• 한국농공학회지
• /
• 제33권2호
• /
• pp.94-103
• /
• 1991

This study was carried out to investigate the engineering characteristics of the R.C circular ring sector plate with various boundary conditions and then to propose a rational and paraical method for application of finite element method to R.C structures. The stiffness matrix of the circular ring sector plate was obtained by using the multi-base coordinate system in which the base-coordinate systems were constructed for each nodal point of the quadrilateral element in order to reflect the complicated boundary conditions conveniently and correctly. The R.C element stiffness matrix was constructed by adding the stiffness coefficients of the steel-bar element into the plate bending element stiffness matrix. Herein, the steel-bar element was treated as the common beam element. Using the above method, the effects of steel-bar can be considered without increasing of the numbers of element and nodal points.

• 대한수학회지
• /
• 제59권5호
• /
• pp.945-962
• /
• 2022

For a positive integer ℓ, $\bar{A}_{\ell}(n)$ denotes the number of over-partitions of n into parts not divisible by ℓ. In this article, we find certain Ramanujan-type congruences for $\bar{A}_{r{\ell}}(n)$, when r ∈ {8, 9} and we deduce infinite families of congruences for them. Furthermore, we also obtain Ramanujan-type congruences for $\bar{A}_{13}(n)$ by using an algorithm developed by Radu and Sellers [15].

• 한국산학기술학회논문지
• /
• 제12권12호
• /
• pp.5838-5842
• /
• 2011

본 연구는 고용량의 모터를 구동하기 위한 모터컨트롤센터(MCC)의 내부 구조 중 각 상(R,S,T)의 BUS BAR의 온도와 BUS BAR 볼트 체결부의 온도변화가 모터컨트롤센터의 노후화 및 진동에 따라 어떠한 차이가 있는지를 적외선 온도센서가 설치된 온도측정용 2차원 기구부를 설계 제작하고 모터컨트롤센터의 내부에 설치하여 BUS BAR의 온도 및 전류 변화량을 상시 모니터링 하였다. 실험을 통하여 부하에 따른 BUS BAR의 온도 변화를 BUS BAR 나사 체결부위를 중심으로 측정하였으며, BUS BAR의 온도변화와 소모 전류에 대한 비례관계를 확인할 수 있었다. 또한 이러한 비접촉식 2차원 온도측정 시스템을 모터컨트롤센터 내부에 장착하면 부하의 과전류로 인한 온도 상승이나 접촉 불량 등으로 발생될 수 있는 정전이나 화재 사고를 예방할 수 있을 것으로 기대된다.

• 한국응용곤충학회지
• /
• 제20권1호
• /
• pp.37-41
• /
• 1981

콩의 흑색뿌리썩음병을 일으키는 Cylindrocladium crotalariae은 감자한천배지와 콩의 조직을 함유한 한천 배지를 서로 다르게 Water potential를 조절하여 이 병원균을 접종한 결과 균사신장과 대형분생포자형성은 -14bars에서 좋았고 $30^{\circ}C$에서는 -100bars $25^{\circ}C$에서는 -80bars $20^{\circ}C$에서는 -64bars에서 균사신장이 중지되었으며 포자형성도 -64bars에서 중지되었다. 자낭각과 미소균핵형성은 소금을 첨가하지 않은 -1.4나 -3.0bars에서 잘 되었고 이 균에 대한 포자발아율은 -1.4bars에서 -20bars의 모든 Water potential에서 똑 같이 좋았고 -20bars에서 Water potential이 낮아지므로 발아율이 떨어지다가 -60bars에서 억제되었다.

• 대한수학회보
• /
• 제32권2호
• /
• pp.179-189
• /
• 1995

Let $V \subset R^n$ be a convex homogeneous cone which does not contain straight lines, so that the automorphism group $$ G = Aut(R^n, V)^\circ = { g \in GL(R^n) $\mid$ gV = V}^\circ $$ ($\circ$ denoting the identity component) acts transitively on V. A convex cone V is called "self-dual" if V coincides with its dual $$ (1.1) V' = { x' \in R^n $\mid$ < x, x' > > 0 for all x \in \bar{V} - {0}} $$ where $\bar{V}$ denotes the closure of V.sure of V.

• 한국토양비료학회지
• /
• 제48권6호
• /
• pp.712-723
• /
• 2015

This study was conducted to develop the SWCC estimation equation using scaling technique, and to investigate relative sensitivity of the SWCC according to the soil water tension, for the four kinds of soil texture such as Sand [S], Sandy Loam [SL], Loam [L] and Clay Loam [CL]. The SWCC estimation equation of scale factor [${\Theta}sc$] (Eq. 1) was developed based on the log function (Eq. 2) and exponential function (Eq. 3). ${\Theta}sc=[({\Theta}-{\Theta}r)/({\Theta}s-{\Theta}r)]$ (Eq. 1) ${\Theta}sc=-0.196ln(H)+0.4888$ (Eq. 2) ${\Theta}sc=0.3804(H)^{(-0.448)}$ (Eq. 3) where, ${\Theta}$: water content (g/g %), ${\Theta}s$: water content at 0.1bar, ${\Theta}r$: water content at 15bar, H: soil water tension (matric potential) (bar) Relative sensitivity of soil water content was decreased as increase soil water tension, those according to soil water tension were 0.952~0.620 compared to 0.1bar case. Relative sensitivity of scale factor was also decreased as increase soil water tension, those according to soil water tension were 0.890~0.577 compared to 0.2bar case.

