• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.4
• /
• pp.941-951
• /
• 1994

The resilient behavior of subbase materials, locally used in Korea. were evaluated in this study by performing laboratory MR tests. The variations of the MR value according to LVDT's location in experiments and moisture conditions, respectively, were evaluated. And, in order to determine the relevant MR characteristics of the prototype materials, laboratory model tests containing smaller particles than those of the prototype were conducted. Based on above results, the relationship of the MR and the bulk stress (${\theta}$) was suggested. The case using internal LVDT. gave much larger $M_R$ value than that using external LVDT, since the external LVDT somewhat overestimates the resilient strain. The measured $M_R$ in damp conditions ($S_r$=40%) was larger than that in wet conditions ($S_r$=70%) by about 10%. The relationship between the $M_R$ and the void ratio was linear according to particle size effect. The relationship of the $M_R$ and the bulk stress (${\theta}$) on subbase materials in damp conditions to be used in Korea could be recommended as $M_R=3960{\cdot}{\theta}^{0.60}$ psi.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.7
• /
• pp.659-666
• /
• 2000

Heat transfer characteristics of a heat exchanger for low temperature waste heat recovery using oscillating capillary tube heat pipe were evaluated against the charge ratio variation of working fluid and various working fluids. R-l42b, R-22 and R-290 were used as working fluids. The heat exchanger was composed of heat pipe with capillary tube bundles, having a 2.6mm in outer diameter, 1.4mm in inner diameter with 101m long, and 40 turns. Charge ratio of working fluid was 40% and 50%. Water was used as secondary fluid. Inlet temperature and mass velocity for each secondary fluid were 297 K, 280 K and9~27 kg /$m^2s$,, respectively. From experimental results, it was found that heat transfer performance of R-22 was higher than those of R-l42b and R-290 and it was proportional to Figure of merit for thermosyphons. As a result, it was thought that R-22 was the most suitable working fluid of waste heat recovery for low temperature waste heat recovery.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.6
• /
• pp.541-549
• /
• 2000

The present study experimentally investigated the effect of refrigeration oil on the condensation heat transfer for R-407C and R-22 in a microfin tube with a U-bend. POE oil ($74.1\;\textrm{mm}^2/s,\;40^{\circ}C$,) and mineral oil $62.5\;\textrm{mm}^2/s,\;40^{\circ}C$,) were used for R-407C and R-22 respectively Experimental parameters were an oil concentration from 0 to 5%, a mass flux from 100 to $400kg/m^{2}s sand an inlet quality from 0.5 to 0.9. The enhancement factors for both R-22 and R-407C refrigerants at the first straight section decreased continuously as the oil concentration increased. They decreased rapidly as the mass flux decreased and the inlet quality increased. The heat transfer coefficients in the U-bend showed the maximum at the $90^{\circ}$/TEX> position. The heat transfer coefficients at the second straight section within the dimensionless length of 48 were larger by a maximum of 33% than the average heat transfer coefficient at the first straight section.

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.4
• /
• pp.150-156
• /
• 2002

In this paper, the traffic carrying capacity of the IMT-2000 ATM-MSC is analyzed by using the reference throughput based on ITU-R. The IMT-2000 services are classified into circuit switching(speech. circuit-switched data. high interactive multimedia) and packet switching(simple message, medium multimedia, high multimedia). The indoor vehicle and pedestrian users are considered. The AAL type 2 for the speech are considered. The ratio of indoor：pedestrian：vehicle are assumed to be 40：40：20%, and size 256 of ATM-MSC are designed.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.2
• /
• pp.31-40
• /
• 2017

