대두되고 있다. 본고는 이러한 경향을 선도하고 있는 박혜련 작가의 <너의 목소리가 들려>, <피노키오>, <당신이 잠든 사이에>에 나타난 사회 정의의 양상을 단계적으로 고찰한 글이다. <너의 목소리가 들려>는 사법정의가 무너진 사회를 배경으로 하여 사회 정의가 왜 필요한지를 말하는 작품이다. 이 작품에서 무너진 사법정의는 민주주의 사회의 시스템이 근본에서부터 무너지고 있음을 보여준다. 그로 인해 수많은 소시민들의 고통이 양산되고 사회 정의는 이런 문제적 현실의 대안으로써 요청되기 시작한다. 또한 타인의 생각을 읽는 초능력은 진실과 믿음의 가치를 상기시키고, 진심이 지닌 대안으로서의 가능성을 사회 정의의 측면에서 제시하게 된다. 다음 작품인 <피노키오>는 언론정의가 왜곡된 사회를 배경으로 하여 사회 정의에 대한 사유의 전환을 시도하는 작품이다. 이 작품에서 부패한 언론정의는 진실을 호도하고 권력에 기생하면서 억울한 피해자들을 발생시킨다. 이러한 상황에서 거짓말을 하면 딸꾹질을 하는 피노키오 증후군은 오히려 진실이 왜곡될 수 있음을 역설적으로 보여주고, 궁극적으로는 진실이 지닌 절대성을 해체시킨다. 마지막 작품인 <당신이 잠든 사이에>는 전작들의 세계관을 이어받아 공동선이라는 사회 정의를 대안으로 제시하는 작품이다. 사법정의가 무너지고 언론정의가 왜곡되면서 완전한 부정사회가 만들어진다. 이러한 상황에서 미래를 보는 능력은 가능성의 세계를 상상하는 능력이라 할 수 있고, 타인에 대한 믿음을 바탕으로 이뤄지는 이타적인 선택은 긍정적인 미래를 실현시키게 된다. 주체들의 시공을 초월한 연대를 가능케 하는 이러한 공동선으로서의 사회 정의는 부정사회를 극복할 수 있는 대안으로 제시된다. 최근 한국사회의 현실에 비추어 볼 때 이러한 공동선과 그러한 삶의 방식은 말 그대로 판타지일지도 모른다. 하지만 현존하는 사회의 문제를 극복하고 보다 나은 미래를 만들고자 하는 노력과 재구축의 과정이 사회 정의를 의미한다고 할 때, 타자에 대한 이해와 공감을 바탕으로 하는 공동선은 오히려 문제적인 현실을 근본에서부터 개선하는 대안이 될 수 있다. 결국 박혜련 작가의 세 작품은 아직은 오지 않은 정의사회의 실현 가능성을 공동선의 측면에서 타진하는 작품들이라고 할 수 있다.

