• The Journal of the Petrological Society of Korea
• /
• v.26 no.3
• /
• pp.297-309
• /
• 2017

Jurassic granite from Geochang was analysed with respect to the characteristics of the rock cleavage. The comprehensive evaluation for rock cleavages was performed through the combination of the 16 parameters derived from the enlarged photomicrographs of the thin section and the spacing-cumulative frequency diagrams. The results of analysis for the representative values of these spacing parameters with respect to the rock cleavage are summarized as follows. First, the above parameters can be classified into group I (spacing frequency (N), total spacing ($1m{\geq}$), constant (a), exponent (${\lambda}$), slope of exponential straight line (${\theta}$), length of line (oa') and trigonometric ratios ($sin{\theta}$, $tan{\theta}$) and group II (mean spacing (Sm), difference value between mean spacing and median spacing (Sm-Sme), density (${\rho}$), lengths of lines (oa and aa'), area of a right-angled triangle (${\Delta}oaa^{\prime}$) and trigonometric ratio($cos{\theta}$). The values of the 8 parameters belonging to group I show an order of H(hardway, H1+H2)

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.218-221
• /
• 2008

Hot Press Forming (HPF), an advanced sheet forming method in which a high strength part can be produced by forming at high temperature and rapid cooling in dies, is one of the most successful forming process in producing components with complex geometric shape, high strength and a minimum of springback. In order to obtain effectively and accurately numerical finite element simulations of the actual HPF process, the flow stress of a boron steel in the austenitic state at elevated temperatures has been investigated with Gleeble system. To evaluate the formability of the thermo- mechanical material characteristics in the HPF process, the FLDo defined at the lowest point in the forming limit diagrams of a boron steel has been investigated. In addition, the simulation results of thermo-mechanical coupled analysis of an automobile one-piece lower-arm part are compared with the experimental ones to confirm the validity of the proposed simulations.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.129-134
• /
• 2013

Previous research is focus on testcase generation automation using message sequence diagram based on metamodel. but that research is not enough for testcase genaeration automation using state diagram based metamodel. so in this paper is adopt Model Driven Architecture (MDA) mechanism for using metamodel and model transformation. and we suggest testcase automation mechanism using state diagram in UML. we will decrease cost of embedded software design and testcase genaration and increase quality of embedded software using metamodel mechanism.

• Journal of The Korean Astronomical Society
• /
• v.32 no.2
• /
• pp.109-117
• /
• 1999

UBVI CCD photometry has been obtained for a region around the Wolf-Rayet star WR 12. We found two young stellar associations in the observed field: the nearer one comprises the field members of Vela OBI association at d = 1.8kpc, while the farther one is the young open cluster Bochum 7 (Bo 7) at d = 4.8kpc. The stars associated with Bo 7 showed no central concentration which suggests that Bo 7 is not a young open cluster but simply a local concentration in the density of young stars belonging to the OB association (Vel OB3). These two associations have similar ages but remarkably different mass function slopes ($\Gamma$ = -2.1 $\pm$ 0.3 for Vel OBI and -1.0 $\pm$ 0.3 for Bo 7). The stars in Vel OBI shows an evident age spread (${\Delta}T\~ 9Myr$). We also found two strong H$\alpha$ emission stars - WR 12 and $\sharp$1066 - from narrow band H$\alpha$ photometry.

• Korean journal of applied entomology
• /
• v.32 no.1
• /
• pp.68-75
• /
• 1993

Morphometric investigations of the leg characters of both sexes of brachypterous Korean N. lugens biotypes were made. Simple and multivariate statistical analyses revealed that the three N. lugens biotypes differed from one another. The amount of variation and segregation between and among the three biotype populations were approximated by the scatter plot diagrams based on the computed discriminant scores. The variables of leg characters provided the most significant segregations of three biotype populations, thus, categorizing the three biotypes as distinct intraspecific populations of N. lugens.

