• 대한기계학회논문집A
• /
• 제34권11호
• /
• pp.1733-1740
• /
• 2010

대형 드럼세탁기의 낙하 충격에 대한 포장재의 동적 거동 분석을 수행하였다. 해석에는 충격 해석에 널리 쓰이고 있는 LS-DYNA를 사용하였으며, 자유 낙하 시의 충격 가속도와 유효 응력, 그리고 고속 카메라를 통한 포장재 압축 변형 비교를 통해 해석 결과의 신뢰성을 검증하였다. 완충 특성 및 포장재 구조 에 대한 파라미터 분석을 통해 기존 포장 구조에 대한 설계 개선안을 도출하였으며, 유통 시험을 통해 유효성을 검증하였다. 본 연구에서 사용한 해석 기법 및 분석 방법 등을 통해, 향후 드럼 세탁기의 완충 성능 및 재료비 개선에 효과적으로 기여할 수 있을 것으로 기대된다.

• Journal of the Korean Data and Information Science Society
• /
• 제25권5호
• /
• pp.1039-1055
• /
• 2014

검정통계량의 영가설 분포는 모집단 분포에 의존하는데 모집단의 분포를 모를 때 영가설 분포를 검정통계량의 조건부 분포로 대체하여 검정하는 방법을 순열 검정이라고 한다. Strasser와 Weber (1999)는 순열 검정을 통합하는 이론을 마련하였고, Hothorn 등 (2006, 2008)은 그 이론을 R에 내장된 coin 패키지에 구현하였다. coin 패키지에서 조건부 독립성 검정은 총괄적인 형태의 함수인 independence test를 통해서 할 수 있지만 대표적인 독립성 검정은 사용자가 편리하도록 간편한 함수를 별도로 제공하고 있다. 본 논문에서는 Strasser와 Weber (1999)의 순열 검정 방법에 대해 소개하고, coin 패키지에 내장된 15개의 간편 함수에 대해 independence test 함수로 변환하는 절차를 설명하고자 한다. 또한, 정의한 independence test 함수를 써서 실제 자료의 점근 분포와 순열 검정, 정확 검정에 기초한 p-값을 서로 비교하고자 한다.

• 산업진흥연구
• /
• 제6권1호
• /
• pp.1-7
• /
• 2021

본 연구는 다층 퍼셉트론과 지도형 학습알고리즘에 대해 알아보았고, 아울러 neuralnet이라는 패키지를 사용하여 공변수들과 반응변수 간의 함수적 관계를 어떻게 모델링하는지 살펴보았다. 본 연구에서 적용된 알고리즘은 반응변수 값의 실제치와 예측치 간의 비교에 근거한 오차함수의 최소화를 위한 모수인 가중치들의 계속적인 조정을 특징으로 한다. 본 연구에서 설명하는 neuralnet 패키지는 활성화함수와 오차함수를 주어진 상황에 맞게 적절히 선택하고 나머지 매개변수들은 기본값으로 둘 수 있다. 본 연구에서 살펴본 불임 데이터에 대해 neuralnet 패키지를 활용한 결과 4개의 독립변수 중에서 age는 불임에 영향력이 거의 없음을 파악할 수 있었다. 아울러 신경망의 가중치는 -751.6부터 7.25에 이르기까지 다양한 값을 취하며, 첫 번째 은닉층의 절편은 -92.6과 7.25이며, 첫 번째 은닉뉴런으로 가는 공변수 age, parity, induced, spontaneous에 대한 가중치는 각각 3.17, -5.20, -36.82, -751.6임을 파악했다.

• 한국수소및신에너지학회논문집
• /
• 제35권3호
• /
• pp.324-335
• /
• 2024

The container package type sealed water electrolysis production system installs mechanical balance of plant and electrical balance of plant as an integrated unit to enable independent operation within the package module. The auxiliary equipment required to operate the water electrolysis system must be integrated to reduce the installation area and shorten the installation time. At this time, as leak risk factors are placed in a dense space, when a hydrogen gas leak accident occurs, it can have a mutual influence on other adjacent facilities, so it contains various risk factors. In this study, when a gas leak occurs in a container packaged water electrolysis system, possible sources of leakage in the system according to the KS C IEC 60079-10-1:2015 and KGS GC101 standards were identified, and the leak rate and leak characteristics were calculated. did. The hazardous area and its range were calculated according to ventilation and dilution characteristics. In order to optimize ventilation characteristics, design of experiment was used to analyze the influence to evaluate the adequacy of ventilation, and overseas ventilation standards were analyzed and compared. In addition, the optimal ventilation structure and characteristics of the container packaged water electrolysis system were presented according to the results of the experimental design method.