• 헤리티지:역사와 과학
• /
• 제55권4호
• /
• pp.96-116
• /
• 2022

대보단은 명나라 황제인 태조, 신종, 의종의 제사를 지내는 제단이다. 황단이라고도 불리는 이 시설은 1704년에 처음으로 건설되었다. 임진왜란 때 조선에 원군을 보내준 신종에 대한 보은의 뜻으로 건립된 것이다. 노론의 영수였던 송시열은 이미 화양동에 신종을 위한 건물을 짓고 제례를 지냈었는데 이것이 국가적인 의례로 확대된 것이다. 당시의 대보단 건립은 창덕궁 후원 영역을 크게 바꿔 놓았으며, 후원 서북쪽으로 영역이 확장되었다. 하지만 당시 대보단의 건축과정만을 살펴본다면 대보단에 커다란 의미를 부여했다고 보기에 무리가 있다. 입지선정 과정에서 공간적으로나, 의례적으로 가장 적합한 곳은 후원의 내빙고터였다. 그럼에도 빙고를 옮길 방안이 마련되지 않자 궁궐 담장 바깥에 위치한 별대영터에 건립하는 것으로 대신했다. 단을 건립하기 위한 석재는 새로 채석하지 않고 이곳저곳에서 변통한 것을 재활용했다. 별대영의 행각은 커다란 변경 없이 그대로 대보단 행각으로 전용했다. 건축공사의 규모만을 따지자면 그리 대단한 공사가 아니었다는 것을 알 수 있다. 숙종은 대보단 건립 후 몇 차례 제례를 치른 다음에는 대보단에 별 관심을 보이지 않았다. 대보단이 다시 역사에 크게 등장한 것은 영조에 의해서였다. 영조도 재임 초기에는 대보단에 별다른 관심을 보이지 않았다. 하지만 1740년대 들어 대보단에 지대한 관심을 갖기 시작했고, 수차례에 걸친 대보단 중수가 진행됐다. 1739년에는 제기고를 중건했다. 또 1745년에는 재실을 건립하면서 대보단 의식 전날에 들러 하룻밤을 보내도록 의례를 정비했다. 1749년에는 대보단에 의종과 태조를 봉안하면서 대대적인 대보단 증수가 이루어졌고, 기존의 대보단과 전혀 다르게 형태가 변경되었다. 이때 조성된 단은 새롭게 채석한 석재를 사용해서 쌓은 것이었다. 또 전사청, 재생청, 악공청 등 새로운 건물을 추가로 건립하기도 했다. 1762년에는 대보단에 공신을 종향하면서 지속적으로 대보단이 창덕궁 후원에서 중요한 곳이 되었다. 정조 재위 기간에도 대보단은 창덕궁 후원에서 중요한 위치를 점하고 있었다. 하지만 대보단에서 건축적으로 커다란 중수가 진행되지는 않았다. 다만 1799년 창경궁에 위치했던 경봉각을 대보단 내부로 이건한 일이 있었다. 이후 대보단 제례는 계속되었지만 커다란 건축적 변화는 없었고, 1908년에 제향이 중지되면서 역사에서 사라지게 되었다.

• 한국체육학회지인문사회과학편
• /
• 제54권5호
• /
• pp.867-876
• /
• 2015

본 연구의 목적은 지체장애인의 생활체육 참여정도가 긍정심리자본(PPC)에 미치는 영향을 규명하고자 하였다. 연구의 목적을 달성하기 위하여 B시에 거주하고 있으며 생활체육에 참여하고 있는 지체장애인 212명의 자료를 분석하였다. 측정도구는 전상완 및 양종훈(2009)의 생활체육 참여정도와 Luthans, Youssef, & Avolio(2007)가 개발한 척도를 임태홍(2014)이 재구성한 긍정심리자본(K-PPC)을 수정·보완하여 재구성하였다. 자료처리는 SPSS 18.0 프로그램을 사용하여 탐색적 요인분석, 신뢰도 검증, 차이검증과중다회귀분석을 실시하였다. 첫째, 지체장애인의 인구사회학적 특성 중 성별, 연령, 장애등급에 따른 긍정심리 자본에는 유의한 차이가 있는 것으로 나타났다. 둘째, 지체장애인의 생활체육 참여정도(기간, 빈도, 강도) 하위 변인 중 참여빈도, 참여강도는 자기효능감에 유의한 영향을 미치는 것으로 나타났으며, 반면 참여기간은 유의한 영향을 미치지 않는 것으로 나타났다. 셋째, 참여빈도는 낙관주의에 유의한 영향을 미치는 것으로 나타났으며, 반면 참여기간, 참여강도는 유의한 영향을 미치지 않는 것으로 나타났다. 넷째, 참여빈도, 참여강도는 희망에 유의한 영향을 미치는 것으로 나타났으며, 반면 참여기간에는 유의한 영향을 미치지 않는 것으로 나타났다. 다섯째, 참여빈도는 회복탄력성에 유의한 영향을 미치는 것으로 나타났으며, 반면 참여 기간, 참여강도에 유의한 영향을 미치지 않는 것으로 나타났다. 여섯째, 참여빈도, 참여강도는 긍정심리자본에 유의한 영향을 미치는 것으로 나타났으며, 참여기간에는 유의한 영향을 미치지 않는 것으로 나타났다.

