• 제목/요약/키워드: R744

검색결과 121건 처리시간 0.046초

일본의 $CO_2$ 냉매를 이용한 열펌프급탕기 개발 동향

  • 김만회
    • 대한설비공학회지:설비저널
    • /
    • 제31권7호
    • /
    • pp.65-70
    • /
    • 2002
  • 지구의 오존층을 보호하기 위한 몬트리올 의정서가 1987년 채택된 이후 오존층 파괴물질의 사용이 점차 감소되고 있다. 선진국의 경우 1995년 말부터 CFC냉매의 생산을 전폐하였고, HCFC냉매의 경우는 2020년 전폐를 목표로 대체냉매를 이용한 응용 기술개발 및 제품 생산이 진행되고 있다. 가정용 냉장고 및 차량용 에어컨에는 R-12의 대체냉매로 R-134a가 도입되었으며, 유럽을 중심으로 냉장고에는 HC계 냉매인 R-600a도 대체냉매로 사용되고 있다. 가정용 에어컨에는 혼합냉매인 R-407c 와 R-410a가 R-22 냉매를 대체하여 적용되고 있다. 그러나 현재, CFC및 HCFC 대체 냉매로 많이 사용되고 있는 HFC계 냉매도 지구 온난화 지수가 대단히 큰 문제를 가지고 있다. 1997년 채택된 교토의 정서에는 HFC계 냉매가 온실효과가 가스 배출규제물질에 포함되어 있다. 이에 따라서 오존층의 파괴지수가 영이고 지구온난화지수도 거의 없는 자연냉매가 주목을 받게 되었으며, 자연 냉매의 하나인 이산화탄소 ($CO_2$R744) 냉매의 응용기술 및 제품개발 연구가 선진국을 중심으로 폭넓게 진행되고 잇다. 본고에서는 $CO_2$냉매의 일반적인 특성을 간단히 소개하고 일본에서 진행되고 있는 $CO_2$냉매를 적용한 급탕시스템의 제품개발 및 시장현황에 대해서 기술하기로 한다.

  • PDF

초임계 영역내 $CO_2$ 냉각 열전달과 압력강하 분석 (Analysis of Heat Transfer and Pressure Drop During Gas Cooling Process of Carbon Dioxide in Transcritical Region)

  • 손창효;이동건;정시영;김영률;오후규
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제28권1호
    • /
    • pp.65-74
    • /
    • 2004
  • The heat transfer coefficient and pressure drop of $CO_2$(R-744) during gas cooling Process of carbon dioxide in a horizontal tube were investigated experimentally and theoretically. The experiments were conducted without oil in the refrigerant loop. The main components of the refrigerant loop consist of a receiver. a variable-speed pump. a mass flowmeter, an evaporator. and a gas cooler(test section). The main components of the water loop consist of a variable-speed Pump. an constant temperature bath. and a flowmeter. The gas cooler is a counterflow heat exchanger with refrigerant flowing in the inner tube and water flowing in the annulus The test section consists of smooth, horizontal stainless steel tube of 9.53 mm outer diameter and 7.75 mm inner diameter. The length of test section is 6 m. The refrigerant mass fluxes were 200 ~ 300 kg/($m^2{\cdot}s$) and the inlet pressure of the gas cooler varied from 7.5 MPa to 8.5 MPa. The main results were summarized as follows : The predicted correlation can evaluated the R-744 exit temperature from the gas cooler within ${\pm}10%$ for most of the experimental data, given only the inlet conditions. The predicted gas cooley capacity using log mean temperature difference showed relatively food agreement with gas cooler capacity within ${\pm}5%$. The pressure drop predicted by Blasius estimated the pressure drop on the $CO_2$ side within ${\pm}4.3%$. The predicted heat transfer coefficients using Gnielinski's correlation evaluated the heat transfer coefficients on the $CO_2$ side well within the range of experimental error. The predicted heat transfer coefficients using Gao and Honda's correlation estimated the heat transfer coefficients on the coolant side well within ${\pm}10\;%$. Therefore. The predicted equation's usefulness is demonstrated by analyzing data obtained in experiments.