• 대한치과기공학회지
• /
• 제36권1호
• /
• pp.17-23
• /
• 2014

Purpose: The purpose of this study was to analyze and compare the relative accuracy of digitized stone models of lower full arch, using two different scanning system. Methods: Replica stone models(N=20) were produced from lower arch acrylic model. Twenty digital models were made with the white light and blue LED($Medit^{(R)}$, Korea) scanner. Two-dimensional distance between the landmarks were measured on the Delcam $CopyCAD^{(R)}$(Delcam plc, UK). Independent samples t-test was applied for comparison of the groups. All statistical analyses were performed using the SPSS software package(Statistical Package for Social Sciences for Windows, version 12.0). Results: The absolute disagreement between measurements made directly on the two different scanner-based dental digital models was 0.02~0.04mm, and was not statistically significant(P>0.05). Conclusion: The precision of the blue LED optical scanner was comparable with the digitization device, and relative accuracy was similar. However, there still is room for improvement and further standardization of dental CAD technologies.

• 한국광학회지
• /
• 제16권4호
• /
• pp.345-353
• /
• 2005

포토 다이오드(photodiode) 조정 방식을 이용해서, 비전 시스템을 장착한 고가의 정밀 자동 조립조정 장비 없이 홀로그램 픽업 모듈을 제작하는 새로운 방법을 제안하였다. 저가격화를 위해서 리드 프레임형의 반도체 레이저와 COB(Chip on Board)형의 포토 다이오드를 사용했고, 초점 에러 신호(focus error, FES) 검출방법은 스팟 사이즈 검출법(spot size detection, SSD), 트랙 에러 신호(tracking error, TES) 검출방법은 삼빔법(3 beam method)을 이용했다. 이를 만족하는 픽업 홀로그램 모듈 광학계를 설계하고, 조립조정 프로세스 수립 및 시스템을 제작하였으며, 조립된 홀로그램 모듈을 이용하여 CD에서 데이터를 검출하는 실험을 통해 제안된 포토 다이오드 조정방식의 유용함을 입증하였다.

• 대한인간공학회지
• /
• 제17권3호
• /
• pp.1-11
• /
• 1998

Focuses of this study are to investigate the usage status of head-restraint system(H/R) in usual driving and to simulate usage conditions of H/R at rear-end crashes. The usage of H/R was categorized into five classes according to the height and distance from occupant's head ; Large-$90^{\circ}$ H/R for enough height and short distance. Large-$70^{\circ}$ H/R for enough height and long distance. Small-$90^{\circ}$ H/R for low height and short distance. Small-$70^{\circ}$ H/R for low height and long distance. and No H/R. Then. these five conditions were tested to find out the degree of neck injuries by using a car-crash simulation package, DYNAMAN. Results from the investigation of H/R usage show that most of drivers(60%) have Small-$70^{\circ}$ H/R for low height and long distance. Results from the simulation performed at 15mph and 30mph show that: 1) at 15 mph, there is a possibility for neck injury in Small-$90^{\circ}$ H/R and Small-$70^{\circ}$ H/R. 2) at 30 mph. there is a high possibility of death in Small-$70^{\circ}$ H/R and Small-$90^{\circ}$ H/R.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.614-615
• /
• 2005

The use of plastic substrates enables new applications, such as flexible display devices, and other flexible electronic devices, using low cost, roll-to-roll (R2R) fabrication technologies. One of the limitations of polymeric substrate in these applications is that oxygen and moisture rapidly diffuse through the material and subsequently degrade the electro-optical devices. GE Global Research (GEGR) has developed a plastic substrate technology comprised of a superior high-heat polycarbonate ($LEXAN^{(R)}$) substrate film and a unique transparent coating package that provides the ultrahigh barrier (UHB) to moisture and oxygen,chemical resistance to solvents used in device fabrications, and a high performance transparent conductor. This article describes the coating solutions for polycarbonate ($LEXAN^{(R)}$) films and its compatibility with OLED device fabrication processes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.882-884
• /
• 2003

In this paper, thermal analysis of Cubicle type Gas Insulated Switchgear(C-GIS) was investigated through experiments and numerical analysis. To predict 3-dimensional temperature and velocity distribution, the commercial package was used. Although some assumptions and simplifications were introduced to simulate the model, results from the computational model were in good agreement with actual temperature rise measurements obtained from experiments.

• 대한인간공학회지
• /
• 제21권2호
• /
• pp.47-58
• /
• 2002

This research suggested the mathematical model (forward kinematics method) to provide the reference points of driver space more easily and accurately in designing the package layout of vehicle interiors. For this purpose, the lengths of body segments of drivers and various joint angles occurred while were used. The length data between joints for the mathematical model were extracted from $SAFEWORK^{\circed{R}}$ as well as 95th percentile male and 5th percentile female body dimensions were utilized. In addition, the angles of body segments were applied on its diverse values within proper ranges in order to compare them each other. the mathematical model in this study was based on the concept of converting polar coordinate system to Cartesian coordinate system so that reference points of driver space were acquired in Cartesian coordinate system after using the segment lengths of drivers and the joint angles of driving postures as an input of polar coordinate system. It is expected that reference points of driver space obtained from this research are helpful to the study on package layout that is appropriate for physical characteristics of drivers.