• 제목/요약/키워드: RANS method

검색결과 210건 처리시간 0.025초

채널난류유동에 대한 하이브리드 RANS/LES 방법 (Hybrid RANS/LES Method for Turbulent Channel Flow)

  • 명현국
    • 대한기계학회논문집B
    • /
    • 제26권8호
    • /
    • pp.1088-1094
    • /
    • 2002
  • A channel flow with a high Reynolds number but coarse grids is numerically studied to investigate the prediction possibility of its turbulence which is three-dimensional and time-dependent. In the present paper, a Reynolds-Averaged Navier-Stokes (RANS) model, a Large Eddy Simulation (LES) and a Navier-Stokes equation with no model are tested with a new approach of hybrid RANS/LES, which reduces to RANS model in the boundary layers and at separation, and to Smagorinsky-like LES downstream of separation, and then compared with each other. It is found that the simulations of hybrid RANS/LES method sustain turbulence like those of LES and with no model, and the results are stable and fairly accurate. This indicates strongly that gradual improvements could lead to a simple, stable, and accurate approach to predict turbulence phenomena of wall-bounded flow.

A BEM/RANS interactive method for predicting contra-rotating propeller performance

  • Su, Yiran;Kinnas, Spyros A.
    • Ocean Systems Engineering
    • /
    • 제7권4호
    • /
    • pp.329-344
    • /
    • 2017
  • This paper introduces a BEM/RANS interactive scheme to predict the contra-rotating propeller (CRP) performance. In this scheme, the forward propeller and the aft propeller are handled by two separate BEM models while the interactions between them are achieved by coupling them with a RANS solver. By using the body force field and mass source field to represent the propeller in the RANS model, the number of RANS cells and the number of required RANS iterations reduce significantly. The method provides an efficient way to predict the effective wake, the steady/unsteady propeller forces, etc. The BEM/RANS interactive scheme is first applied to a CRP in both an axisymmetric manner and a non-axisymmetric manner. Results are shown in good agreement with the experimental data in moderate to high advance ratios. It is proved that the difference between the axisymmetric scheme and the non-axisymmetric scheme mainly comes from the non-axisymmetric bodies. It is also found that the error is larger at lower advance ratios. Possible explanations are given. Finally, some additional cases are tested which justifies that the non-axisymmetric BEM/RANS scheme is able to handle a podded CRP working at given inclination angles.

Zonal Hybrid RANS/LES를 이용한 크랙된 케로신 스크램제트 연소기의 비예혼합 난류 연소 연구 (Numerical Investigation of Nonpremixed Turbulent Flame of Cracked Kerosene in a Model Scramjet Combustor using Zonal Hybrid RANS/LES Method)

  • 신준수;성홍계
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2017년도 제48회 춘계학술대회논문집
    • /
    • pp.304-309
    • /
    • 2017
  • 본 연구에서는 zonal hybrid RANS/LES 기법을 사용하여 모델 스크램제트 연소기 내에서의 비예혼합 연소 현상에 대한 연구를 수행하였다. 수치 계산을 위한 도메인은 RANS와 LES 영역으로 나누어져 있으며, 이 두 개 영역의 계면은 synthetic eddy method로 처리되었다. 본 연구에서는 독일 항공우주센터에서 실험한 모델 스크램제트 연소기가 사용되었다. 수소 연료를 사용한 실험 결과와 수치해석적 검증을 수행하였다. 크랙된 케로신 연료는 에틸렌과 메탄으로 구성되었으며, 크랙된 케로신 surrogate의 난류연소는 화염편 모델을 사용하여 모사되었다.

  • PDF

RANS 방정식의 운동량 원천항을 이용한 내부조파 (Internal Wave-Maker using Momentum Source Term of RANS Equation Model)

  • 최준우;고광오;윤성범
    • 한국해안·해양공학회논문집
    • /
    • 제21권2호
    • /
    • pp.182-190
    • /
    • 2009
  • Lin and Liu(1999)는 VOF기법을 도입한 RANS 방정식 모형을 이용하여 목표 파형을 조파할 수 있도록 연속방정식의 질량 원천항을 이용하는 내부조파기법을 제안하였다. 이로부터 외부조파에 의한 영역 내 재반사 문제가 해결되어 RANS 방정식 모형을 이용한 파랑수치실험이 수행되어 발표되어 왔다. 본 연구에서는 RANS 방정식 모형의 운동량 원천항을 이용한 내부조파기법을 사용하여 목표 파형을 조파할 수 있도록 하였다. FLUENT의 사용자 정의함수를 이용하여 두 조파방법에 대해 수치실험하고 비교하였다. 그리고 조파기법의 적용성을 살펴 보기 위해 Luth et al.(1994)의 수리실험을 수치모의하고 그 결과를 비교하였으며, 수심방향 변화를 보이는 수치 모의 결과들을 제시하고 고찰하였다.

혼합 영역 RANS-LES를 이용한 톱니 뒷전 유동 및 소음장의 계산 (Computation of Serrated Trailing Edge Flow and Noise Using a Hybrid Zonal RANS-LES)

  • 김태형;이승훈;이수갑
    • 한국소음진동공학회논문집
    • /
    • 제22권5호
    • /
    • pp.444-450
    • /
    • 2012
  • The evaluation of a zonal RANS-LES approach is documented for the prediction of broadband noise generated by the flow past unmodified and serrated airfoil trailing edges at a high Reynolds number. A multi-domain decomposition is considered, where the acoustic sources are resolved with a LES sub-domain embedded in the RANS domain. A stochastic vortex method is used to generate synthetic turbulent perturbations at the RANS-LES interface. The simulations are performed with a general-purpose unstructured control-volume code FLUENT. The far-field noise is calculated using the aeroacoustic analogy of Ffowcs Williams-Hawkings. The results of the simulation are validated through the full-scaled wind turbine acoustic measurements. It is found that the present approach is adequate for predicting noise radiation of serrated trailing edge flow for low noise rotor system.

