• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1383-1385
• /
• 2008

In the viewing-angle image control (VIC) technology, one pixel is made up of a quad pixel structure which is consisting of R, G, B, and electrically control briefringence (ECB) sub-pixels. Two types of test stimuli were used; text & complex image respectively. The limitations of those methods were found from the experiment. From the results the advanced GC technology was proposed.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.117-121
• /
• 2005

In this paper, an approximate time-effective approach to rigid-plastic finite element method is presented with its solution scheme and a volume compensation method is proposed to simulate rotary forging processes. The applicability is examined by comparing the results obtained by the presented approach with those by the conventional approach. The approach is applied to simulation of a rotary forging process fur a wheel bearing assembly. The analyzed results are compared with the experimental results.

• 한국산학기술학회논문지
• /
• 제13권3호
• /
• pp.1263-1269
• /
• 2012

본 논문은 광 통신용 CWDM(Coarse Wavelength Division Multiplexing) 광 송수신기 레이저에 히터를 내장시켜 저온 파장을 보상하기 위한 연구이다. 일반적으로 DFB(Distributed Feedback) 레이저 파장의 온도 변화량은 약 $0.1nm/^{\circ}C$ 정도이다. 즉 온도가 올라가면 파장도 올라가고, 온도가 내려가면 파장도 내려간다. 따라서 각 채널별 기준 중심 파장간의 간격이 20 nm인 CWDM 광 통신망에서는 근접 채널 간의 파장 간섭을 막기 위해서 동작 온도 범위를 넓힐 수 없는 문제를 갖고 있다. 이를 보완하기 위해 히터를 CWDM LD(Laser Diode) TO-CAN 패키지 바닥면에 부착하여 저온에서의 파장을 보상할 수 있다. 따라서 이를 이용해서 산업용 광 송수신기 동작 온도 범위인 $-40{\sim}+85^{\circ}C$에서 기준 파장대비 +/-6.5 nm 변화폭에 만족시킬 수가 있었다.

• Journal of Power Electronics
• /
• 제9권2호
• /
• pp.232-242
• /
• 2009

In this paper, a matrix converter with improved low frequency output performance is proposed by achieving a one-step commutation owing to a general commutation circuit applicable to n-phase to m-phase matrix converters. The commutation circuit consists of simple resister and capacitor components, leading to a very stable, reliable and robust operation. Also, it requires no extra sensing information to achieve commutation, allowing for a one-step commutation like a conventional dead time commutation. With the dead time commutation strategy applied, the distortion caused by commutation delay is analyzed and compensated, therefore leading to better output linear behavior. In this paper, detailed commutation procedures of the R-C commutation circuit are analyzed. A selection of specific semiconductor switches and commutation circuit components is also provided. Finally, the effectiveness of the proposed commutation method is verified through a two-phase to single-phase matrix converter and the feasibility of the compensation approach is shown by an open loop space vector modulated three-phase matrix converter with a passive load.

• 말소리와 음성과학
• /
• 제2권3호
• /
• pp.81-89
• /
• 2010

Korean and three other languages (English, Arabic, and Japanese) were compared with regard to the compensatory movements in a VC (Vowel and Consonant) sequence and word. For this, Korean data were collected from an experiment and the other languages' data from literature. All the test words of the languages had the same syllabic contexture, i.e., /CVCV(r)/, where C was an oral stop and intervocalic consonants were either bilabial or alveolar stops. The present study found that (1) Korean is most striking in the durational variations of segments (vowel and the following hetero-syllabic consonant); (2) unlike the three languages that show a constant sum of VC, Korean yields a three-way distinction in the length of VC according the type (lax unaspirated vs. tense unaspirated vs. tense aspirated) of the following stop consonant; (3) a durational constancy is maintained up to the word level in the three languages, but Korean word duration varies as a function of the feature tenseness of the intervocalic consonants; (4) consonant duration is proven to differentiate Korean the most from the other languages. It is suggested that the durational difference between a lax consonant and its tense cognate(s) and the degree of compensation between V and C are determined by the phonology in each language.

• 한국산업보건학회지
• /
• 제29권1호
• /
• pp.42-49
• /
• 2019

Objective: Chronic obstructive pulmonary disease(COPD) is characterized by persistent airflow limitations associated with chronic inflammatory response due to noxious particles or gases in the lung. Iron deficiency is associated with chronic inflammation, such as COPD. The aim of this study was to evaluate the relationship among iron deficiency, iron homeostasis, and inflammation in retired miners with COPD. Methods: The serum levels of ferritin, soluble transferrin receptor(sTfR), and transferrin saturation(TSat) as biomarkers for iron deficiency and high-sensitivity C-reactive protein(hsCRP) as a biomarker for inflammation and hepcidin as a biomarker for iron homeostasis were measured in 93 male subjects. Iron deficiency was defined as any one or more of (1) sTfR>28.1 nmol/L, (2) TSat<16%, and (3) ferritin< $12{\mu}g/L$. Results: Iron deficiency was found 28% of the study subjects. Median levels of serum hsCRP was significantly increased related to airflow limitation of COPD(GOLD 1, $0.09{\mu}g/dL$ vs. GOLD 2, $0.17{\mu}g/dL$ vs. GOLD $3{\leq}$, $0.30{\mu}g/dL$, p=0.010), and was positively correlated with hepcidin(p=0.009). Mean level of serum hepcidin was lower in COPD subjects with iron deficiency(p=0.004) and serum levels of hepcidin was negatively correlated with %$FEV_1$ predicted(p=0.030). Conclusions: These results suggest that high serum levels of hepcidin are related to severe airflow limitation or inflammation and can decrease iron availability, regardless of iron status.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.914-917
• /
• 2002

We have obtained high performance and low voltage driving OCB panel by reducing the critical voltage and retardation matching between liquid crystal layer and compensation films. The critical voltage in the panel has been minimized by flattening color filter layer and optimizing a rubbing process. In addition, an appropriate retardation of the film and LC layer has scanned to achieve low driving voltage and high transmission. The proto-type 17" WXGA OCB panel has demonstrated with less than 5V drive and over 80 degree for all viewing direction except for rubbing direction with over 90% of TN light efficiency.

