• Title/Summary/Keyword: R2S

Search Result 17,102, Processing Time 0.055 seconds

Intramuscular Administration of Zinc Metallothionein to Preslaughter Stressed Pigs Improves Anti-oxidative Status and Pork Quality

  • Li, L.L.;Hou, Z.P.;Yin, Y.L.;Liu, Y.H.;Hou, D.X.;Zhang, B.;Wu, G.Y.;Kim, S.W.;Fan, M.Z.;Yang, C.B.;Kong, X.F.;Tang, Z.R.;Peng, H.Z.;Deng, D.;Deng, Z.Y.;Xie, M.Y.;Xiong, H.;Kang, P.;Wang, S.X.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.20 no.5
    • /
    • pp.761-767
    • /
    • 2007
  • This study was conducted to determine the effects of exogenous zinc-metallothionein (Zn-MT) on anti-oxidative function and pork quality. After feeding a corn-soybean meal-based diet for two weeks, 48 pigs ($Duroc{\times}Landrace{\times}Chinese\;Black Pig$) were assigned randomly to four groups. Pigs in Group 1 were maintained under non-stress conditions, whereas pigs in Groups 2, 3 and 4 were aggressively handled for 25 min to produce stress. Pigs in Groups 1, 2, 3, and 4 received intramuscular administration of saline (control group; CON), 0 (negative control group; NCON), 0.8 (low dose group; LOW), and 1.6 (high dose group; HIGH) mg rabbit liver Zn-MT per kg body weight, respectively. Pigs were slaughtered at 3 and 6 h post-injection. Zn-MT treatment increased (p<0.05) the activities of superoxide dismutase (SOD) and glutathione-peroxidase (GSH-PX) while decreasing the concentration of malondialdehyde (MDA) in liver. These responses were greater (p<0.05) at 6 h than at 3 h post Zn-MT injection. Zn-MT treatment increased (p<0.05) hepatic SOD mRNA levels in a time and dose-dependent manner and decreased (p<0.05) serum glutamate-pyruvate transaminase and lactate dehydrogenase activities (indicators of tissue integrity). Zn-MT administration decreased (p<0.05) lactate concentration and increased (p<0.05) pH and water-holding capacity in the longissimus thorasis meat. Collectively, our results indicate that intramuscular administration of Zn-MT to pre-slaughter stressed pigs improved tissue anti-oxidative ability and meat quality.

Physicochemical Characteristics of Liquid Fertilizer made from Pig Manure in Korea (국내 돼지분뇨의 액비성분 특성 비교조사)

  • Jeon, Sang-Joon;Kim, Soo-Ryang;Rho, Kyung-Sang;Choi, Dong-Yoon;Kim, Dong-kyun;Lee, Myung-Gyu
    • Journal of Animal Environmental Science
    • /
    • v.18 no.3
    • /
    • pp.221-228
    • /
    • 2012
  • Physicochemical properties of liquid fertilizer samples of resource organization, which are domestically produced and distributed, are analyzed. Major contents of the research results are as follows. 1. The ratio of complete decomposition for liquid fertilizer is 49% at Public Resource Center and 33% at Liquid Fertilizer Supply Center. The combined ratio of both half-decomposed and un-decomposed liquid fertilizers is over 50% at both centers. 2. The ratio of complete decomposed liquid fertilizer, 67%, is the highest in Gangwon and Gyeonggi-do area. The ratio of un-decomposed liquid fertilizer is high in Chungbuk and Chungnam area. The sum of ratios of the half- and un-decomposed is over 60% in the areas except Gyeonnggi-do and Gangwon-do. 3. As a result of regional comparison of the physicochemical properties of liquid fertilizers, concentration variation in most of the items are large, and the degree of uniformity is found to be considerably low. In particular, concentration variation in T-N and $NH_4$-N is the most noticeable. 4. The items that physicochemically correlated to the degree of decomposition of liquid fertilizer are appeared to be T-N, $NH_4$-N, $NO_3$-N, EC, $SCOD_{Mn}$, and ORP. 5. The physicochemical average values of the liquid fertilizer estimated as "complete decomposed" are appeared to be T-N 829 mg/L,$NH_4$-N 517 mg/L, $NO_3$-N 151 mg/L, $SCOD_{Mn}$ 1,205 mg/L, EC 10.32 mS/cm, ORP -117.12 mV.