250 km/h급 강체전차선로 설계파라미터 제시 (A Propose of Design Parameters for the Max. Speed of 250 km/h of Overhead Rigid Conductor System)

  • 이기원;조용현
    • 전기학회논문지
    • /
    • 제66권4호
    • /
    • pp.740-744
    • /
    • 2017
  • Overhead Line is divided by two systems which are OCS (Overhead Catenary Line) and R-Bar (Overhead Rigid Conductor system). R-Bar has an advantage of maintenance and economic aspect comparing with OCS. R-Bar in Korea has developed for the max. speed of 120km/h, but it is evaluated up to the max. speed of 250 km/h in Europe. There are lots of mountains and underground sections in korea, it is really necessary to develop the R-Bar for a high-speed line. In the study, design parameters for the max. speed of 250 km/h of R-Bar was proposed. A bracket space, stiffness, and especially an installation tolerance of contact wire height at a bracket were considered as a parameter, and a dynamic behavior between a contact wire and pantograph was predicted by evaluated FEM simulation tool. The installation tolerance and bracket space are more important for the high-speed system. The proposed parameters was decided very conservative. Because the aerodynamic characteristics of a pantograph in tunnel is more severe than an open route and the simulation tool is not considered the such kind of aerodynamic characteristics.

Surface displacements due to tunneling in granular soils in presence and absence of geosynthetic layer under footings

  • Rebello, Nalini E.;Shivashankar, R.;Sastry, Vedala R.
    • Geomechanics and Engineering
    • /
    • 제15권2호
    • /
    • pp.739-744
    • /
    • 2018
  • This paper presents the results of numerical modeling studies on the effect of displacements of tunneling in granular soils. Presence of building loads is considered, to find displacement generated at the surface on tunnel. Effect of varying eccentricities of building is simulated, to find influence of building on vertical and horizontal displacement. Studies were carried out in two cases of with and without a geosynthetic layer installed at the bottom of the footing. Results of analysis revealed, the presence of geosynthetic layer under footing, with building placed on centre line, reduced the surface displacements compared to displacement generated without geosynthetic layer. Presence of geosynthetic layer under footing had a dominant effect in reducing displacements in high storey structures. However, when the building was shifted to greater eccentricities from centre line, presence of geosynthetic layer, led to insignificant reduction of displacements on the centre line at the surface.

Crystal Structure Analysis of N,N'-bis(3-chloro-2-methylsalicylidene)-1,4-butanediamine

  • Sharmila, P.;Rajesh, R.;Venkatesan, R.;Ganapathy, Jagadeesan;Aravindhan, S.
    • 통합자연과학논문집
    • /
    • 제9권4호
    • /
    • pp.255-260
    • /
    • 2016
  • The crystal structure of the saliciline derivatives N,N'-bis(3-chloro-2-methylsalicylidene)-1,4-butanediamine ($C_{20}H_{22}Cl_2N_2O_2$) has been determined from single crystal X-ray diffraction data. In the title compound crystallizes in the triclinic space group $P{\bar{i}}$ with unit cell dimension $a=4.6085(3){\AA}$, $b=5.9747(3){\AA}$ and $c=5.9747(3){\AA}$ [${\alpha}=83.889(4)^{\circ}$, ${\beta}=86.744(5)^{\circ}$ and ${\gamma}=82.085(5)^{\circ}$]. The title compound is essentially planar conformation. The compound lies across a crystallographic inversion centre and adopts E configurations with respect to the C-N bonds. The crystal packing of the molecules of compound is stabilized through weak O-H...N intra molecular interactions

해안분지의 현장 토양수분 관측과 HYDRUS-1D 모델링을 이용한 지하수 함양 추정 (Estimation of deep percolation using field moisture observations and HYDRUS-1D modeling in Haean basin)

