• Food Science and Preservation
• /
• v.24 no.1
• /
• pp.84-92
• /
• 2017

Chicken breast jerky (CJ) was prepared by drying chicken breast at $50^{\circ}C$ for 9 hrs after marinating it in a various sweetening sauce including white sugar (WS), brown sugar (BS), rice syrup (RS), fructooligosaccharide (FO), pineapple concentrate (PC), Rubus coreanus extract (RCE), or honey (H), and its physicochemical and sensory properties were investigated. The CJ was found to contain 22.5-25.0% moisture, 41.0-46.6% protein, and 0.4-1.0% fat, which indicates that it could serve as a high-protein and low-fat snack. The type of sweeteners significantly affected the yield, pH, total viable cell count, and water activity of the CJ, showing ranges of 40.9-50.1%, 5.2-5.9, $2.5-6.2{\times}10^4CFU/g$, and 0.74-0.81, respectively. Both the water activity and pH were the lowest in CJ-RCE where of the highest in CJ-WS. The cohesiveness, springiness, and chewiness of the CJ significantly differed depending on the type of sweeteners (p<0.05). CJ-RCE showed the best taste and overall acceptability in a sensory test. After storage at $50^{\circ}C$ for 2 weeks, thiobarbituric acid reactive substance (TBARS) content (58.3 malondialdehyde (MDA) mg/kg) of CJ-RCE was much lower than those of control beef (75.6 MDA mg/kg) and pork jerky (98.0 MDA mg/kg), showing the good oxidative stability of CJ-RCE. Overall, marination in RCE sauce was suitable for the preparation of CJ with good quality in terms of its water activity, fat and protein contents, sensory property and oxidative stability.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.3
• /
• pp.327-332
• /
• 2012

In other to promote the utilization of native Gwangyang Rubus coreanus Miq. as an antioxidant material in functional food, its general composition, free sugars, vitamin C, vitamin E, and anthocyanin content were examined. Free sugars were mainly $2.83{\pm}0.01%$ glucose and $3.49{\pm}0.17%$ fructose. Native Gwangyang Rubus coreanus Miq. included higher vitamin C (0.04 g/100 g) and E (0.04 g/100 g) contents than other Rubus coreanus Miq. Anthocyanin was detected to be 2.41 g/100 g. Two extracts from native Gwangyang Rubus coreanus Miq., hot water extract (RCW) and 80% ethanol extract (RCE), were prepared by reflux, filter, and freeze-dry. The phenolic compound levels of RCW and RCE were 5.99% and 6.20%, respectively. In DPPH- and ABTS-radical scavenging activities, and lipid peroxidation formation inhibitory activity, RCE exhibited relatively high activities when compared to RCW (89.29% vs. 65.04%, 47.65% vs. 30.22%, 23.27% vs. 3.6%, respectively). Based upon these results, it is suggested that RCE from native Gwangyang Rubus coreanus Miq. possesses the antioxidant potentials for radical scavenging and anti-lipid peroxidation activities.

• Proceedings of the Korean Society of Life Science Conference
• /
• 2005.04a
• /
• pp.225-225
• /
• 2005

• Proceedings of the Korean Society of Life Science Conference
• /
• 2005.04a
• /
• pp.224-224
• /
• 2005

• Progress in Superconductivity and Cryogenics
• /
• v.16 no.4
• /
• pp.49-52
• /
• 2014

REBCO coated conductor (CC) tapes with superior mechanical and electromechanical properties are preferable in applications such as superconducting coils and magnets. The CC tapes should withstand factors that can affect their performance during fabrication and operation of its applications. In coil applications, CC tapes experience different mechanical constraints such as tensile or compressive stresses. Recently, the critical current ($I_c$) degradation of CC tapes used in coil applications due to delamination were already reported. Thermal cycling, coefficient of thermal expansion mismatch among constituent layers, screening current, etc. can induce excessive transverse tensile stresses that might lead to the degradation of $I_c$ in the CC tapes. Also, CC tapes might be subjected to very high magnetic fields that induce strong Lorentz force which possibly affects its performance in coil applications. Hence, investigation on the delamination mechanism of the CC tapes is very important in coiling, cooling, operation and design of prospect applications. In this study, the electromechanical properties of REBCO CC tapes fabricated by reactive co-evaporation by deposition and reaction (RCE-DR) under transversely applied loading were investigated. Delamination strength of the CC tape was determined using the anvil test. The $I_c$ degraded earlier under transverse tensile stress as compared to that under compressive one.