Estimation of Air Pollution Using Epiphytic Lichens on Forest Trees around Ulsan Industrial Complex (수목착생지의류(樹木着生地衣類)를 이용한 울산지역(蔚山地域)의 대기환경평가(大氣環境評價))

  • Chu, Eun-Young;Kim, Jong-Kab
    • Journal of Korean Society of Forest Science
    • /
    • v.87 no.3
    • /
    • pp.404-414
    • /
    • 1998
  • The purpose of this study was to investigate the influence of air pollution using epiphytic lichens on forest trees around Ulsan and Onsan industrial complex from April to June, 1997. The distribution of lichens was investigated at 58 sampled sites. In this study, 16 kinds of epiphytic lichens were recorded, of them, Lepraria sp. having a tolerance to air pollution showed the highest frequency as 30.85%, and in order of Lecanora strobilina(26.18%) and Parmelia austrosinensis(13.42%) unknown to tolerance of air pollution. The number of lichens was gradually decreased around industrial complex, where so - called "lichen desert" was detected. As being distant from the industrial complex, the mean degrees of cover were increased. The degrees of cover in the investigated sites ranged from I to V. According to $SO_2$ concentration limiting lichen's growth, the pattern of distribution of Cladonia sp., Dirinaria applanata, Parmelia austrosinensis, Lepraia sp. and Lecanora strobilina were dissimilar by sensitivity to air pollution Especially Lepraria sp. and Lecanora strobilina were widely distributed to degree of cover from I to V, and as the both had a similar distribution pattern, it could be inferred that Lecanora strobilina had also a tolerance to air pollution. The IAP values ranging from 0 to 64.3 were arranged into six groups and the investigated area was delineated into six IAP zones to represent degree of air environment. It was a high IAP value as being distant from industrial complex. The mare IAP increased, the more number of kinds of lichens increased. It was confirmed that the number of species, coverage and IAP value of epiphytic lichens showed a tendency to decrease of urban area and industrial complex.

  • PDF

Stellite bearings for liquid Zn-/Al-Systems with advanced chemical and physical properties by Mechanical Alloying and Standard-PM-Route

  • Zoz, H.;Benz, H.U.;Huettebraeucker, K.;Furken, L.;Ren, H.;Reichardt, R.
    • Proceedings of the Korean Powder Metallurgy Institute Conference
    • /
    • 2000.04a
    • /
    • pp.9-10
    • /
    • 2000
  • An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

  • PDF

An Assessment of Post-Injection Transmission Measurement for Attenuation Correction With Rotating Pin Sources in Positron Emission Tomography (양전자방출단층촬영(PET)에서 회전 핀선원과 투과 및 방출 동시 영상 방법을 이용한 감쇠보정 방법 특성에 관한 고찰)

