• 한국대기환경학회지
• /
• 제22권1호
• /
• pp.73-84
• /
• 2006

Hazardous Air Pollutants (HAPs) are characterized by being relatively heavier and denser than that of ambient air due to the various reasons such as higher molecular weight, low temperature and other complicated chemical transformations (Witlox, 1994). In an effort to investigate transport and diffusion from instantaneous emission of heavy gas, Lagrangian Particle Dispersion Model (LPDM) coupled with the RAMS output was employed. Both deposition process and buoyancy term were added on the atmospheric diffusion equations of LPDM, and the locations and concentrations of dense gas particle released from instantaneous single point source (emitting initially for 10 minutes only) were analyzed. The result overall shows that adding deposition process and buoyancy terms on the diffusion equation of LPDM has very small but detectable effect on the vertical and horizontal distribution of Lagrangian particles that especially transported for a fairly long traveling time. Also the slumping of dense gas can be found to be ignored horizontally compared to the advection by the horizontal wind suggesting that it was essential to couple the Lagrangian particle dispersion model coupled with the RAMS model in order to explain the dispersion of HAPs more accurately. However, during the initial time of instantaneous emission, buoyancy term play an important role on the vertical locations of dense particles for near surface atmosphere and around source area, indicating the importance of densities of HAPs in the beginning stage or short duration for the risk assessment of HAPs or management of heavy vapors during the explosive accidents.

• 한국철도학회논문집
• /
• 제8권6호
• /
• pp.533-538
• /
• 2005

In this paper we identity the hazard using HAZOP study for ATSRX which is a subsystem of the ATP system, and we study a safety management method for the mitigation of the risk to the acceptable level. ATSRX is a device that make a train which has a ATP system operate in ATS line. For this ATSRX send a induction signal with ATS system to vehicle controller. Thus ATSRX can be said a safety equipment that makes a train operate safely. In order to identify the hazard for the internal faults in ATSRX system, we employ HAZOP study method which is recommended as hazard identification in IEC 62278, RAMS requirements in railway signal, and also it provide the detail activity in IEC 61882. Thus, in this paper we perform HAZOP study based on ATSRX related standards and using the assessment of the identified hazard we study a method to guarantee the system safety through the change of the design to mitigate the risk to the acceptable level.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2001년도 춘계학술대회
• /
• pp.149-160
• /
• 2001

시스템이 제공하는 서비스의 질, 정착성 및 연속성과 관련된 정서적 요소 신뢰도, 가용도, 보전도, 안전도를 종합적으로 관리하는 Dependability Management를 다루고 있는 국제표준 IEC 60300 Dependability Management의 Part 3-5(IEC 60300-3-5)： 신뢰성 시험조건 및 통계적 검정 원칙의 적용지침을 소개하였다. 표준의 적용범위 및 용어정의, 일반적인 고려사항, 신뢰성시험의 종류와 적용표준, 신뢰성 시험조건, 데이터 수집과 고장분류방법을 요약하였다.

• 한국철도학회논문집
• /
• 제8권3호
• /
• pp.286-292
• /
• 2005

In this paper, we introduce IEC 60300(Dependability program management) into urban transit system, and propose effective method to apply IEC 60300 to Subway Corporation. The dependability is the collective term used to describe the availability performance and its influencing factors such as reliability performance, maintainability performance and maintenance support performance. A dependability program covers all phases of a system's life cycle from planning to operation and possibly disposal, and is composed of program elements divided into tasks.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1126-1131
• /
• 2008

In this paper we introduce an applicable RCM(Reliability centered maintenance) method for Track circuit equipment of AREX's Signalling System. AREX computerize all the process of FRACAS(Failure Reporting, Analysis and Corrective Action System)) by the Facility Management System of Integrated Information System. These datum were analysed and reproduced as the RAMS index value which can be used by maintenance staff for optimizing the maintenance method of the System.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.27-37
• /
• 2011

