• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.993-999
• /
• 2007

With the introduction of the RAMS(Reliability, Availability, Maintainability, Safety), the interest of the system assurance has been increased. First of all, fast-growing electronic circuit requires analyzing the failure rates, by dividing the signalling system more specifically. Since 2005, the K.N.R (Korean National Railway) has incorporated ERP(Enterprise Resource Planning) in order to establish the complete status as the top international comprise, therefore while ordering the project, it has established the classification system and then has been applying to ERP system in 2007. Due to the complex of the classification system, the reliability analysis of the signalling system was assessed with the limit of IXL ATP with On-board and wayside equipment. This paper assumed MTBF(Mean Time Between Failure), MTTR((Mean Time Between Repair) of total signalling system, by using the classification of ERP program.

• 한국철도학회논문집
• /
• 제8권6호
• /
• pp.533-538
• /
• 2005

In this paper we identity the hazard using HAZOP study for ATSRX which is a subsystem of the ATP system, and we study a safety management method for the mitigation of the risk to the acceptable level. ATSRX is a device that make a train which has a ATP system operate in ATS line. For this ATSRX send a induction signal with ATS system to vehicle controller. Thus ATSRX can be said a safety equipment that makes a train operate safely. In order to identify the hazard for the internal faults in ATSRX system, we employ HAZOP study method which is recommended as hazard identification in IEC 62278, RAMS requirements in railway signal, and also it provide the detail activity in IEC 61882. Thus, in this paper we perform HAZOP study based on ATSRX related standards and using the assessment of the identified hazard we study a method to guarantee the system safety through the change of the design to mitigate the risk to the acceptable level.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1403-1407
• /
• 2007

The bogie of Rolling Stock is the basic rolling component. It operates the train body, guides the body considering various tracks and offers comfort to passengers. We can verify the safety level of bogie about all factors through the first -grade scenario of Preliminary Hazard Analysis, but especially the horizontal acceleration sensor, equipped in each power bogie and trailer bogie, is the device, which makes it possible to test bogie instability and uncomfortable body movements by the method, similar to actual train driving, and in this context the necessity of this device becomes important. This paper would classify the main functions of driving sub system and examine the reliability, availability, maintainability and safety, which are main factors of RAMS. Especially, we would realize the bogie instability sensor with a simulator and offer the content in analyzing the data by the statistical method, which are obtained through the connected test with OBCS.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1653-1656
• /
• 2005

Korea Railroad Research Institute(KRRI) has developed the rubber-tired AGT system from 1999 to 2005. The rubber-tired AGT system is now on test for its performance and function at the test line in Gyeong-San. This paper is concerned with the recent development of the AGT system and its reliability evaluation technology which are now being applied in test line. Also, we made the reliable program to assure required the RAMS((reliability, availability, maintainability & safety) of the AGT system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.819-825
• /
• 2004

The maintenance CALS system for car of urban transit is a part of standardization and development of urban transit system, and We have been performed the establishment of maintenance CALS system from 2001 to 2005. These 2D and 3D configuration management system are utilized in a variety of CALS system for user's convenience and safety in maintenance. In this paper, the 2D and 3D configuration system will be discussed for necessity and possibility. This system include RAMS(reliability, availability, maintainability and safety) of the vehicles shall be enhanced in the future.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.238-243
• /
• 2002

The maintenance CALS system for car of urban transit is a part of standardization and development of urban transit system, and We have been performed the establishment of maintenance CALS system from 2001 to 2005. These 2D and 3D configuration management system are utilized in a variety of CALS system for user's convenience and safety in maintenance. In this paper, the 2D and 3D configuration system will be discussed for necessity and possibility. This system include RAMS(reliability, availability, maintainability and safety) of the vehicles shall be enhanced in the future.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1327-1335
• /
• 2011

Recently, also in railway vehicles, related products are being designed and manufactured through RAMS activities in order to secure their reliability, availability, maintainability & safety. Subway operators are conducting R&D on various preventive maintenance methods and applying them to the field so as to establish a reliability centered maintenance(RCM) system. In this connection, manufacturers shall carry out R&D based on reliability from the first design stage of development to provide high quality products to subway operators. And operators shall have the products operated properly to their particular operating environment and managed based on the standard maintenance manual. Not only that, but the related field data shall be fed back into the manufacturers to upgrade upcoming products by organic cooperation between manufacturer and operators. However, the mutually beneficial cooperative relationship is not still developed in the domestic railway industry. In terms of methodology for life prediction, this study was intended to analyze field data on relays used for rolling stocks considering operational characteristics in the position of subway operators and predict parts reliability using reliability prediction program from the standpoint of manufacturers as well.

• 전기학회논문지P
• /
• 제64권4호
• /
• pp.212-219
• /
• 2015

Korea's first tram (so called "tram"), which was commenced the operation on May 4, 1899 of late Joseon Dynasty and run until 1968, played a pivotal role of public transportation. However, tram as new transportation mean is being recognized as traffic congestion problem becomes issue due to geometric automobile increase and reckless urban plan after stoppage of tram service. Tram has an advantage of inexpensive construction cost and eco-friendly means compared to existing and city railway, carrying more passengers rather than existing bus, excellent connectivity of existing transportation because of easy accessible to destination in the city center. Therefore, tram, what is called "Green Rvolution of Public Transportation", has a dreaming of revival and in the process of pushing. We suggest the accident type which might break out in the early stage of tram introduction and preventive measures by surveying the accident cases of tram advanced country, and study the crossing control measures.