  • Lee, J.R.;Choi, Y.;Lee, K.H.;Kim, S.E.;Chi, D.Y.;Shin, S.A.;Kim, B.T.
    • The Korean Journal of Nuclear Medicine
    • /
    • v.29 no.4
    • /
    • pp.533-540
    • /
    • 1995
  • Attenuation correction is important in producing quantitative positron emission tomography (PET) images. Conventionally, photon attenuation effects are corrected using transmission measurements performed before tracer administration. The pre-injection transmission measurement approach may require a time delay between transmission and emission scans for the tracer studies requiring a long uptake period, about 45 minutes for F-18 deoxyglucose study. The time delay will limit patient throughput and increase the likelihood of patient motion. A technique lot performing simultaneous transmission and emission scans (T+E method) after the tracer injection has been validated. The T+E method substracts the emission counts contaminating the transmission measurements to produce accurate attenuation correction coefficients. This method has been evaluated in experiments using a cylindrical phantom filled with background water (5750 cc) containing $0.4{\mu}Ci/cc$ of F-18 fluoride ion and one insert cylinder (276 cc) containing $4.3{\mu}Ci/cc$. GE $Advance^{TM}$ PET scanner and Ge-68 rotating pin sources for transmission scanning were used for this investigation. Post-injection transmission scan and emission scan were peformed alternatively over time. The error in emission images corrected using post-infection transmission scan to emission images corrected transmission scan was 2.6% at the concentration of $1.0{\mu}Ci/cc$. No obvious differences in image quality and noise were apparent between the two images. The attenuation correction can be accomplished with post-injection transmission measurement using rotating pin sources and this method can significantly shorten the time between transmission and omission scans and thereby reduce the likelihood of patient motion and increase scanning throughput in PET.

  • PDF

THEORETICAL STUDY ON OBSERVED COLOR-MAGNITUDE DIAGRAMS

  • Lee, See-Woo
    • Journal of The Korean Astronomical Society
    • /
    • v.12 no.1
    • /
    • pp.41-70
    • /
    • 1979
  • From $B\ddot{o}hm$-Vitense's atmospheric model calculations, the relations, [$T_e$, (B-V)] and [B.C, (B-V)] with respect to heavy element abundance were obtained. Using these relations and evolutionary model calculations of Rood, and Sweigart and Gross, analytic expressions for some physical parameters relating to the C-M diagrams of globular clusters were derived, and they were applied to 21 globular clusters with observed transition periods of RR Lyrae variables. More than 20 different parameters were examined for each globular cluster. The derived ranges of some basic parameters are as follows; $Y=0.21{\sim}0.33,\;Z=1.5{\times}10^{-4}{\sim}4.5{\times}10^{-3},\;age,\;t=9.5{\sim}19{\times}10^9$ years, mass for red giants, $m_{RG}=0.74m_{\odot}{\sim}0.91m_{\odot}$, mass for RR Lyrae stars, $m_{RR}=0.59m_{\odot}{\sim}0.75m_{\odot}$, the visual magnitude difference between the turnoff point and the horizontal branch (HB), ${\Delta}V_{to}=3.1{\sim}3.4(<{\Delta}V_{to}>=3.32)$, the color of the blue edge of RR Lyrae gap, $(B-V)_{BE}=0.17{\sim}0.21=(<(B-V)_{BE}>=0.18),\;[\frac{m}{L}]_{RR}=-1.7{\sim}-1.9$, mass difference of $m_{RR}$ relative to $m_{RG},(m_{RG}-m_{RR})/m_{RG}=0.0{\sim}0.39$. It was found that the ranges of derived parameters agree reasonably well with the observed ones and those estimated by others. Some important results obtained herein can be summarized as follows; (i) There are considerable variations in the initial helium abundance and in age of globular clusters. (ii) The radial gradient of heavy element abundance does exist for globular clusters as shown by Janes for field stars and open clusters. (iii) The helium abundance seems to have been increased with age by massive star evolution after a considerable amount (Y>0.2) of helium had been attained by the Big-Bang nucleosynthesis, but there is not seen a radial gradient of helium abundance. (iv) A considerable amount of heavy elements ($Z{\sim}10{-3}$) might have been formed in the inner halo ($r_{GC}$<10 kpc) from the earliest galactic co1lapse, and then the heavy element abundance has been slowly enriched towards the galactic center and disk, establishing the radial gradient of heavy element abundance. (v) The final galactic disk formation might have taken much longer by about a half of the galactic age than the halo formation, supporting a slow, inhomogeneous co1lapse model of Larson. (vi) Of the three principal parameters controlling the morphology of C-M diagrams, it was found that the first parameter is heavy clement abundance, the second age and the third helium abundance. (vii) The globular clusters can be divided into three different groups, AI, BI and CII according to Z, Y an d age as well as Dickens' HB types. BI group clusters of HB types 4 and 5 like M 3 and NGC 7006 are the oldest and have the lowest helium abundance of the three groups. And also they appear in the inner halo. On the other hand, the youngest AI clusters have the highest Z and Y, and appear in the innermost halo region and in the disk. (viii) From the result of the clean separations of the clusters into three groups, a three dimensional classification with three parameters, Z, Y and age is prsented. (ix) The anomalous C-M diagrams can be expalined in terms of the three principal parameters. That is, the anomaly of NGC 362 and NGC 7006 is accounted for by the smaller age of the order of $1{\sim}2{\times}10^9$ years rather than by the helium abundance difference, compared with M 3. (x) The difference in two Oosterhoff types I and II can be explained in terms of the mean mass difference of RR Lyrae variables rather than in terms of the helium abundance difference as suggested by Stobie. The mean mass of the variables in Oosterhoff type I clusters is smaller by $0.074m_{\odot}$ which is exactly consistent with Rood's estimate. Since it was found that the mean mass of RR Lyrae stars increases with decreasing Z, the two Oosterhoff types can be explained substantially by the metal abundance difference; the type II has Z<$3.4{\times}10^{-4}$, and the type I has higher Z than the type II.

