• Journal of Nutrition and Health
• /
• v.24 no.4
• /
• pp.308-313
• /
• 1991

This study attempted to measure subcutaneous fat thickness by the use of ultrasonic wave in age and sex matched Korean subjects, and to observe correlation between fat thick-ness and physical indices. In male, fat thickness of suprailiac area showed the highest value of $9.40{\sim}9.51mm$ and then subscapular was $6.60{\sim}6.84mm$, femoral was $6.48{\sim}7.04mm$ and triceps regions was $3.48{\sim}3.69mm$. In female, femoral subcutaneous fat thickness was the higher. $11.85{\sim}12.15mm$and then suprailiac was $8.79{\sim}9.87mm$ subscapular was $6.20{\sim}6.91mm$ and triceps fat thickness was $4.80{\sim}4.93mm$. In male, fat thickness of triceps and relative body weight(RBW). body mass index(BMI), triceps or $R\ddot{o}hrer$ index were positively correlated. Correlations between suprailiac and weight, relative body weight(RBW). body mass index(BMT), $R\ddot{o}hrer$ index or subscapular were positively significant. In female. there were positive correlations between fat thickness of femoral and RBW, BMI, or $R\ddot{o}hrer$ index. And there were no positive correlations in other parts of the body.

• The Journal of the Korean dental association
• /
• v.15 no.3
• /
• pp.205-208
• /
• 1977

The etiology of masseteric hypertrophy is obscure. When the hypertrophy occurs unilaterally it's appearance is more striking because of the resultant facial asymmetry. Two soldiers were admitted with the complaint of a lump on their jaws. The authors obtained good results on the esthetic & functional aspect in two cases of unilateral masseteric hypertrophy with the Adam's method. The etiology was thought to be the combination of unilateral masticatory and jaw clenching habits when emotionally disturbed or under nervous tension in army services.

• Proceedings of the Korea Society for Simulation Conference
• /
• 2001.10a
• /
• pp.325-328
• /
• 2001

This paper introduces a new technique to extract eigenvalues of the gain and phase offsets and to compensate them automatically in transducerless sampling RTU. It discusses in detail the cause of the offsets, describes the principles of gain and phase compensation, establishes the algorithm to extract eigenvalues. The process of using the compensated measurements is also illustrated in the paper. This technique enhances the operational speed, simplifies the operational complexity, and improves the capability of transducerless sampling in RTU.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1999.06a
• /
• pp.103.2-110
• /
• 1999

Facial model reconstruction and surgical simulation are essential parts in the computer-aided surgical system. Plastic surgeons use it to design appropriate repair plans and procedures before actual surgery is operated. In this work, the exploration of 3-D metamorphosis to them presents new results in these two parts.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.648-649
• /
• 2007

변전소의 설비 관리/진단 및 보호, 감시, 제어 등의 자동화 시스템인 SAS(Substation Automation System)의 운영에 있어서 가장 중요한 요인은 System의 신뢰성 확보라 할 수 있다. 즉, Real-time Data에 대한 정확하고 빠른 취득능력은 SAS의 평가 잣대가 될 수 있다. 따라서 SAS 운영의 신뢰성을 증대시키기 위해 상위 HMI(Human Machine Interface)와 하위 Device간의 통신 중계 역할을 하는 I/O Server의 Virtual Simulation Environment인 Hyosung 통합 I/O Server Toolkit(Virtual Device 포함)을 개발하였다.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.610-613
• /
• 1995

The effect of processing parameters such as milling, additives and sintering atmoshpere on the magnetic properties of Mn-Zn ferrite was investigated. The experiment was followed by general ceramic fabrication process and added additives were $CaCO_{3}$, $SiO_{2}$, $V_{2}O_{5}$, $ZrO_{2}$, and $Nb_{2}O_{5}$. The effects of additives could be divided into three categories which were formation ofliquid phase, substitution in lattice and inducing stress. Core loss smong the magnetic properties was dependent mainly on the additives and also correlated with processing parameters. As a result, an optimum condition of preparing process for a high quality Mn-Zn ferrite was suggested by controlling the correlation of each processing parameters.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.31 no.1
• /
• pp.1-10
• /
• 2023

This study investigated the accident cases of the U.S. Air Force and the R.O.K. Army. It analyzed the accident factors of the unmanned aircraft system using case analysis on unmanned aircraft system operators of the R.O.K. Air Force. Following the analysis this paper suggested safety operation plans for the R.O.K. Air Force. The risk factors of unmanned aircraft system were summarized by collecting and analyzing accident cases of unmanned aircraft system by the U.S. Air Force, collecting and analyzing accident risk factors of RQ-4 operators of the R.O.K. Air Force. Through the analyzed risk factors, a safety operation plan for the semi-automatic unmanned aircraft system and the fully automatic unmanned aircraft system was presented.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.7
• /
• pp.974-979
• /
• 2013

$TiO_2$ thin films are fabricated using R.F.sputtering method. $TiO_2$ thin films are coated on $Al_2O_3$ substrate printed IDE(interdigitated electrode). Impedance of thin films decreases according to increase relative humidity and it increases according to decrease measuring frequency. When substrate temperature is room temperature, impedance of thin films is from 45.68[MHz] to 37.76[MHz] within the limits from 30[%RH] to 75[%RH] at 1[kHz]. Whereas when substrate temperature is 100[$^{\circ}C$], impedance of thin films is from 692[kHz] to 539[kHz] within the limits from 30[%RH] to 75[%RH] at 1[kHz]. Impedance variation of thin films is bigger in low frequency regions than in high frequency regions. When substrate temperature is 100[$^{\circ}C$], impedance of thin films is lower than that of room temperature.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2172-2174
• /
• 2005

MgO has been used as the material of the protecting layer for AC PDP. AC PDP is influenced by characteristics of the surface glow discharge on the MgO thin film. Because MgO thin film is practically discharge electrodes, the discharge characteristics of MgO thin film should be varied with the method of deposition. In this study, changing order and time of deposition, we use electron beam evaporation system and R.F reactive magnetron sputtering system in the MgO deposition. Particularly, after using electron beam evaporation system, we use R.F. reactive magnetron sputtering system in the MgO deposition, then we could get lower amount of charge and higher luminance efficiency than only using electron beam evaporation system.

• Industry Promotion Research
• /
• v.3 no.2
• /
• pp.1-8
• /
• 2018

In this study, the reaction mechanism of ethane and the reaction rate equation suitable for hydrocarbon reforming were studied. Through the reaction mechanism analysis, it was confirmed that three reactions (CO2 + H2, C2H6 + H2, C2H6 + H2O) proceed during the reforming reaction of ethane, each reaction rate (CO2+H2($r=3.42{\times}10-5molgcat.-1\;s-1$), C2H6+H2($r=3.18{\times}10-5mol\;gcat.-1s-1$), C2H6+H2O($r=1.84{\times}10-5mol\;gcat.-1s-1$)) was determined. It was confirmed that the C2H6 + H2O reaction was a rate determining step (RDS). And the reaction equation of this reaction can be expressed as r = kS * (KAKBPC2H6PH2O) / (1 + KAPC2H6 + KBPH2O) (KA = 2.052, KB = 6.384, $kS=0.189{\times}10-2$) through the Langmuir-Hinshelwood model. The obtained equation was compared with the derived power rate law without regard to the reaction mechanism and the power rate law was relatively similar fitting in the narrow concentration change region (about 2.5-4% of ethane, about 60-75% of water) It was confirmed that the LH model reaction equation based on the reaction mechanism shows a similar value to the experimental value in the wide concentration change region.