• 헤리티지:역사와 과학
• /
• 제56권2호
• /
• pp.246-262
• /
• 2023

본 연구는 사라진 문화재인 돈의문이 어떻게 디지털로 복원이 되었는지, 돈의문 복원이라는 정책집행 과정에 초점을 맞추어 정책집행 요인을 분석하였다. 이를 통하여 민관 다자간 협업으로 추진된 디지털 돈의문 복원 정책의 집행과정에 있어서 특성을 살펴 보고 이해관계가 다른 기관이 어떻게 집행 과정 속에서 문제를 해결하고 협업을 이루었는지 시사점을 얻고자 하였다. 연구방법은 정책 집행과정을 정책집행자 요인, 정책집행 내용 요인, 정책집행 자원 요인, 정책집행환경 요인으로 나누어 각각의 세부 구성요인별로 분석하였다. 이를 위하여 정책집행 참여자들의 심층인터뷰, 문헌 분석을 조사 하였다. 연구결과 정책집행자 요인에서 정책책임자의 신속한 의사결정 리더십과 정부기관 담당자의 유연한 태도는 각기 다른 이해집단의 갈등을 방지하는데 긍정 영향을 준 것으로 나타났다. 둘째, 정책집행 내용에서는 모두가 수긍할 수 있는 공동목표를 정립하여 일관성 있게 나아간 것이 신뢰를 주었고 시너지를 내게 하였다. 셋째, 정책집행 자원요인에서는 무엇보다 물적 자원인 예산의 중요성이 강조되었다. 마지막으로 정책집행의 환경 요인으로는 정책 추진 당시 4차산업혁명 부각과 함께 5G 이동통신이 세계 최초로 국내에서 개통된 부분이 시기적절한 요소로 작용하였다. 다만, 현재의 디지털 복원 기술이 곧 과거의 기술이 되는 것은 앞으로의 과제라고 할 수 있다. 디지털 돈의문은 사라진 문화재를 AR, VR로 복원한 최초의 사례로 대중매체의 관심과 지지를 받았고 대중의 관심을 끌었다. 이는 또한 디지털 복원이 문화재가 위치한 지역주민과의 갈등이나 실물의 보존과 복원에 있어 이해관계자들의 갈등 없이도 해결 방안이 될 수 있는 모범 사례가 될 수 있음을 보여준다 하겠다.

• 헤리티지:역사와 과학
• /
• 제56권1호
• /
• pp.64-78
• /
• 2023

이 글은 설산 천희(雪山 千熙, 1307~1382)가 영주 부석사에 조사당을 건립하게 된 배경과 의미를 조사당 벽화를 통해 살펴본 것이다. 조사당의 남벽(출입구 위치)에는 북벽에 위치한 의상 대사상을 마주 보며 6구의 신장(사천왕과 그 양 옆으로 제석천과 범천)이 그려져 있다. 이 신장 그림은 우리나라 사찰 벽화 중 가장 오래된 작품으로 매우 독특한 특징을 보인다. 사찰 전각의 내벽에는 경전에서 묘사하는 장면들을 그리는 것이 일반적이지만 조사당에는 이런 종류의 벽화는 없으며 신장들만 그려져 있다. 이는 유일한 예이며, 승려상과 마주보는 위치에 신장들이 그려진 예도 찾아볼 수 없다. 주인공인 승려(의상대사)를 외호하기 위한 신장의 배치와 부조상(浮彫像)을 그림으로 번안한 듯한 표현상의 특징은 특히 주목을 요한다. 그 구성과 표현이 팔각의 탑신 표면에 신장상을 새긴 나말여초 선종의 석조승탑과 유사하기 때문이다. 도상 또한 나말여초기 신장과 유사성을 지닌 고식이다. 이중 동방과 서방천왕의 존명에 대해서는 이견이 있었는데 이 글에서는 나말여초 승탑의 사천왕 배치 순서에 근거하여 이들의 명호를 제시하였다. 한편, 해동 화엄의 초조 의상 대사를 기념하여 조사당을 건립하고 이를 외호하는 신장들을 배치했다는 것은 개산조에 대한 숭배 개념을 드러낸다. 따라서 조사당 건립의 목적 또한 선종 승탑 건립 이념의 연장선에서 찾았다. 문제는 설산 천희가 화엄종 승려이고 부석사는 대표적인 화엄 사찰이라는 점에 있다. 따라서 이 글에서는 조사당 건립의 배경을 이해하기 위해 14세기 고려 불교계의 상황과 창건주 설산 천희의 행적을 살펴보았다. 14세기에는 간화선이 우위에 있었기 때문에 천희는 58세의 노령에도 원나라에 유학하여 간화선사의 인가를 받아온 뒤 국사의 자리에 올랐다. 그러나 결국 부석사로 밀려나 부석사 중창에 힘쓰게 된다. 천희는 아마도 사찰 중창을 통해 부석사의 위상을 높이고 선종에 위축되어 가던 화엄종의 발전을 모색했던 것으로 보인다. 14세기 선종의 부상 아래 힘을 잃어가던 화엄종이 그 발전을 모색하는 시도 속에서 조사당을 건립하였고 이러한 염원이 벽화의 특징으로 잘 드러난다는 점에서 조사당 벽화의 불교사적인 가치 또한 크다고 할 수 있다.