  • PDF

Studies on the Utilization of Persimmons -(Part 5) Investigation of the Optimum Thickness of Film Bag for Poly Ethylene Film Storage of Astringent Variety- (감의 이용(利用)에 관(關)한 연구(硏究) -(제5보(第五報)) 삽시의 Polyethylene Film 저장(貯藏)에 따른 최적(最適) Film 두께의 조사(調査)-)

  • Sohn, T.H.;Choi, C.J.;Cho, R.K.;Seog, H.M.;Seong, C.H.;Seo, O.S.;Ha, Y.S.;Kang, J.H.
    • Korean Journal of Food Science and Technology
    • /
    • v.10 no.1
    • /
    • pp.73-77
    • /
    • 1978
  • This experiment was made to select the optimum thickness of the polyethylene (P.E) film for Cheongdo Bansi and Sagoksi in the P.E film storage kept at $0^{\circ}C$. The experimental plots were divided into 4 plots by film thickness (0.04, 0.06, 0.08 and 0.10mm) and those were subdivided into 3 plots by fruits number (3, 10 and 50 persimmons) in each film bags. We investigated five experimental items; the change of loss of weight, firmness, titratable acidity, sugar contents and soluble tannin contents. 1. In the changes of loss of weight, the plot of packing in 0.04mm P.E. film bag with 50 persimmons were more retarded than other plots in Cheongdo Bansi, and packing in 0.08mm with 10 persimmons, 0.04 mm with 50 persimmons were more retarded than other plots in Sagoksi. 2. In the change of softening, the plot of packing in 0.04 mm with 50 persimmons were more retarded than other plots in Cheongdo Bansi and Sagkai. 3. In the changes of titratable acidity, the plot of packing in 0.04 mm with 50 persimmons were more slightly decreased than other plots in Cheongdo Bansu also in Sagoksi, packing in 0.06 mm with 10 persimmons were the same results. 4. In the changes of soluble tannin contents, the plots of packing in 0.06 mm with 10 persimmons, 0.04 mm with 50 perimmons were more ratarded in Chenongdo Bansi, also in Sagoksi, packing in 0.04 mm with 10 persimmons 50 persimmons were the same results. 5. In the changes of soluble tannin contents, the plots of packing in 0.04mm with 3 and 10 persimmons were more slowly decreased than other plots in Cheongdo Bansi and Sagoksi, on. the other hand, pcaking in 0.04mm with 50 persimmins in Cheongdo Bansi and Sagoksi, had not astringent taste at 120 days in storage. Judging through the upper results, the most desirable storage conditions for Cheongdo Bansi and Sagoksi were to pack in P.E film bag of 0.04mm with 50 persimmons.

