• Journal of Satellite, Information and Communications
• /
• v.10 no.1
• /
• pp.12-16
• /
• 2015

In this paper, we introduce a wireless package system based on the amateur radio HR(HAM Radio) and satellite communication as a novel wireless disaster communication system and have configured a interference scenario receiving interference from adjacent base stations and D2D groups in the disaster network. In such interference scenarios, we propose a frequency re-allocation method to avoid interference and communicate with disaster networks by securing the channel capacity required between D2D terminals. As a result of computer simulation, we can find the proposed method has improved BED performance of a gain of 1.5dB and overall system throughput than conventional methods.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.6
• /
• pp.17-22
• /
• 2013

Heterogeneous radios are used in disaster management agencies for a variety of reasons though the radio must have the same radio frequency and protocol for voice communication. For this reason, the variety of heterogeneous radio voice connection methods have been studied but these are simple analog voice line cross connection or partial networked based on digitalization. In this paper, we suggest the method of voice packet transmission method based on All-IP per radio through IP network using SIP/RTP for scalability and openness and developed a prototype of the proposed method was verified.

• International journal of advanced smart convergence
• /
• v.12 no.1
• /
• pp.92-100
• /
• 2023

Wireless communication technology is becoming increasingly prevalent in smart factories, but the rise in the number of wireless devices can lead to interference in the ISM band and obstacles like metal blocks within the factory can weaken communication signals, creating radio shadow areas that impede information exchange. Consequently, accurately determining the radio communication coverage range is crucial. To address this issue, a Radio Environment Map (REM) can be used to provide information about the radio environment in a specific area. In this paper, a technique for estimating an indoor REM usinga mobile robot and machine learning methods is introduced. The mobile robot first collects and processes data, including the Received Signal Strength Indicator (RSSI) and location estimation. This data is then used to implement the REM through machine learning regression algorithms such as Extra Tree Regressor, Random Forest Regressor, and Decision Tree Regressor. Furthermore, the numerical and visual performance of REM for each model can be assessed in terms of R2 and Root Mean Square Error (RMSE).

• Journal of Digital Convergence
• /
• v.12 no.12
• /
• pp.257-264
• /
• 2014

Through MCU model, Radio Frequency communication is completed using universal asynchronous receiver and transmitter. The communicatin with PC and MCU is completed using RS-232 cable. At first interconnected communication with PC and MCU is necessary for RF communication because tha UART is based technique for RF communication. Program imbeded in microcontroller unit is ran during RF signal is transmitted to other RF module. Data connected with PC and MCU is transmitted between PC and MCU during PC and MCU is connected.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.04a
• /
• pp.206-209
• /
• 2014

Control message exchange is major job for cognitive radio to exist and use spectrum opportunistically. For this control message exchange they need a common control channel (CCC). Once this channel is affected by a primary user, communication stops until new CCC is setup. This takes substantial time and if they could not get free channel, this halt continues for long time. To prevent such cease of communication, we propose a combination of two networks, namely WLAN and UWB, to let the communication continue. In our proposed idea if the CCC of a certain CR in WLAN is affected, the CR changes its network from WLAN to UWB and keeps the communication because UWB cannot be affected by PU. In the proposed idea every cognitive radio has two transceivers; one for the overlay network (WLAN) and another UWB network. If a primary user is detected in the spectrum of a cognitive radio, it continues exchanging control messages under the UWB network and in parallel negotiates for a new CCC using the WLAN network. This idea solves the communication interruption until new CCC is setup.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.1277-1280
• /
• 2009