• 헤리티지:역사와 과학
• /
• 제56권1호
• /
• pp.22-43
• /
• 2023

본 논문은 만공이 1924년에 조성한 정혜사 석조관음보살입상에 대해 다루고 있다. 정혜사 석조관음보살입상은 만공이 제작한 현존하는 가장 이른 시기의 불상으로, 정혜사가 중창되는 과정에서 상징성이 부여된 작품이다. 지금까지 만공이 주도한 불사와 구체적 유물을 통해 사상과 신앙에 접근한 연구는 없었다. 본 연구에서는 만공이 남긴 법어와 일화 및 일제강점기 신문기사 등을 활용하여, 만공이 주석하던 시기 정혜사와 수덕사의 역학 관계를 추적하고 대형 보살상 조성으로 얻은 효과와 그 조성 위치가 갖는 의미에 대해 고찰하였다. 이를 위해 당시 조각을 담당했던 석장 후손과의 면담을 시도하여 정확한 공사 기간과 장인의 명단을 확인하였다. 정혜사 석조관음보살입상에서 보이는 이중보개와 방형보관, 신체에 비해 크게 표현된 손, 두부와 신체의 비례, 석주(石柱)와 같은 체구에서 느껴지는 괴량감 등은 관촉사 석조보살입상에서 영향을 받은 것으로 판단하여 고려 초기에 제작된 관촉사 석조보살입상이 어떻게 근대기 보살상 조성에까지 영향을 미칠 수 있었는지에 대해 살펴보았다. 또한 일제강점기 철도 부설을 계기로 시작된 관촉사 참배와 1929년에 개최된 조선박람회에서 충남을 대표하는 상징으로 활용된 관촉사 보살상의 이미지가 양식의 계승과 변용이라는 관점에서 어떻게 활용되었는지 다각적인 분석을 시도하였다. 본 연구를 계기로 근대기를 대표하는 선사 만공에 대한 이해와 근대기 한국 불교조각 연구의 지평이 넓어지길 기대한다.