• Journal of the Korean Magnetic Resonance Society
• /
• v.10 no.1
• /
• pp.74-88
• /
• 2006

Since the first commercial NMR spectrometer came out in 1953 from Varian, much of the hardware development has been improved and matured through commercial equipments. Many of magnetic resonance laboratories however still build and use home-built spectrometers, which are satisfactory even with the consideration of educational purpose only. The home-built NMR spectrometer could be further advantageous and could be often an only option for investigating new ideas with demanding experimental conditions or new hardware support. A solid state NMR spectrometer was designed with extra interest in stochastic experiment and built for an 8.93 T superconducting magnet from Oxford instrument. Super-heterodyned system was implemented for the transmitter and receiver parts. Intermediate frequency (IF) for the heterodyne system was chosen to 70 MHz for the first and the second channels, with additional 120 MHz for the third channel for maximum NMR frequency capability. We will show overall schematics, and discuss the designs with detailed diagrams, then demonstrate the applicability of home-built spectrometer with stochastic-excitation in solid state NMR and in applications to quadrupolar nuclear Spins.

• Computers and Concrete
• /
• v.10 no.6
• /
• pp.649-662
• /
• 2012

This paper presents the results of an investigation on the compressive strength and weight loss of mortars containing three types of fillers as cement replacements; Limestone Filler (LF), Silica Fume (SF) and Trass (TR), subjected to elevated temperatures including $400^{\circ}C$, $600^{\circ}C$, $800^{\circ}C$ and $1000^{\circ}C$. Results indicate that addition of TR to blended cements, compared to SF addition, leads to higher compressive strength and lower weight loss at elevated temperatures. In order to model the influence of the different parameters on the compressive strength and the weight loss of specimens, artificial neural networks (ANNs) were adopted. Different diagrams were plotted based on the predictions of the most accurate networks to study the effects of temperature, different fillers and cement content on the target properties. In addition to the impressive RMSE and $R^2$ values of the best networks, the data used as the input for the prediction plots were chosen within the range of the data introduced to the networks in the training phase. Therefore, the prediction plots could be considered reliable to perform the parametric study.

• Journal of Pharmaceutical Investigation
• /
• v.39 no.6
• /
• pp.417-422
• /
• 2009

Budesonide belongs to Class II in the Biopharmaceutics Classification System (BCS) for its high permeability and poor aqueous solubility. The purpose of this study was to improve the solubility and dissolution rate of budesonide using an o/w microemulsion system in order to develop a nasal formulation. Based on the results of the solubility study and pseudo ternary phase diagrams, microemulsions of about 80 nm in mean diameter were formulated using isopropyl myristate and Labrasol$^{(R)}$ as an oil phase and a surfactant, respectively. Solubility of budesonide in the microemulsions increased up to 6.50 mg/mL, which is high enough for a nasal formulation. In vitro release profiles of budesonide significantly increased from the microemulsions compared to that of the budesonide powder. These results suggest that the microemulsions of budesonide could further be developed into a clinically useful nasal formulation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.23 no.11 s.170
• /
• pp.2022-2032
• /
• 1999

In recent years, the subject of remaining life assessment has drawn considerable attention in the power generation industry. In power generation systems a variety of structural components, such as steam pipes, turbine rotors, and superheater headers, typically operate at high temperatures and high pressures. Thus a life prediction methodology accounting for fracture and rupture is increasingly needed for these components. For accurate failure assessment, in addition to the single parameter such as K or J-integral used in traditional fracture mechanics, the second parameter like T-stress describing the constraint is needed. The most critical defects in such structures are generally found in the form of semi-elliptical surface cracks in the welded piping-joints. In this work, selecting the structures of surface-cracked plate and straight pipe, we first perform line-spring finite element modeling, and accompanying elastic-plastic finite element analyses. We then present a framework for including constraint effects (T-stress effects) in the R6 failure assessment diagram approach for fracture assessment.

• Journal of The Korean Astronomical Society
• /
• v.43 no.5
• /
• pp.141-152
• /
• 2010

UBV I CCD photometry is obtained for the open clusters NGC 4609 and Hogg 15 in Crux. For NGC 4609, CCD data are presented for the first time. From new photometry we derive the reddening, distance modulus and age of each cluster - NGC 4609 : E(B-V ) = $0.37{\pm}0.03$, $V_0-M_V=10.60{\pm}0.08$, log $\tau$= 7.7 $\pm$ 0.1; Hogg 15 : E(B - V ) = 1.13 $\pm$ 0.11, $V_0-M_V$ = 12.50 $\pm$ 0.15, log $\tau$ $\lesssim$ 6.6. The young age of Hogg 15 strongly implies that WR 47 is a member of the cluster. We also determine the mass function of these clusters and obtain a slope $\Gamma$ = -1.2 ($\pm$0.3) for NGC 4609 which is normal and a somewhat shallow slope (${\Gamma}=-0.95{\pm}0.5$) for Hogg 15.