  • 김정직;전우현;이진용
    • 지질학회지
    • /
    • 제54권5호
    • /
    • pp.545-556
    • /
    • 2018
  • 본 연구에서는 강원도 양구군 해안면에서 토양수분 관측과 수치 모델링을 이용하여 강우에 따른 잠재 지하수 함양량을 정량적으로 추정하였다. 토양수분 모니터링을 위해 깊이별(30, 60, 90 cm)로 토양수분 센서를 4지점(YHS1-4)에 설치하였으며 YHS3 주변에 자동기상관측 장비도 설치하였다. 토양수분 모니터링 기간은 2017년 3월 25일부터 2018년 3월 25일까지이며 기상관측 기간은 2016년 5월 6일부터 2018년 5월 6일까지이다. HYDRUS 1D 프로그램을 이용하여 우기인 2017년 6월부터 8월까지 수치해석을 수행하였다. 토양수분 모니터링 기간 동안 평균 토양수분함량은 YHS3에서 $0.300-0.334m^3/m^3$로 전반적으로 높았으며 YHS1에서 $0.129-0.265m^3/m^3$의 가장 낮은 수분 함량 범위들을 보였다. 토양수분 이동 모델링 결과 현장 관측 값과 모델링 값은 유사하였으나 피크 값들이 모델링 결과가 큰 것으로 나타났다. 관측 및 모델링 자료의 상관분석 결과 r, $r^2$, RMSE는 각각 0.88, 0.77, 0.0096으로 높은 상관성 및 낮은 오차율을 나타냈다. 모델링 설정기간 동안 500 cm 깊이에서의 총 잠재 지하수 함양량은 744.2 mm로 나타났다. 이는 2017년 강수량(1,214 mm)의 61.3%가 함양된 것으로 나타났다. 연구지역의 잠재 지하수 함양량은 높은 것으로 나타났으며 불포화대를 통한 지하수 함양 추정연구에 유의미한 결과 값을 제공할 수 있을 것으로 여겨진다.

수평관내 이산화탄소의 증발 열전달 특성 (Evaporative Heat Transfer Characteristics of Carbon Dioxide in a Horizontal Tube)

  • 손창효;이동건;김영률;오후규
    • 설비공학논문집
    • /
    • 제16권12호
    • /
    • pp.1134-1139
    • /
    • 2004
  • The evaporative heat transfer coefficient of $CO_2$ (R-744) in a horizontal tube was investigated experimentally. The experiments were conducted without oil in a closed refrigerant loop which was driven by a magnetic gear pump. The main components of the refrigerant loop are a receiver, a variable-speed pump, a mass flow meter, a pre-heater and evaporator (test section). The test section consists of a smooth, horizontal stainless steel tube of inner diameter of 7.75 mm. The experiments were conducted at mass flux of 200 to 500 kg/m$^2$s, saturation temperature of -5 to 5$^{\circ}C$, and heat flux of 10 to 40kW/m$^2$. The test results showed the heat transfer of $CO_2$ has a greater effect on nucleate boiling more than convective boiling. Mass flux of $CO_2$ does not affect nucleate boiling too much, and the effect of mass flux on evaporative heat transfer of $CO_2$ is much smaller than that of refrigerant R-22 and R-134a. In comparison with test results and existing correlations, correlations failed to predict the evaporative heat transfer coefficient of $CO_2$, therefore, it is necessary to develope reliable and accurate predictions determining the evaporative heat transfer coefficient of $CO_2$ in a horizontal tube.