• 핵의학기술
• /
• 제27권2호
• /
• pp.99-109
• /
• 2023

Purpose: CT scan makes up for the weak point of the nuclear medicine image having a low resolution and also were used for attenuation correction on image reconstruction. Recently, many studies try to make use of CT images additionally, one of them is to measure the bone mineral density(BMD) using Quantitative CT(QCT) software. BMD exams are performed to scan lumbar and femur with DXA(Dual-Energy X-Ray Absorptiometry) in order to diagnose bone disease such as osteopenia, osteoporosis. The purpose of this study is to identify the usefulness of QCT_BMD analyzed with low dose CT images on L-spine Bone SPECT/CT comparing with DXA_BMD. Materials and Methods: Fifty five women over 50 years old (mean 66.4 ± 9.1) who took the both examinations(L-spine Bone SPECT/CT with SIEMENS Intevo 16 and DXA scan with GE Lunar prodigy advance) within 90 days from April 2017 to July 2022, BMD, T-score and disease classification were analyzed. Three-dimensional BMD was analyzed with low dose CT images acquired on L-spine Bone SPECT/CT scan on Mindways QCT PRO^TM software and two-dimensional BMD was analyzed on DXA scan. Basically, Lumbar 1-4 were analyzed and the patients who has lesion or spine implants on L-spine were excluded for this study. Pearson's correlation analysis was performed in BMD and T-score, chi-square test was performed in disease classification between QCT and DXA. Results: On 55 patients, the minimum of QCT_BMD was 18.10, maximum was 166.50, average was 82.71 ± 31.5 mg/cm³. And the minimum of DXA-BMD was 0.540, maximum was 1.302, average was 0.902 ± 0.201 g/cm², respectively. The result shows a strong statistical correlation between QCT_BMD and DXA_BMD(p<0.001, r=0.76). The minimum of QCT_T-score was -5.7, maximum was -0.1, average was -3.2 ± 1.3 and the minimum of DXA_T-score was -5.0, maximum was 1.7, average was -2.0 ± 1.3, respectively. The result shows a statistical correlation between QCT T-score and DXA T-score (p<0.001, r=0.66). On the disease classification, normal was 5, osteopenia was 25, osteoporosis was 25 in QCT and normal was 10, osteopenia was 25, osteoporosis was 20 in DXA. There was under-estimation of bone decrease relatively on DXA than QCT, but there was no significant differences statistically by chi-square test between QCT and DXA. Conclusion: Through this study, we could identify that the QCT measurement with low dose CT images QCT from L-Spine Bone SPECT/CT was reliable because of a strong statistical correlation between QCT_BMD and DXA_BMD. Bone SPECT/CT scan can provide three-dimensional information also BMD measurement with CT images. In the future, rather than various exams such as CT, BMD, Bone scan are performed, it will be possible to provide multipurpose information via only SPECT/CT scan. In addition, it will be very helpful clinically in the sense that we can provide a diagnosis of potential osteoporosis, especially in middle-aged patients.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 한국산림과학회지
• /
• 제48권1호
• /
• pp.1-24
• /
• 1980

