• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.6
• /
• pp.752-759
• /
• 2014

Varieties of research on turbulent-induced noise is conducted with combinations of acoustic analogy methods and computational fluid dynamic methods to analyze efficiently and accurately. Application of FW-H acoustic analogy without turbulent noise is the most popular method due to its calculation cost. In this paper, turbulent-induced noise is predicted using RANS turbulence model and permeable FW-H method. For simplicity, noise from 2D cylinder is examined using three different methods, direct method of RANS, FW-H method without turbulent noise and permeable FW-H method which can take into account of turbulent-induced noise. Turbulent noise was well predicted using permeable FW-H method with same computational cost of original FW-H method. Also, ability of permeable FW-H method to predict highly accurate turbulent-induced noise by applying adequate permeable surface is presented. The procedure to predict turbulent-induced noise using permeable FW-H is established and its usability is shown.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.11
• /
• pp.917-926
• /
• 2012

The analysis of aerodynamic characteristics for aircraft propellers is studied to develop high efficiency composite propellers. It is to verify the accuracy and reliability of predicting the efficiency characteristics of aircraft propellers by applying nonlinear numerical analysis. The numerical simulation method incorporated the CFD code, which is based on RANS (Reynolds Averaged Navier-Stocks) equation. The study includes a comparative analysis between the numerical simulation results and the wind tunnel test results of the full-scale aircraft propeller. The comparison shows that thrust and power coefficients of the propeller calculated by nonlinear numerical analysis are higher than those based on the results generated from the wind tunnel test. The efficiency of the propeller calculated by numerical analysis matches closely to the efficiency based on the wind tunnel test results. The verification results are analyzed, then, will be used in optimizing the design and manufacture of the subject aircraft propeller studied.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.6
• /
• pp.466-473
• /
• 2011

The buoyancy and initial momentum fluxes make near-field dominated by buoyant jet when thermal discharge releases underwater. In order to estimate prediction capabilities of those near-field phenomena, non-hydrostatic RANS applied CFD(Computational Fluid Dynamic) model was used. Condition of model was composed based on past laboratory experiments. Numerical simulations carried out for the horizontal buoyant jet in the stagnant flow and vertical buoyant jet into crossflow. The results of simulation are compared with the terms of trajectory and dilution rate of laboratory experiments and analytic model(CorJET) results. CFD model showed a good agreement with them. CFD model can be appropriate for assessment of submerged thermal discharge effect because CFD model can resolve the limitations of near-field analytic model and far-field quasi 3D hydrodynamic model. The accuracy and capability of the CFD model is reviewed in this study. If the computational efficiency get improved, CFD model can be widely applied for simulation of transport and diffusion of submerged thermal discharge.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.127-127
• /
• 2023

지표수와 하상 경계층에서 발생하는 흐름 교환은 하천, 호소, 연안, 해안 등 자연계에 존재하는 수환경시스템에서 일반적으로 나타나는 수리학적 특성으로서, 흐름 교환이 발생하는 경계층 아래 하상층 영역을 혼합대(hyporheic zone)라 부른다. 수질오염사고 등에 의해 외부의 오염물질이 하천 내 유입될 경우, 혼합대 흐름에 의해 하상층으로 침투되고 지표수 대비 유속이 느린 하상 내 공극 흐름에 의해 거동함에 따라 이들의 하천 내 체류시간이 증가하게 된다. 따라서, 본 연구에서는 지표수와 하상 흐름을 연계한 수치해석 방법을 적용하여 혼합대가 지표수 내 용질 체류시간에 미치는 영향을 분석하였다. 먼저 연직 2차원 Reynolds 평균 Navier-Stokes(RANS) 방정식과 Darcy 방정식을 연계하여 지표수와 하상 내 흐름을 해석하였다. 지표수 영역은 RANS 방정식을 이용하여 모의하였고, 지표수 흐름해석에서 얻어진 하상의 압력장을 경계조건으로 하여 Darcy 방정식과 함께 하상 내 흐름을 모의하였다. 여기서 하상의 형태는 자연계 하천에서 일반적으로 관찰되는 사련하상(Ripple bed)으로 모사하였다. 이후, 지표수-하상 연계모의를 통해 얻어진 흐름 결과를 바탕으로 지표수-하상 경계층에서 용질거동을 모의하였다. 흐름 모의결과를 과거 실험자료와 비교한 결과, 지표수 영역 내연직흐름 분포를 정확하게 재현하였고, 동시에 혼합대 흐름 구조에 큰 영향을 미치는 지표수-하상 경계층 압력 분포 역시 관측값과 유사하게 나타났다. 용질거동 해석을 통해 얻어진 용질의 체류시간을 분석한 결과, 혼합대 흐름이 고려된 경우(투수성 하상)와 고려되지 않은 경우(불투수성 하상)를 비교했을 때 전자에서 체류시간 분포의 감수곡선이 길어지고 첨두농도가 감소하는 것으로 나타났다. 아울러, 지표수 영역의 유입부 경계의 평균 유속이 증가함에 따라 최대 체류시간이 감소하는 것으로 나타났는데, 이는 지표수-하상 경계층에서의 압력 경사가 커져 혼합대 내 유속이 증가함에 기인하는 것으로 분석되었다.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.6
• /
• pp.391-398
• /
• 2012