In this paper, we compared the efficiencies of national R&D investments between NT (Nanotechnology) areas in terms of papers, patents, and commercializations, and found ways to improve the efficiencies of national R&D investments for each NT area. This is in response to huge R&D investments government has made recently in NT areas. Here, we collected data on investments, papers, patents, and commercializations for the R&D projects in NT areas through National Science & Technology Information Service. Based on the data, we analyzed the investment and performances (papers, patents, and commercializations) for each NT area, calculated the efficiency for each NT area, and compared the efficiencies between NT areas. Next, using cluster analysis, we identified several NT areas with similar characteristics in terms of paper efficiency, patent efficiency and commercialization efficiency. Finally, we derived implications for the efficiency enhancement for each grouping. The cluster analysis showed that there could be two groups, one being low in terms of technological outcome (papers and patents) efficiencies and high in terms of commercialization efficiencies, while the other being high in terms of technological outcome (papers and patents) efficiencies and low in terms of commercialization efficiencies. Therefore, the strategy for one group calls for support for technology transfer or technology introduction from other R&D performers and grant of guidance for improving R&D performers' commercialization ability to other R&D performers while the strategy for the other group calls for R&D support for transfer of technology to other R&D performers, activation of technology transfer and support for commercialization of R&D performers.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.1
• /
• pp.9-17
• /
• 2001

In this study, flow boiling experiments were performed using R-134a on a plain tube bundle. Tests were conducted for the following range of variables; quality from 0.1 to 0.9, mass flux from $8\;kg/m^2s$ to $26\;kg/m^2s$ and heat flux from $10\;kW/m^2s$ to $40\;kW/m^2s$. The heat transfer coefficients were strongly dependent on the heat flux. However, they were almost independent on the mass flux or quality. The data are compared with the modified Chen model, which satisfactorily () predicted the data. Original Chen model, however, did not adequately predict the effect of quality. The reason may be attributed to the flow pattern of the present test, where the bubbly flow prevailed for the entire test range. The heat transfer coefficients of the tube bundle were 6~40% higher than those of the single tube pool boiling.

• KDI Journal of Economic Policy
• /
• v.40 no.4
• /
• pp.47-63
• /
• 2018

Government R&D grants for SMEs have risen to three trillion Korean won a year, placing Korea second among OECD nations. Indeed, analysis results have revealed that government support has not only expanded corporate R&D investment and the registration of intellectual property rights but has also increased investment in tangible and human assets and marketing. However, value added, sales and operating profit have lacked improvement owing to an ineffective recipient selection system that relies solely on qualitative assessments by technology experts. Nevertheless, if a predictive model is properly applied to the system, the causal effect on value added could increase by more than two fold. Accordingly, it is important to focus on economic performance rather than technical achievements to develop such a model.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.3
• /
• pp.105-109
• /
• 2011

Critical angle of quartz (R.I. ${\fallingdotseq}$ 1.553) and diamond (R.I. = 2.417) are $40.09^{\circ}$ and $24.26^{\circ}$ that calculated by $sin{\theta}=r_2/r_1$ (r = refractive index, $r_1$ > $r_2$). Brilliance of quartz and diamond are 20.33% and 55.07%. The brilliance data are result of study on the incident light internal round brilliant cut quartz and diamond by the critical angle. Cause of bow-tie phenomenon can be studied by application of critical angle theory and light path inside fancy shape brilliant cut. When refractormetry with typical gem refractometer, critical angle of quartz and corundum are $59.1^{\circ}$ and $77.9^{\circ}$.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.40 no.4
• /
• pp.19-33
• /
• 2015

Recently, interest in research and development (R&D) investment decisions have increased among Korean domestic enterprises. However, existing R&D investment studies only focused on government R&D investment policies while only a few studies investigated firm level R&D investment. Prior literatures also overlooked the feedback loop between R&D investment and firm performance. Therefore, this paper identifies a system dynamics model for R&D investment decision making in domestic electronics firms. The conceptual model is derived from R&D investment-related theories found in bodies of literature on company performance, enterprise activity, and market maturity. This study investigates the dynamic feedback between R&D activities and sales using the system dynamics model. In other words, the system dynamics model is used to explain the change in the closed feedback circulation structure in R&D investment activities including technology development, production process, and marketing that subsequently result in sales increase and re-investment into R&D from the generated revenues. There are two major results. First, a similar ratio of investment on technology development and production process derives the higher company sales. Second, regardless of market maturity, marketing investment ratio positively affects sales and R&D budget growth. This study provides a system dynamics model to find the optimal ratio for R&D investment and suggests managerial strategic implications on electronic firm R&D investment decision making under market maturity condition.

• Archives of Plastic Surgery
• /
• v.40 no.2
• /
• pp.89-90
• /
• 2013