우리나라에서 도로(道路)의 녹화(綠化) 및 조경(造景)에 관(関)한 새로운 기술(技術)의 개발(開発) 및 발전(発展)을 위한 주요한 기초과제중(基礎課題中)의 하나는 현재(現在)까지 시행(施行)되고 있는 이 분야(分野)의 기술현황(技術現況)을 조사분석(調査分析)하여 현재(現在)의 기술수준(技術水準)을 평가(評価)하고, 이러한 자료(資料)와 선진국(先進国)의 기술(技術)을 종합(綜合)하여 우리나라의 실정(実情)에 적용(適用)할 수 있는 도로녹화조경기술기준(道路綠化造景技術基準)을 설정(設定)함에 있다고 본다. 도록녹화조경기술(道路綠化造景技術)은 도로(道路)의 녹화(綠化) 및 경관(景観)의 조성(造成)과 도로환경(道路環境)의 수복보전(修復保全)을 통하여 도로기능(道路機能)을 향상(向上)하기위하여 도로용지내(道路用地內)에 식물(植物) (녹색환경(綠色環境))을 도입(導入)하는 녹화(綠化) 및 조경기술(造景技術)로서 최근(最近)에 와서는 도로(道路)의 녹화조경면(綠化造景面)에서 뿐만 아니라 국민(国民)의 생활환경보전면(生活環境保全面)에서도 그 중요성(重要性)이 강조(强調)되고 있다. 1. 도로녹화조경(道路綠化造景)의 기본기술(基本技術)은 도로건설예정지내(道路建設豫定地內)에 있는 기존 유용자연식생(有用自然植生)을 최대한(最大限) 보존활용(保存活用)함은 물론 도로건설시(道路建設時) 또는 건설후(建設後)에 각종(各種) 조경식물(造景植物)을 식재육성(植栽育成)하는 것이므로, 이러한 도로식재(道路植栽)는 조속히 도로환경(道路環境)을 녹화(綠化)하고 보다 아름다운 도로경관(道路景観)을 조성(造成)하여 쾌적(快適)한 도로(道路)가 되도록 계획(計劃) 설계(設計) 시공(施工) 관리(管理)해야 될 것이다. 2. 도로녹화조경(道路綠化造景)의 기본대상(基本対象)은 도로녹화(道路綠化), 보도식재(步道植栽) 및 식수대(植樹帶) 환경시설대(環境施設帶) 및 꽃동산, 가로수등(街路樹等)의 식재(植栽) 및 조성(造成)과 도로(道路)비탈면의 안정녹화조경(安定綠化造景)이며 그밖에 중앙분리대(中央分離帶) 및 교통도(交通島), "인터체인지" 및 휴게시설등(休憩施設等)도 필수요소(必須要素)가 된다. 3. 도로녹화조경기술개발(道路綠化造景技術開発)의 기본방향(基本方向)은 도로교통(道路交通)의 안전(安全)과 쾌적성(快適性)을 높이고 연도(沿道)의 자연환경(自然環境)의 보전(保全) 및 생활환경(生活環境)의 녹화개선(綠化改善)에 기여하여 종합적(綜合的)인 도로기능(道路機能)을 발휘(発揮)할 수 있도록 설정(設定)해야 될 것이다. 4. 도로녹화조경(道路綠化造景)의 기본기능(基本機能)은 개개(個個) 수목(樹木)의 식재(植栽)로서 복수녹(複数綠)의 효용(効用)을 구성(構成)함에 있으며, 이러한 기본기능(基本機能)은 경관조성기능(景観造成機能)(경관조절기능(景観調整機能) 및 경관연출기능(景観演出機能)), 환경보전기능(環境保全機能)((재해방지기능(災害防止機能) 및 환경조화기능(環境調和機能)), 그리고 교통안전기능(交通安全機能) (유도기능(誘導機能), 사고방지기능(事故防止機能) 및 휴게조성기능(休憩助成機能)으로 대별(大別)하여 분석평가(分析評価)하는 제도(制度)가 수립(樹立)되어야 할 것이다. 5. 도로(道路)비탈면의 녹화조경시(綠化造景時)에는 특(特)히 교통안전성(交通安全性)의 확보(確保), 생활환경(生活環境)의 보전(保全), 경관(景観)의 조화(調和)와 창조(創造), 조경식물(造景植物)의 선택(選択) 및 생육기반(生育基盤)의 안정시(安定等)에 관(関)한 세부적인 조사(調査)가 선행(先行)되어야 한다. 6. 도로식재시공(道路植栽施工)에 있어서는 기본공정관리계획(基本工程管理計劃), 즉 품질관리(品質管理), 공정관리(工程管理), 안전관리(安全管理)에 관(関)한 사항(事項)은 물론 적기적수(適期適樹) 및 적지적수(適地適樹)가 되도록 해야 된다. 7. 녹화수(綠化樹)의 식재(植栽)(특(特)히 가로수(街路樹))에 있어서는 지주설치(支柱設置)의 재료(材料) 및 형식(型式), 시공(施工) 및 관리기술(管理技術)에 관(関)한 시험연구(試驗硏究)가 시급히 요망(要望)된다. 8. 도로녹화조경관리기술(道路綠化造景管理技術)의 기본방향(基本方向)은 풍부한 푸른경관(景観)과 쾌적(快適)한 도로환경(道路環境)을 지속적으로 확보(確保) 유지(維持) 향상(向上)할수 있도록 설정(設定)해야 될것이며, 이를 위해서는 수목(樹木)의 전정(剪定) 및 정자(整姿), 병충해(病虫害)의 방제(防除), 식재지(植栽地) 및 식재수(植栽樹)의 유지관리(維持管理)등에 대해서 정규적인 점검을 실시하여 필요(必要)한 조치를 제때에 취할수 있도록 하는 점검관리제(占検管理制)를 채택(採択)해야 될 것이다.