  • PDF

A Semantic Study on the Soundscape of the Historic Downtown of Daejeon - Focusing on the Bells of Daeheung-dong Cathedral and Enhang-dong Sungsimdang - (대전 원도심 소리풍경에 관한 의미론적 연구 - 대흥동 성당과 은행동 성심당 종소리를 중심으로 -)

  • Kim, Myeong-Shin
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.50 no.2
    • /
    • pp.64-75
    • /
    • 2022
  • The purpose of this study is to illuminate the meaning of the soundscapes of two bells, Daeheung-dong Cathedral and Sungsimdang in Eunghang-dong, which are landmarks and attractions in the historic downtown of Daejeon. The study was conducted through field research and recordings, as well as literature studies of related documents and soundscape theory. Daejeon city was developed along with Daejeon Railway Station during the Japanese colonial period in the early 20th century. As the Chungnam Provincial Office moved to Daejeon, Daeheung-dong and Eunhang-dong in Jung-gu, located near Daejeon Station, developed significantly and formed the city centre. As major administrative agencies moved to Seo-gu in the 1990s, the downtown area of Daejeon was on a path of decline, and the decline accelerated with the development of Sejong city. Meanwhile, Daeheung-dong Cathedral and Sungsimdang, founded by refugees during the Korean War, firmly protected the historic downtown area of Daejeon, where the natives left. Daeheung-dong Cathedral, established during the Japanese colonial period, is a local landmark with a history of 100 years in 2019. Sungsimdang, which was created with the backdrop of the Korean War, is also a historical and cultural asset with a history of 60 years and a local landmark selected as the No. 1 tourist attraction in Daejeon. This research, which started from the sound of the bells of Daeheung-dong Cathedral, heard even in the neighboring residential areas, led to the discovery of the bells of Sungsimdang in Eunhang-dong, located across the street. In this paper, the bells of Daeheung-dong Cathedral and Eunhang-dong Sungsimdang have characteristics of soundmarks according to R. Murray Schafer's soundscape sound category. Furthermore, this paper attempted to analyze the meaning of the two bells according to the relatively recent EU soundscape definition. These two bells are signal sounds at the surface level, but are the sound marks of the historic downtown area of Daejeon at the deep level. Although there are outward differences in size, scale, frequency, and famousness, these two bells share a meaning in terms of locality and good influence with the historicity and spatiality of a special relationship. The implication of this study is that the two places should be preserved as local historical and cultural assets not only as visual landmarks but also as sound marks in the urban regeneration or urban development of Jung-gu, Daejeon.

Comparison of Dissolved Ammonium Analytical Method in Seawater: Spetrophotometry and Fluorometry (해수 중 용존 암모늄 분석방법 비교: 분광광도법과 형광법)