Currently, in the course of introducing rolling stocks, RAMS standard and management by system engineering method apply to rolling stock system. Technical elements and results applied in system introduction phase are just used in acquisition stage, and these are not applied to the standard in railway site. Therefore, it is difficult to apply to standardized technology and quality assurance measure. Due to the establishment of the EU, railway operation system is internationalized and the international railway standards are being discussed in various ways. In addition, standardization is expanded from manufacture to operation and maintenance. It is to provide consistent standard in quality, cost calculation of maintenance technology, maintenance technology and quality assurance in case of international railway safety incidents. Therefore, this study is to find technology, quality and cost management model to be used for choosing railway-operation guidance by considering how technologies & quality have changed in system life cycle, compared with estimated standards, based on the technologies & quality-related result in the process of getting new rolling stocks and management guidance for operation & maintenance process.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2010년도 추계학술대회
• /
• pp.651-668
• /
• 2010

철도 시스템은 차량, 전력, 신호, 선로구축물시스템이 유기적으로 결합된 복합시스템으로 사고 발생 시 원인규명이 어렵고 인명에 치명적인 결과를 초래하게 되며 사소한 고장이라도 열차지연에 미치는 파급효과는 지대하여 시스템의 신뢰성확보가 매우 중요하다[26]. 실제로 세계 각국의 철도산업은 시스템의 신뢰성 향상을 위해 신뢰성 기법에 기반을 둔 다양한 이론을 통해 신뢰성 향상과 안전성 향상에 최선을 다하고 있다. 본 연구에서는 철도 신뢰성관리와 관련된 국내 연구동향과 철도 운영기관 및 기업에서 적용하고 있는 신뢰성 적용 현황을 분석한다. 그리고 국외 연구 동향과 주요 적용 현황을 정리한다. 또한 철도 신뢰성과 관련된 국내외 규격을 조사하고 이들 규격의 내용을 분석한 후 국내 적용방향을 제시한다.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 1993년도 추계학술대회발표논문집; 서강대학교, 서울; 25 Sep. 1993
• /
• pp.51-58
• /
• 1993

현대 사회가 점점 복잡한 정보화 사회로 변해감에 따라 개인의 자료 또한 기존의 방법으로는 효율적인 관리가 어렵게 되었다. 이러한 상황속에서 연구소 및 대학 연구원들의 늘어나는 연구실적을 효율적으로 관리하기 위하여 본 논문에서는 연구원들의 연구실적을 컴퓨터에 저장하여 효율적으로 관리할 수 있는 연구실적관리시스템(RAMS : Research Accomplishment Management System)을 설계, 구현하였다. 본 시스템은 연구실적을 효율적으로 관리할 수 있도록 각 연구실적에 관한 원시자료만을 입력시킨 후 이를 이용하여 원하는 내용의 연구실적을 조회하고, 각 연구실적별 내용을 원하는 양식에 맞게 출력을 할 수 있게 해주었으며 또한 개인별 실적관리 뿐만 아니라 소규모 집단(연구소)에서의 개인별 관리를 용이하게 하기 위하여 개인화일을 코드화해서 관리해주는 기능을 가지도록 하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.819-825
• /
• 2004

The maintenance CALS system for car of urban transit is a part of standardization and development of urban transit system, and We have been performed the establishment of maintenance CALS system from 2001 to 2005. These 2D and 3D configuration management system are utilized in a variety of CALS system for user's convenience and safety in maintenance. In this paper, the 2D and 3D configuration system will be discussed for necessity and possibility. This system include RAMS(reliability, availability, maintainability and safety) of the vehicles shall be enhanced in the future.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제13권4호
• /
• pp.287-298
• /
• 2013

This paper presents a case study of PSD(Platform Screen Door) system assurance based on EN50126 life-cycle stage. By applying this system assurance, the accidents related to urban light transit railway especially that caused casualties could be reduced tremendously. This case study contributes significantly to the reliability, availability, maintainability and safety of the PSD system. Request For Proposal (RFP) of a rail road operator in which required by RAMS is prepared in which to ensure all system assurance activity and safety assessment are compulsory. The step-by-step activities and related deliverables are used which include functional analysis, FMECA, hazard identification analysis, system hazard analysis, maintainability analysis, FRACAS, and finally verification and validation of the system.