터널화재유동의 역기류 해석을 위한 LES 및 RANS 결과의 비교 고찰 (Comparative Study on The Numerical Simulation for The Back-Layer of The Tunnel Fire-Driven Flow with LES and RANS)

  • 장용준;김학범;김진호;한석윤
    • 대한기계학회논문집B
    • /
    • 제33권3호
    • /
    • pp.156-163
    • /
    • 2009
  • In this study, comparative analysis on the back-layer phenomena in the tunnel-fire driven flow is performed using numerical simulation with LES and RANS. FDS(Fire Dynamics Simulator) code is employed to calculate the fire-driven turbulent flow for LES and Smartfire code is used for RANS. Hwang and Wargo's data of scaling tunnel fire experiment are employed to compare with the present numerical simulation. The modeled tunnel is 5.4m(L) ${\times}$ 0.4m(W) ${\times}$ 0.3m(H). Heat Release Rate (HRR) of fire is 3.3kW and ventilation-velocity is 0.33m/s in the main stream. The various grid-distributions are systematically tested with FDS code to analyze the effects of grid size. The LES method with FDS provides an improved back-layer flow behavior in comparison with the RANS (${\kappa}-{\epsilon}$) method by Smartfire. The FDS solvers, however, overpredict the velocity in the center region of flow which is caused by the defects in the tunnel-entrance turbulence strength and in the near-wall turbulent flow in FDS code.

Large Amplitude Heave and Roll Simulations by the Chimera RANS Method

  • Kang, Chang-Ho
    • International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
    • /
    • 제4권1호
    • /
    • pp.1-9
    • /
    • 2001
  • An oscillating body motion with extremely large amplitude has been studied using the viscous flow solver. Time simulations of oscillating ship hull in prescribed heave and roll motions are presented using RANS method with FAM approach (Chen, 1995). For viscous flows, laminar flow and turbulent flow with $textsc{k}$-$\varepsilon$ model are considered and compared. The viscous flow solver of RANS method is performed together with a Chimera type of multi-block grid system to demonstrate the advantage of accurate and efficient zonal approach. In the present study, effects of viscosity and oscillation degree are discussed using Re=1000 and Re=1000000. Large motion of oscillating body shows clear vortex propagation that is not possible for inviscid flow to present.

  • PDF

Computation of serrated trailing edge flow and noise using a hybrid zonal RANS-LES

  • 김태형;이승훈;이수갑
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2012년도 춘계학술대회 논문집
    • /
    • pp.414-419
    • /
    • 2012
  • The evaluation of a zonal RANS-LES approach is documented for the prediction of broadband noise generated by the flow past unmodified and serrated airfoil trailing edges at a high Reynolds number. A multi-domain decomposition is considered, where the acoustic sources are resolved with a LES sub-domain embedded in the RANS domain. A stochastic vortex method is used to generate synthetic turbulent perturbations at the RANS-LES interface. The simulations are performed with a general-purpose unstructured control-volume code FLUENT. The far-field noise is calculated using the aeroacoustic analogy of Ffowcs Williams-Hawkings. The results of the simulation are validated through the full-scaled wind turbine acoustic measurements. It is found that the present approach is adequate for predicting noise radiation of serrated trailing edge flow for low noise rotor system.

  • PDF

규칙파중 전진하는 선박의 유체역학적 응답에 대한 비정상 수치해석 (Unsteady RANS Analysis of the Hydrodynamic Response for a Ship with Forward Speed in Regular Wave)

  • 박일룡;김광수;김진;반석호
    • 대한조선학회논문집
    • /
    • 제45권1호
    • /
    • pp.29-41
    • /
    • 2008
  • The present paper provides a CFD analysis of diffraction problem for a ship with forward speed using an unsteady RANS simulation method, a WAVIS code. The WAVIS viscous solver adopting a finite volume method has second order accuracy in time and field discretizaions for the RANS equations. A two phase level-set method and a realizable ${\kappa}-{\varepsilon}$ turbulence model are adopted to compute the free surface and to meet the turbulence closure, respectively. To validate the capability of the present numerical methods for the simulation of an unsteady progressive regular wave, computations are performed for three grid sets with refinement ratio of ${\sqrt{2}}$. The main simulation is performed for a DTMB5512 model with a forward speed in a regular head sea condition. Validation of the present numerical method is carried out by comparing the present CFD results with available unsteady experimental data published in the 2005 Tokyo CFD Workshop: resistance, heave force, pitch moment, unsteady free surface elevations and velocity fields.

A numerical study on ship-ship interaction in shallow and restricted waterway

  • Lee, Sungwook
    • International Journal of Naval Architecture and Ocean Engineering
    • /
    • 제7권5호
    • /
    • pp.920-938
    • /
    • 2015
  • In the present study, a numerical prediction method on the hydrodynamic interaction force and moment between two ships in shallow and restricted waterway is presented. Especially, the present study proposes a methodology to overcome the limitation of the two dimensional perturbation method which is related to the moored-passing ship interaction. The validation study was performed and compared with the experiment, firstly. Afterward, in order to propose a methodology in terms with the moored-passing ship interaction, further studies were performed for the moored-passing ship case with a Reynolds Averaged Navier-Stokes (RANS) calculation which is using OpenFOAM with Arbitrary Coupled Mesh Interface (ACMI) technique and compared with the experiment result. Finally, the present study proposes a guide to apply the two dimensional perturbation method to the moored-passing ship interaction. In addition, it presents a possibility that the RANS calculation with ACMI can applied to the ship-ship interaction without using a overset moving grid technique.