  • SON, PURENA;PARK, JOONSEONG;RHO, TAEKEUN
    • The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
    • /
    • v.25 no.4
    • /
    • pp.81-96
    • /
    • 2020
  • Berthlot's reaction spectrophotometric method is generally used for the analysis of dissolved ammonium in seawater, but in recent years, a fluorescence method using an orthophthaldialdehyde-sulfite (OPA) fluorescent reagent is actively used internationally. In this study, we investigated the effects of the detection limit between the analysis methods, the reagent refractive index inherent in the spectrophotometric method, and the use of different calibration curves to understand the cause of the difference in dissolved ammonium concentration (about 0.31 𝜇M) observed in the seawater samples and a nutrient reference material between two institutions (KIOST (spectrophotometric method, one-order linear regression gradient only), Australia CSIRO (fluorescence method, quadratic formula)) conducted onboard the Australian R/V Investigator in 2017. The method detection limit (0.063 𝜇M) and the reagent refractive index background value (0.054 𝜇M) of the spectrophotometric method measured in this study could explain the difference in dissolved ammonium concentration values of the two institutes about 20% and 17%, respectively. However, when the concentration of the calibration curve of the spectrophotometric method was calculated using the same quadratic as the fluorescence method or the slope and intercept of linear regression, the difference in the dissolved ammonium concentration between the two institutions was reduced to less than the detection limit of the spectrophotometric method. Therefore, the difference in the concentration of dissolved ammonium between the two institutions, found in the nutrient reference materials and the seawater field sample during the international onboard nutrient inter-comparison experiment, may be attributed to be the effect of the different calibration curves used in the two methods rather than the effect of the difference in two analytical methods. When comparing the dissolved ammonium data from seawater samples in the future, it is recommended to pay attention to the information on the baseline, number of standard solutions, and calibration curve used in the analysis.

Implications of Shared Growth of Public Enterprises: Korea Hydro & Nuclear Power Case (공공기관의 동반성장 현황과 시사점: 한국수력원자력(주) 사례를 중심으로)

  • Jeon, Young-tae;Hwang, Seung-ho;Kim, Young-woo
    • Journal of Venture Innovation
    • /
    • v.4 no.2
    • /
    • pp.57-75
    • /
    • 2021
  • KHNP's shared growth activities are based on such public good. Reflecting the characteristics of a comprehensive energy company, a high-tech plant company, and a leading company for shared growth, it presents strategies to link performance indicators with its partners and implements various measures. Key tasks include maintaining the nuclear power plant ecosystem, improving management conditions for partner companies, strengthening future capabilities of the nuclear power plant industry, and supporting a virtuous cycle of regional development. This is made by reflecting the specificity of nuclear power generation as much as possible, and is designed to reflect the spirit of shared growth through win-win and cooperation in order to solve the challenges of the times while considering the characteristics as much as possible as possible. KHNP's shared growth activities can be said to be the practice of the spirit of the times(Zeitgeist). The spirit of the times given to us now is that companies should strive for sustainable growth as social air. KHNP has been striving to establish a creative and leading shared growth ecosystem. In particular, considering the positions of partners, it has been promoting continuous system improvement to establish a fair trade culture and deregulation. In addition, it has continuously discovered and implemented new customized support projects that are effective for partner companies and local communities. To this end, efforts have been made for shared growth through organic collaboration with partners and stakeholders. As detailed tasks, it also presents fostering new markets and new industries, maintaining supply chains, and emergency support for COVID-19 to maintain the nuclear power plant ecosystem. This reflects the social public good after the recent COVID-19 incident. In order to improve the management conditions of partner companies, productivity improvement, human resources enhancement, and customized funding are being implemented as detailed tasks. This is a plan to practice win-win growth with partner companies emphasized by corporate social responsibility (CSR) and ISO 26000 while being faithful to the main job. Until now, ESG management has focused on the environmental field to cope with the catastrophe of climate change. According to KHNP is presenting a public enterprise-type model in the environmental field. In order to strengthen the future capabilities of the nuclear power plant industry as a state-of-the-art energy company, it has set tasks to attract investment from partner companies, localization and new technologies R&D, and commercialization of innovative technologies. This is an effort to develop advanced nuclear power plant technology as a concrete practical measure of eco-friendly development. Meanwhile, the EU is preparing a social taxonomy to focus on the social sector, another important axis in ESG management, following the Green Taxonomy, a classification system in the environmental sector. KHNP includes enhancing local vitality, increasing income for the underprivileged, and overcoming the COVID-19 crisis as part of its shared growth activities, which is a representative social taxonomy field. The draft social taxonomy being promoted by the EU was announced in July, and the contents promoted by KHNP are consistent with this, leading the practice of social taxonomy