• Progress in Superconductivity and Cryogenics
• /
• v.24 no.1
• /
• pp.13-17
• /
• 2022

The mechanical properties of REBCO coated conductor (CC) tapes under uniaxial tension are mainly determined by the thick layer Components like the substrate and the stabilizer. Depending on the applications of the CC tapes, it is also needed to externally reinforce thin metallic foils to one side or both sides of the CC tapes. This study investigated the effect of additional stabilizer layers or lamination on the electrical resistivity and electromechanical properties in RCE-DR processed GdBCO CC tapes with different structures. The strain/stress tolerance of I_c in differently processed 12 mm-wide REBCO CC tapes under uniaxial tension at 77 K and self-field could be determined by the loading-unloading scheme. As a result, Sn-Cu stabilized CC tape showed a significant decrease in mechanical properties due to its soft but thick stabilizing layer. However, similar electromechanical properties have been observed on both Sn-Cu and Sn-stabilized CC tapes, the I_c degradation behavior was independent of whether the CC tape has an external reinforcement or different stabilizing layers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.93-102
• /
• 2020

The design of large complex mechanical systems, such as automobile, aircraft, and ship, is a kind of Multidisciplinary Design Optimization (MDO) because it requires both experience and expertise in many areas. With the rapid development of technology and the demand to improve human convenience, the complexity of these systems is increasing further. The design of such a complex system requires an integrated system design, i.e., MDO, which can fuse not only domain-specific knowledge but also knowledge, experience, and perspectives in various fields. In the past, the MDO relied heavily on the designer's intuition and experience, making it less efficient in terms of accuracy and time efficiency. Process integration and the design optimization framework mainly support MDO owing to the evolution of IT technology. This paper examined the procedure and methods to implement an efficient MDO with reasonable effort and time using RCE, an open-source PIDO framework. As a benchmarking example, the authors applied the proposed MDO methodology to a bulk carrier's conceptual design synthesis model. The validity of this proposed MDO methodology was determined by visual analysis of the Pareto optimal solutions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.1C
• /
• pp.1-8
• /
• 2003

In this paper, performance of the CPC(complex phase code) which is recently proposed as a practical phase encoding method for phase-code multiplexes holographic memory system is comparatively analyzed with those of the conventional phase codes such as PR(pure random code), RCE(random code with equality), WHM(Walsh Hadamard Matrix). In computer simulation, the size of an address bean is fixed at 32$\times$32 pixels and 0%-25% phase-error ratio in a pixel are intentionally added to the real phase values to consider the nonlinear phase-modulation characteristics of the practical spatial light modulator. From comparative analysis of crosstalks and signal-to-noise ratios for these phase codes by calculating auto-correlation and cross-correlation, it is found that the CPC have the lowest cross-correlation mean value of 0.021, the lowest standard deviation of 0.0113 and the highest signal-to-noise ratio(SNR) of 27.4 among the four types of phase code. In addition, from the calculation of the number of all possible address beams for these four types of phase code as the size of the address beam is fixed to 3232 pixels, the CPC is found to have 6.334$\times$10$^{49}$ address beams, which are relatively higher number than that of the conventional phase codes.

• Journal of the Korean Geophysical Society
• /
• v.9 no.1
• /
• pp.27-36
• /
• 2006

The radiative convective equilibrium (RCE) temperature was calculated for the climate change study at King Sejong Station in West Antarctica. As a result of RCE model sensitivity test, the increases of surface albedo, solar zenith angle, and cloud optical thickness decrease surface temperature. On the other hand, the increases of carbon dioxide and cirrus cloud amount are caused by surface warming due to the greenhouse effect. According to the model calculation result, annual mean surface temperature shows a upward trend of 0.012oC/year during the period of 1958-2001. During the period of 1989∼2001, the trend of monthly mean surface temperature by model calculation is 0.01oC/month and the observation trend is 0.005oC/month.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.269-272
• /
• 2007

In order to expand cell coverage, increase system capacity, and offer various multimedia service with high throughput in indoor environment, WiBro Access Point(AP) is developed. Home AP is IFA/Omni type and has stack-up structure of channel card and RF board. SOHO AP is designed to support up to 2FA and has remote RF(RRF) structure using UTP method. Inter-operational test with mobile terminal were completed for 3 terminals using web browsing service simultaneously. The performance test results of WiBro AP are as follows: RCE(EVM) value is -34.431 dB for 64-QAM and throughput is up to 6.79 Mbps(DL) and 1.1 Mbps(UL) with 2.5m Line-of-Sight(LOS) condition.