Iodine Quantification on Spectral Detector-Based Dual-Energy CT Enterography: Correlation with Crohn's Disease Activity Index and External Validation

  • Kim, Yeon Soo;Kim, Se Hyung;Ryu, Hwa Sung;Han, Joon Koo
    • Korean Journal of Radiology
    • /
    • 제19권6호
    • /
    • pp.1077-1088
    • /
    • 2018
  • Objective: To correlate CT parameters on detector-based dual-energy CT enterography (DECTE) with Crohn's disease activity index (CDAI) and externally validate quantitative CT parameters. Materials and Methods: Thirty-nine patients with CD were retrospectively enrolled. Two radiologists reviewed DECTE images by consensus for qualitative and quantitative CT features. CT attenuation and iodine concentration for the diseased bowel were also measured. Univariate statistical tests were used to evaluate whether there was a significant difference in CTE features between remission and active groups, on the basis of the CDAI score. Pearson's correlation test and multiple linear regression analyses were used to assess the correlation between quantitative CT parameters and CDAI. For external validation, an additional 33 consecutive patients were recruited. The correlation and concordance rate were calculated between real and estimated CDAI. Results: There were significant differences between remission and active groups in the bowel enhancement pattern, subjective degree of enhancement, mesenteric fat infiltration, comb sign, and obstruction (p < 0.05). Significant correlations were found between CDAI and quantitative CT parameters, including number of lesions (correlation coefficient, r = 0.573), bowel wall thickness (r = 0.477), iodine concentration (r = 0.744), and relative degree of enhancement (r = 0.541; p < 0.05). Iodine concentration remained the sole independent variable associated with CDAI in multivariate analysis (p = 0.001). The linear regression equation for CDAI (y) and iodine concentration (x) was y = 53.549x + 55.111. For validation patients, a significant correlation (r = 0.925; p < 0.001) and high concordance rate (87.9%, 29/33) were observed between real and estimated CDAIs. Conclusion: Iodine concentration, measured on detector-based DECTE, represents a convenient and reproducible biomarker to monitor disease activity in CD.

초등학교 남자아동의 모자 제작을 위한 머리부위 측정 및 형태 분석 (Analysis on the Measurement and Shape Classification of the Bead of Korean Male Children for the Headwear Sizing System)

  • 김선희
    • 한국의류학회지
    • /
    • 제29권5호
    • /
    • pp.737-744
    • /
    • 2005
  • This study was aimed to provide the measurement data and shape classification of the head of the Korean male children for the headwear sizing systems. Five hundred twenty male children, aged nine to twelve years, participated f3r this study. The 17 regions on the head and height, weight of the subjects were directly measured by the expert experimenters. Factor analysis, cluster analysis, GLM analysis and Tukey HSD test were performed using these data. Through factor analysis, low factors were extracted upon factor scores and those factors comprised $69.76\%$ for the total variances. Three clusters as their head shape were categorized using four factor scores by cluster analysis. Type 1 was characterized by the widest width and Bitragion arc, shortest head length. Type 2 had the longest head length and the widest side width and the highest head length and head circumference. Type 3 was characterized by the smallest head circumstance, head width and side width, and medium head length.

SOAP기반의 분산처리 스케줄링 프레임웍: pyBubble (SOAP-based Distributed Processing Scheduling Framework: pyBubble)

  • 이동우;최지현;성기문
    • 한국정보과학회:학술대회논문집
    • /
    • 한국정보과학회 2004년도 봄 학술발표논문집 Vol.31 No.1 (A)
    • /
    • pp.742-744
    • /
    • 2004
  • 본 논문은 웹 서비스 프로토콜인 SOAP기반의 병렬처리 프레임웍인 pyBubble의 설계와 구현에 관한 것이다. 그리드 어플리케이션 프로그래밍의 어려움을 덜기 위해 그리드 미들웨어들로부터의 복잡성에 투명성을 제공하는 것을 본 논문의 목표로 한다. 이는 RPC스타일의 프로그래밍 인터페이스를 지원하면서 파이썬 스크립트 언어의 이식성과 확장성을 통해 기존 병렬처리 어플리케이션의 그리드화와 다양한 자원 스케줄링을 연구 할 수 있도록 하는 스케줄링 프레임웍이 주요 기능적 요소이다. 병렬처리를 위해 비동기 SOAP과 이를 이용한 Task-Farming과 DAG기반의 스케줄링의 지원함으로써 고성능의 그리드 계산환경을 제공하고자 한다.

  • PDF