• Structural Engineering and Mechanics
• /
• 제83권6호
• /
• pp.799-810
• /
• 2022

This study investigated the effect of the strengthening efficiency of unbonded steel-bar truss system on the out-of-plane behavior of perforated masonry walls. Four full-scale unreinforced masonry (URM) walls with two different planes were prepared using the unbonded steel-bar truss system and a URM walls without strengthening. All masonry walls were tested under constant axial and cyclic lateral loads. The obtained test results indicated that the pinching effect in the out-plane behavior of masonry walls tends to decrease in the in- and out-of-plane strengthened URM walls using the unbonded steel-bar truss system with the higher prestressing force ratio (R_p) of vertical reinforcing bars in the unbonded steel-bar truss system, regardless of the perforated type of the masonry wall. Consequently, the highest maximum shear resistance and cumulative dissipated energy at peak load in the post-peak behavior were observed in the in- and out-plane strengthened URM walls with the highest R_p values, which are 2.7 and 6.0 times higher than those of URM. In particular, the strengthening efficiency of the unbonded steel-bar truss system was primarily attributed to the vertical prestressed steel-bars rather than the diagonal steel-bars, which indicates that the strains in the vertical prestressed steel-bars at the peak load were approximately 1.6 times higher than those in the diagonal steel-bars.

• 한국정밀공학회지
• /
• 제27권3호
• /
• pp.95-103
• /
• 2010

Roll to Roll (R2R) is one of the most promising production technologies in the printed electronics such as OLEDs, e-paper, backplanes, RFID because this technology can save production cost and increase production speed. Printed electronics includes various processes such as printing, drying, winding, unwinding, and so on. In printed electronics R2R system, air-flotation oven is employed for drying process. Therefore, it is essential to introduce efficient and fast drying process when printing is finished. This paper considers the analysis of drying process in R2R that involves hot air flow. Air-flotation oven consists of non-contact supports and drying of coated web materials such as plastic films and paper. In this paper, experimental results and numerical analysis of pressure-pad air bar are investigated. The aerodynamic characteristics of pressure-pad air bar are numerically calculated using computational fluid dynamics (CFD) approach. Then the measured values of the aerodynamic forces for air bars are compared with those of CFD analysis.

• 한국가스학회지
• /
• 제17권5호
• /
• pp.1-7
• /
• 2013

수소와 압축천연가스가 30 : 70비율로 혼합되는 HCNG 공급 시스템의 공정모사를 수행하였다. 수소 생산은 천연가스로부터 수증기 개질 공정을 이용하는 방법이며, 수증기 개질반응기 운전조건으로 SCR은 증가할수록 천연가스의 전환율은 증가하지만 SCR이 3이상부터는 큰 차이가 없었고, GHSV는 증가할수록 연료처리량이 증가하지만 전환율은 감소하여 $1700h^{-1}$일 때 전환율 및 연료처리량이 최적상태가 되었다. CNG는 저압 천연가스가로부터 압축되어 공급되는 시스템이다. 혼합용 수소와 천연가스는 고압상태에서 HCNG로 혼합된다. 수소와 천연가스는 각각 400 bar와 250 bar의 고압으로 압축된다. 고압압축을 위해 단일압축보다 압축소요동력이 적게 사용되는 다단 압축을 사용하였다. 수소와 천연가스압축에 각각 사용된 압축기들의 압축 총 소요 동력을 최소화하는 중간 설정압력으로 각각 61 bar, 65 bar의 중간압력을 도출하였다.

• 한방비만학회지
• /
• 제12권2호
• /
• pp.44-55
• /
• 2012

Objectives: The purpose of this study is to investigate biological effects of Euiiin-tang(Y$\grave{i}$y$\check{i}$r$\acute{e}$n-t$\bar{a}$ng) extracts by extraction methods. Methods: To investigate the effects of anti-oxidative and anti-inflammatory activity, we measured DPPH radical scavenging assay, collagenase inhibition assay and COX-2 inhibition assay. Results: In case of measuring anti-oxidative and anti-inflammatory activities of Euiiin-tang(Y$\grave{i}$y$\check{i}$r$\acute{e}$n-t$\bar{a}$ng) by collagenase and COX-2 inhibition activity, it came out that Euiiin-tang(Y$\grave{i}$y$\check{i}$r$\acute{e}$n-t$\bar{a}$ng) was unable to inhibit collagenase, but was effective to inhibit COX-2. Cytotoxicity analysis of Euiiin-tang(Y$\grave{i}$y$\check{i}$r$\acute{e}$n-t$\bar{a}$ng) extracts by MTT assay principles, there was no cytotoxicity in aqueous and 50% ethanol extracts in any level of concentration. Conclusions: This results suggest that Euiiin-tang(Y$\grave{i}$y$\check{i}$r$\acute{e}$n-t$\bar{a}$ng) extracts have anti-oxidative and anti-inflammatory activities.