• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.589-592
• /
• 2000

자동차 man-machine system의 interface를 이루는 Display panel, Center fascia, Steering wheel, Rear view, Gear, Power window switch, Seat 등과 이들의 Layout은 운전자의 안전뿐만 아니라, 안락감과 밀접한 부분으로 알려져 있다. 따라서 이러한 설계요소들의 Man-machine interface의 최적화를 위한 인간공학적 접근이 필요하다. 운전자의 안락감은 Seat, Pedal, Steering wheel 등 뿐만 아니라 각종 조작장치(Audio, Switch, Gear,…)도 함께 연구되어야 하다. 따라서, 본 연구에서는 실험용 Seating buck을 제작하여 실내 조작장치 중 오디오를 대상으로 터치스크린과 Rapid Prototype을 이용해 사용성 평가에 대한 적합성을 검증하고자 하였다. Rapid Prototyping 기법은 디자인단계에서 제품 사용상의 문제점을 발견 개선할 수 있다는 장점이 있다. 그러나, 본 연구 결과에서 3가지 항목 중 1가지만이 실제 Audio와 Prototype에서 차이가 없었다. 따라서, Prototype의 접촉감과 입체감의 개선, 실사용과 동일한 환경의 제시, 소리와 같은 정확한 반응의 제시, Glare의 제거, 사용자 분석에 따른 실험 데이터의 축적 등을 고려하여 Rapid Prototyping을 구현하여야 할 것이다.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1081-1084
• /
• 1987

The Rapid transform is used in the recognition of Korean (Consonant) characters. The test pattern is represented by two gray levels (0 and 1). A 2-dimensinal rapid transform of the test pattern is computed. Feature selection is carried out in the Rapid transform domain. These features are used with the corresponding features of the template patterns in features of the template patterns in computing the Euclidian distance function and the decision is made based on the minimum distance criterion. Experimental results show that recognition rate is 94%.

• Korean Journal of Remote Sensing
• /
• v.33 no.1
• /
• pp.79-88
• /
• 2017

The RapidEye satellite sensor has various spectral wavelength bands, and it can capture large areas with high temporal resolution. Therefore, it affords advantages in generating various types of thematic maps, including land cover maps. In this study, we applied a supervised classification scheme to generate high-resolution land cover maps using RapidEye images. To improve the classification accuracy, object-based classification was performed by adding brightness, yellowness, and greenness bands by Tasseled Cap Transformation (TCT) and Normalized Difference Water Index (NDWI) bands. It was experimentally confirmed that the classification results obtained by adding TCT and NDWI bands as input data showed high classification accuracy compared with the land cover map generated using the original RapidEye images.

• Transactions of Materials Processing
• /
• v.10 no.6
• /
• pp.500-508
• /
• 2001

The integration of Rapid prototyping (RP) and Rapid Tooling (RT) has the potential for rapid net shaping of thee-dimensional parts, which have a geometrical complexity. In this study, a new R)P process, (VLM-SP), was proposed to manufacture net shapes of three-dimensional prototypes and it was shown that VLM-SP is an effective and economic process through the comparison of building time, building cost and dimensional accuracy for the test parts with the commercial RP processes ; LOM and FDM. In addition, the metal parts, which are a spanner shape and a clover punch, were produced by the plaster casting as one of RT using the prototypes of VLM-SP.

• International Journal of Precision Engineering and Manufacturing
• /
• v.7 no.3
• /
• pp.56-59
• /
• 2006

UV laser micromachining is generally used to create microstructures for micro-products through a sequence of lithography-based photo-patterning steps. However, the micromachining process is not suitable for rapid realization of complex 3D micro-products because it depends on worker experience. In addition, the cost and time required to make many masks are excessive. In this paper, a more effective and rapid micro-manufacturing process, which was developed based on laser micromachining, is proposed for fabricating micro-products directly using UV laser ablation and phase-change filling. The filling process is useful for holding the micro-products during the ablation step. The proposed rapid micro-manufacturing process was demonstrated experimentally by fabricating 3D micro-products from functional UV-sensitive polymers using 3D CAD data.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.101-104
• /
• 1997

The purpose of this study is the development of the extensive Rapid Prototyping Technique, which can resolve the long-term manufacturing process, shrinkage and deformation occurring rapid prototyping technique. To begin with, the various specimens for tensile and bending test were manufactured on the basis of this modeling technology. Then, many kinds of the laminate pieces for the test were made by using the sheet steels 1 mm and 2 mm thickness which is composed of the same ingredient. Not only the mechanical strength of the both of the laminate specimens by the developed Rapid Prototyping using projection welding and non-laminate specimens of 5 mm thickness were evaluated, but the mechanical strength of the specimens of the tensile and bending test composed of heterogeneous components were also estimated.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.26-29
• /
• 2003

UV laser micromachining are generally used to create microstructures for micro product through a sequence of lithography-based photopatterning steps. However, the micromachining process is not suitable for the rapid realization of complex microscale 3D product because it depends on worker experiences, excessive cost and time to make many masks. In this paper, the more effective micro rapid manufacturing process, which is developed upon the base of laser micromachining. is proposed to fabricate micro products directly using UV laser ablation and phase change filling. The filling process is useful to hold the micro product during the next ablation step. The proposed micro rapid manufacturing process is also proven experimentally that enables to fabricate the 3D microscale products of UV sensitive polymer from 3D CAD data to functional micro parts.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.42-45
• /
• 2003

The purpose of this study is the development or the extensive Rapid Prototyping Technique. which can resolve the long-term manufacturing process, shrinkage and deformation occurring rapid prototyping technique. To begin with. the various specimens for tensile were manufactured on the basis of this modeling technology. Then, many kinds of the laminate pieces for the test were made by using the sheet metals lmm and 1.5mm thickness which is composed of the same ingredient. The tensile specimen were manufactured by changing the process variables, Such as electric current, pressure and resistance welding time for the Rapid Prototyping with metal sheet. And then by using the Taguchi method. The interrelation between the specimen and mechanical properties were determined and the system for the optimum process variable organized.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.04a
• /
• pp.428-432
• /
• 2003

The technical combination of RP and RT has a potential for rapid manufacturing of three-dimensional parts. In the present work a new RP system, $VLM-_{ST}$, is proposed to manufacture net shapes of 3D prototypes. ㅁ human head shape and a kob shape are manufactured by the $VLM-_{ST}$ apparatus. In addition, a new RT technology, which utilizes a RTV molding technique and a triple reverse process technique, is proposed to manufacture net shapes of 3D plastic parts using prototypes of $VLM-_{ST}$. A plastic part of the knob shape os produced by the proposed RT technology. The combination of the proposed RP and RT enables the manufacturing of a plastic knob within two days.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.11 s.176
• /
• pp.196-201
• /
• 2005

UV laser micromachining are generally used to create microstructures for micro product through a sequence of lithography-based photopatterning steps. However, the micromachining process is not suitable for the rapid realization of complex 3D micro product because it depends on worker experiences, excessive cost and time to make many masks. In this paper, the more effective micro rapid manufacturing process, which is developed upon the base of laser micromachining, is proposed to fabricate micro products directly using UV laser ablation and phase change filling. The filling process is useful to hold the micro product during the next ablation step. The proposed micro rapid manufacturing process is also proven experimentally that enables to fabricate the 3D micro products of UV sensitive polymer from 3D CAD data to functional micro parts.