In this paper, prediction of centrifugal fan was conducted through combination the hybrid CAA method which was used to predict the fan noise with the FRPM technique which was used to generate the broadband noise source. Firstly, flow field surround the centrifugal fan was computed using the RANS equations and noise source region was deducted from the computed flow field. Then the FRPM technique was applied to the source region for generation of turbulence which satisfies the stochastic features. The noise source of the centrifugal fan was modeled by applying the acoustic analogy to the synthesized flow field from the computed and generated flow fields. Finally, the broadband noise of the centrifugal fan was predicted through combination the modeled noise source with the linear propagation which was realized using the boundary element method. It was confirmed that the proposed technique is efficient to predict the tonal and broadband noises of centrifugal fan through comparison with the measured data.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.1
• /
• pp.23-28
• /
• 2012

In the present work, numerical analyses of air flow in HVAC duct have been carried out for enhancement of cooling/heating performance. For the analyses, three-dimensional Reynolds-averaged Navier-Stokes equations have been solved with the shear stress transport turbulence model. The numerical results were validated in comparison with the experimental data. Based on the numerical results, the HVAC duct was designed to reduce the pressure loss. The modified duct geometry shows largely reduced pressure drop in comparison with the reference geometry. And, through modified duct shape, the performance of air conditioning has been enhanced.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.5
• /
• pp.385-393
• /
• 2018

In this study, the analysis of 2DOF (2 Degree Of Freedom) motion and added resistance of a ship in regular head waves is carried out using RANS (Reynolds Averaged Navier-Stokes) approach. In order to improve the accuracy for large amplitude motions, the dynamic overset scheme is adopted. One of the dynamic overset schemes, Suggar++ is applied to WAVIS which is the in-house RANS code of KRISO (Korea Research Institute of Ships and Ocean Engineering). The grid convergence test is carried out using the present scheme before the analysis. The target hull form is KRISO VLCC tanker (KVLCC2) and 13 wave length conditions are applied. The present scheme shows the improved results comparing with the results of WAVIS2 in the non-inertial reference frame. The dynamic overset scheme is confirmed to give the comparatively better results for the large amplitude motion cases than the non-inertial frame based scheme.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.331-334
• /
• 2011

The performance of ramjet engine is closely associated with a supersonic intake. In this study, experiments and computational simulations were conducted to observe the internal flow characteristics of the supersonic intake. The supersonic intake which have self-starting characteristics was designed and manufactured. The flow characteristics was analyzed from the experimental results using the supersonic wind tunnel testing and computational results using RANS equation and Menter's SST turbulence model. The detailed visualization results were suggested for the pseudo-shock wave of stable operations and for the inlet buzz phenomenon of unstable operations.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.4
• /
• pp.19-30
• /
• 2000

A finite-volume method is developed to solve turbulent flows around modern commercial hull forms with bow and stern bulbs. The RANS equations are solved. The cell-centered finite-volume method employs QUICK and central difference scheme for convective and diffusive flux discretization, respectively. The SIMPLEC method is adopted for the velocity-pressure coupling. The developed numerical methods are applied to calculate turbulent flow around KRISO 3600TEU container ship. Surface meshes are generated into five blocks: bow and stern bulbs, overhang, fore and afterbody. 3-D field grid system with O-H topology is generated using elliptic grid generation method. Surface friction lines and wake distribution at propeller plane is compared with experiment. The calculated results show that the present method can be used to predict flow around a modern commercial hull forms with bulbs.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.11a
• /
• pp.60-64
• /
• 2009

Laminar separation bubble and transitional flow over an airfoil are investigated at a moderate range of Reynolds numbers. In this research, a Reynolds-Averaged Navier-Stokes code is coupled with an empirical transition model that can predict transition onset points and the length of transition region. Without solving the boundary layer equations, approximated e-N method is directly applied to the RANS code and iteratively solved together. The computational results are compared with the experimental data for NACA0012 airfoil. Results of transition onset point and length are compared well with experimental and XFOIL prediction. In high angle of attack the present RANS results show better agreement than XFOIL results using the boundary layer equations.