• Journal of Korean Institute of Industrial Engineers
• /
• v.31 no.4
• /
• pp.289-296
• /
• 2005

This study aims to measure maximum holding times(MHTs) of symmetric and asymmetric whole body postures, and to compare three representative observational methods including OWAS, RULA, REBA, based on the MHTs. An experiment was conducted for obtaining the MHTs, in which hand position was used as experimental variable, and the MHT and subjective discomfort rating as dependent variables. The hand position was defined by the percentage of the shoulder height(%SH), the percentage of the arm reach(%AR) and rotation angle(R). The results showed that three independent variables of %SH, %AR and R significantly affected on the MHTs at ${\alpha}$=0.01, and that the MHTs were negatively linearly related to the discomfort scores of Borg CR10. It was also revealed that OWAS and REBA were less sensitive to postural stress than RULA. In addition, OWAS and REBA underestimated postural load of given postures compared to RULA. Therefore, it is recommended that among the three observational methods investigated in this study, RULA be used for a more precise evaluation of postural load.

• Journal of Biosystems Engineering
• /
• v.33 no.3
• /
• pp.157-166
• /
• 2008

Protected horticulture is labor-intensive. It necessitates great amount of labor in many tasks including grafting, pollination and harvesting. Particularly, carrying crops involves the most intensive labor which leads to a high risk of musculoskeletal disorder. Thus, this study aims at developing an ergonomic vehicle to reduce this intensity of labor and ergonomic evaluation by applying the newly developed vehicles to REBA. 5 healthy male subjects with no records of any musculoskeletal disorder were participated in this study. The experimental units were divided into three categories: lifting, lowering and pushing tasks. The results showed that the developed vehicle received less loads in group B (arms and wrists) than in group A (trunk, neck and legs). Especially, the developed vehicle scored $1.0{\sim}4.4$ in group C on REBA while the conventional wheelbarrow got $3.0{\sim}7.6$, regardless of working postures. In conclusion, the developed ergonomic vehicle provided less loads for human bodies compared to the conventional one.

• Journal of the Korean Society of Industry Convergence
• /
• v.14 no.1
• /
• pp.29-36
• /
• 2011

This study analyzed the convenience and productivity before and after adopting self-propelled power transportation devices to the harvest and transportation of fruit and vegetable products in the Gyeongbuk region, by applying the REBA and RULA techniques. In the REBA analysis, the work risk was low with 4~6 points before adoption which became 2~3 points after adoption. As for the RULA analysis, work loading appeared to have decreased with 6~7 points before adoption which became 3~4 points after adoption. The annual work time reduction was about 48~179 hours while labor costs were reduced to 364~1,345 thousand won annually. This indicated a labor cost reduction effect of about 10~15%. Therefore, the adopted self-propelled power transportation devices appeared to prevent musculo skeletal diseases of the human body and also improve productivity even after using it for long hours according to the REBA, RULA measures level.

• Progress in Superconductivity and Cryogenics
• /
• v.24 no.4
• /
• pp.16-24
• /
• 2022

Applications of REBa₂Cu₃O_7-δ tapes require joints with a simple manufacturing process, low resistance and good mechanical properties. In the present study, we successfully developed a copper diffusion joint between Cu-stabilized REBa₂Cu₃O_7-δ tapes that meets the above requirements without solder simply by applying flux, heat and pressurization. After a 3 min thermocompression process at approximately 150 δ and 336 MPa in air, two tapes were directly connected between Cu stabilizers by copper diffusion, which was proven by microstructure analysis. The specific resistivity of the copper diffusion joint reached 5.8 nΩ·cm² (resistance of 0.4 nΩ for a 306 mm splicing length) at 77 K in the self-field. The axial tensile stress reached 200 N without critical current degradation. The results show promise for the preparation of copper diffusion joints to be used in coils, attached tapes, and wire/cable terminals.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.3
• /
• pp.445-453
• /
• 2012

The aim of this paper was to prove that if the risk level in combined tasks was improved through evaluation of postural load of liquid weight measurement process, the workload level and ratio of exposure time would be changed, and the time of process would be seen concurrently. Background: According to results of epidemiological studies conducted by Korea Occupational Safety & Health Agency, 122 musculoskeletal disorders occurred during 1992 to 2008, in which manufacturing industry covers 96(78.7%) of total. However, this is an insufficient level and only occupies 39% based on the South Korea's manufacturing standard industrial classification(246 industries). Method: Firstly, the number of batches weighed on one day(460min) was investigated based on the work performed and Weight measured weekly. VCR recording was taken based on the level of liquid ingredients prescribed for 1batch using the Camcorder. After dividing a 356 sec video into 1 sec using the screen capture function in Gom player, the job classification was performed by analyzing the change of working postures, which revealed 148 working postures. Time measurement was decided by time of the postures was being maintained. Then, the REBA analysis was performed for the working postures. The ratio of Exposure time was calculated based on the measurement time and REBA Score. In addition, the recommendations were designed and implementation was carried out for the working postures with REBA Score higher than 3. Finally, after the intervention, REBA measurement, time measurement, and ratio of exposure time were calculated for the comparison of works before and after improvement. Results: The number of work elements was decreased by 30.4% from 148 to 103 after improvement. The results of time measurement showed that the time was reduced by 46.3% from 356 sec to 191 sec. And the ratio of exposure time was also improved by 52.1% from 0% to 52.1% after improvement. Conclusion: The reduction of time was found to improve the productivity of management. Furthermore, because the reduction of ratio of exposure time and the improvement of workload level are the improvement of discomfort, it would contribute to the improvement of the worker's psychological working posture. Application: These results would contribute to musculoskeletal disease prevention and management performance. Further studies for other industries would be needed based on this case study.