• Investigative Magnetic Resonance Imaging
• /
• 제13권1호
• /
• pp.15-21
• /
• 2009

목적 : 나선 주사 영상에서 경사자계시스템의 회로 모델을 기반으로 실제 경사 자계를 추정하여 재구성에 사용함으로써 재구성 영상을 개선하는 방법을 제안하였다. 대상 및 방법 : 자기공명영상장치의 경사자계 시스템은 저항 성분과 자체 인덕턴스, magnet 시스템과의 상호 인덕턴스, 커패시턴스 성분 등을 가지고 있어서 경사자계 증폭기에 인가하는 입력 경사자계 파형과 실제 만들어지는 경사자계 사이에는 시간적인 지연과 함께 파형에도 차이가 있다. 나선주사 영상에서 실제 만들어진 경사자계 파형 및 k-space 궤적은 재구성 과정에서 매우 중요한 역할을 한다. 본 논문에서는 경사자계시스템을 회로 소자로 모델링하였고, 입력 전압 파형에 대한 출력 전류 파형을 구함으로써 실제 얻어지는 경사자계파형을 유도하였다. 모델링에서 사용한 R-L-C 값은 재구성영상의 화질로부터 얻을 수 있는 방법을 제시하였다. 결과 : 1.5 Tesla MRI 시스템에서 경사자계 시스템의 입력 전압 파형에 대하여 실제 얻어지는 경사자계 파형을 추정할 수 있었다. 경사자계파형을 적분함으로써 얻어진 나선 궤적을 재구성에 적용한 결과 재구성 영상의 균일도가 개선되었고, edge 부근에서 overshoot 가 줄어들었으며, 해상도가 향상된 영상을 얻을 수 있었다. 결론 : R-L-C 회로 모델을 이용하여 경사자계시스템을 성공적으로 모델링할 수 있었고, 입력 전압 파형에 대하여 실제 얻어지는 경사자계(전류) 파형을 추정할 수 있었다. 이로부터 얻은 kspace 나선 궤적을 이용하여 월등히 개선된 재구성영상을 얻을 수 있었다.

• 한국광학회지
• /
• 제27권3호
• /
• pp.106-113
• /
• 2016

본 논문에서는 37채널을 갖는 적응광학계용 SiC(Silicon Carbide) 변형거울의 파면 보상 성능 검증에 관한 내용을 다룬다. 컴퓨터 시뮬레이션을 통해 SiC 변형거울의 파면 보상 성능을 예측하였고, 실제 closed-loop 적응광학계를 구성하여 파면 보상 성능을 확인 하였다. Closed-loop 적응광학계는 광원, 위상판, SiC 변형거울, 고속 샥-하트만 센서 그리고 제어용 컴퓨터로 구성되어있다. 회전하는 위상판에 의해 왜곡된 파면을 샥-하트만 센서로 측정하고, SiC 변형거울을 이용하여 왜곡된 파면을 보상해주는 시스템이다. 결과적으로 closed-loop 적응광학계에서 500 Hz의 속도로 PV(Peak-to-Valley) $0.3{\mu}m{\sim}0.9{\mu}m$, RMS(Root-Mean-Square) $0.06{\mu}m{\sim}0.25{\mu}m$의 왜곡된 파면을 PV $0.1{\mu}m$, RMS $0.03{\mu}m$이하로 보상시킬 수 있었다.

• 한국정밀공학회지
• /
• 제21권9호
• /
• pp.167-173
• /
• 2004

The heterodyne He-Ne laser interferometer is the most widely used sensing unit to measure the position error. It measures the positioning error from the displacement of a moving reflector in terms of the wave length. But, the wave length is affected by the variation of atmospheric temperature. Temperature variation of 1$^\circ C$ results in the measuring error of 1ppm. In this paper, for measuring more accurately the position error of the ultra precision stage, the refractive index compensation method is introduced. The wave length of the laser interferometer is compensated using the simultaneously measured room temperature variations in the method. In order to investigate the limit of compensation, the stationary test against two fixed reflectors mounted on the zerodur$\circledR$ plate is performed firstly. From the experiment, it is confirmed that the measuring error of the laser interferometer can be improved from 0.34${\mu}m$ to 0.11${\mu}m$ by the application of the method. Secondly, for the verification of the compensating effect, it is applied to estimate the positioning accuracy of an ultra precision aerostatic stage. Two times of the refractive index compensation are performed to acquire the positioning error of the stage from the initially measured data, that is, to the initially measured positioning error and to the measured positioning error profile after the NC compensation. Although the positioning error of an aerostatic stage cannot be clarified perfectly, it is known that by the compensation method, the measuring error by the laser interferometer can be improved to within 0.1${\mu}m$.