본 논문은 ITU-T 권고안 J-38 부록 B에 명시된 전송방식의 분석 및 시뮬레이션을 토대로 성능을 분석 하였으며 FPGA 구현시 야기되는 문제점을 나타내고, 해결방안을 제시하였다. 구현상의 문제점으로는 크게 두 가지로 분류되는데, 첫째로 다양한 부호화 방식과 변조방식 그리고 심볼 단위 및 비트 단위의 처리로 인해 많은 클럭수를 요구하는데 본 논문에서는 읽기/쓰기 메모리를 이용하여 필요한 클럭수를 줄였다. 둘째로는 펑쳐링 부호화된 TCM 복호기에 펑처링 패턴에 정확한 동기를 얻지 못하면 프레임 동기 심볼인 UW(Unique sync-Word)를 획득하지 못하여 모든 데이터가 에러 처리되기 때문에 본 논문에서는 펑처링 패턴과 UW 심볼의 동기를 맞추는 알고리즘을 제시하였다. 이러한 알고리즘 분석 및 구현상의 문제점 해결을 토대로 본 논문에서는 ITU-T J38 annex B의 하향 스트림 채널 부호화 시스템을 VHDL 언어를 사용하여 FPGA 칩에 직접 구현하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.1296-1299
• /
• 2009

본 논문은 이동체에 대한 위성방송 및 인터넷 서비스를 지속적으로 제공하기 위해 기존의 DVB-S2 표준화에 DVB-H 와 DVB-T 를 결합한 새로운 DVB-SSP 표준화에 대한 연구를 하고 있다. 이동형 DVB-S2의 표준화는 DVB-SSP 라 불리며 최근에는 DVB-SH로 불리고 있다. 이는 이동체에 대해서 위성을 이용한 통신 방식을 규정하고 있으며, physical layer 와 upper layer 의 두 단계로 부호화 및 복호화하는 방식인 cross layer 부호화 방식을 적용하고 있다. 기존의 방식 경우, LDPC 복호후 CRC 검사를 수행하여 수신된 데이터에서 1 bit 의 오류에도 IP 패킷 모두를 삭제함으로써 복호시 비효율성을 나타낼 수 있다. 따라서 본 논문에서는 LDPC 복호기에 출력되는 LLR 값을 이용하여 IP 패킷 전체를 삭제하는 것이 아니라 LLR 값이 낮은 비트만 선택적으로 삭제하는 방식을 제안하며, 이를 시뮬레이션하여 기존의 CRC 방식과 비교하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.1
• /
• pp.1-8
• /
• 2018

It is the content and scope of this study to analyze the problems of the current wireless service and the classification system of the radio station, and to examine the case of radio control in Japan and to establish a reasonable and efficient radio wave management plan. The results of this study can be used as basic data for reorganizing the legislation on radio wave enforcement ordinance, radio services and radio station classification standards. It is expected that it will be possible to improve the compliance and efficiency of the radio station licensing and inspection service while enhancing the policy compliance in the practical work by providing detailed explanations on the definition and classification system of the new radio task / radio station in the future.

• Journal of Advanced Navigation Technology
• /
• v.13 no.2
• /
• pp.244-251
• /
• 2009

In this paper, a compact slot antenna for 2.4GHz ISM band applications has been designed. The folded slot with some additional meander sections are used in the design of the antenna within the restricted PCB space. The operating frequency band and the fractional bandwidth of the antenna is about 2.32~2.58 GHz and 11%, and the radiation patterns within the operation bandwidth are almost same. Also, the radiation efficiency and gain of the antenna is more than 49% and 1.2 dBi respectively. To check the validity of the design result, the measurement and simulation results are compared and presented.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.9
• /
• pp.1998-2016
• /
• 2012

Reliable spectrum sensing algorithm is a fundamental component in cognitive radio. In this paper, a non-cooperative spectrum sensing algorithm which needs only one cognitive radio node named CORDIC (Coordinate Rotation Digital Computer) Jacobi based method is proposed. The algorithm computes the eigenvalues of the sampled covariance of received signal mainly by shift and additional operations, which is suitable for hardware implementation. Based the latest random matrix theory (RMT) about the distribution of the limiting maximum and minimum eigenvalue ratio, the relationship between the probability of false alarm and the decision threshold is derived. Simulations and discussions show the method is effective. Real captured digital television (DTV) signals and Universal Software Radio Peripheral (USRP) are also employed to evaluate the performance of the algorithm, which prove the proposed algorithm can be applied in practical spectrum sensing applications.