• Journal of the Korean Society of Safety
• /
• v.22 no.4
• /
• pp.90-95
• /
• 2007

The objective of this study was to find the musculoskeletal stress problems at chicken farms in Korea. One typical chicken farm was surveyed in this study. NLE(NIOSH Lifting Equation), REBA(Rapid Entire Body Assessment), and OWAS(Ovako Working Analysis System) were used to evaluate the extent of the musculoskeletal stress. It was found that there were some tasks which required fast innovation. It was also found that the RWL (Recommended Weight of Lift) was 4.6Kg. that was lower than weights which were handled by these workers.

• Biomedical Science Letters
• /
• v.16 no.1
• /
• pp.10-18
• /
• 2010

The present study was set to develop comprehensive system for assessing the safety of drinking water using PCR-reverse blot hybridization assay (REBA). The REBA developed in this study can detect waterborne pathogens such as Shigella spp., Salmonella spp., Citrobacter spp., Enterobacter spp., Klebsiella spp., Yersinia spp., Mycobacterium spp., Listeria spp. at the genus level, and Escherichia coli, Citrobacter freundii, Klebsiella pneumoniae, Pseudomonas aeruginosa, Yersinia enterocolitica, Y. pseudotuberculosis, Mycobacterium avium complex, M. marinum, Enterococcus faecalis, and Staphylococcus aureus at the species level, and E. coli O157:H7 at the strain level.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.1
• /
• pp.97-102
• /
• 2011

This study was performed to design and develop an ergonomic equipment for strawberry sorting and packing in agricultural working environments. Potential risk of work related musculo-skeletal disorders associated with farm workers performing strawberry sorting and packing was analyzed through interviews, field surveys, work measurement, and working posture evaluation. For the evaluation of working posture, we used REBA, OWAS, and RULA assessment methods to identify multi-factorial risk factors. Based on the result of comprehensive assessment, a new concept of multi-level rotating table for strawberry sorting and packing was proposed to modify awkward working postures and improve the effectiveness of the farm work. Finally, the characteristics and effectiveness of new equipment was discussed in terms of improvements in productivity, safety, and subjective ratings of farm workers. The results of analysis showed that working conditions improved significantly.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05b
• /
• pp.1044-1047
• /
• 2011

본 연구는 소방대원의 현장 작업자세 평가와 분석을 통하여 소방대원의 근골격계 부담작업 유해요인을 분석하고자 한다. B시에 소재하고 있는 소방서의 남자 소방대원을 대상으로 소방 현장에서 많이하는 자세 중 요구조자 이송작업자세, 방수작업자세, 유압구조장비 작업자세, 만능도끼작업 자세를 인간공학적 평가 기법인 Rapid Entire Body Assessment(REBA), Rapid Upper Limb Assessment(RULA)와 NIOSH Lifting Equation(NLE)를 이용하여 평가하고 분석하였다. 자세 분석결과, RULA 분석에서 모든 작업이 최고 점수인 7점으로 평가되었고 REBA는 5점에서 10점까지로 RULA분석에 비하여 낮은 점수를 나타내었다. 따라서, 소방대원들의 작업환경과 자세에 문제가 많다는 것을 알 수 있었다.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.1
• /
• pp.153-158
• /
• 2013

Objective: This study aims to suggest different approaches in analyzing risks associated with musculoskeletal disorders (MSDS) for risk assessment. Background: Upon concluding that the changes in the industrial environments have made it hard to regulate diverse risk factors, the government has implemented a policy for risk assessment. Method: This study has proposed a method, creating programs using Excel that perform qualitative or quantitative analysis, for evaluating risk factors in risk assessments and has applied this in manufacture and service industries. Results: To verify the validity of the developed program, risk assessment has been performed on restaurant chefs as an example. For quantitative evaluation, the study has suggested approaches using the results for REBA evaluation and the analysis report on the work scenes of a fitting-shop in a shipbuilding industry. Application: Constructing and adapting a system using Excel in evaluating risk factors for risk assessments as this study suggests, is expected to contribute to revitalizing risk assessments.