• Applied Biological Chemistry
• /
• 제32권4호
• /
• pp.401-407
• /
• 1989

생리활성을 갖는 신규물질 탐색의 일환으로 1,3 치환 -5-chloropyrazole-4-carbonyl chloride를 합성한 뒤 8종의 aldoxime 또는 ketoxime과 친핵 반응시켜 15종의 pyrazole-oxime ester를 얻었으며, 이들의 구조를 $^1H,\;^{13}C-NMR$ 및 IR 등으로 확인하였다. 이 유도체들의 R. solani, P. oryzae, B. cinerea, P. graminearum, P. capsici 및 G. cingulata에 대한 균사생육억제효과를 검정한 결과, oxime 부위$(R^3)$가 친전자성기로 치환된 방향족인 경우가(III, XIII, XIV) 포화알킬기인 경우보다 우수한 효과를 보여주었다.

• Journal of Pharmaceutical Investigation
• /
• 제38권6호
• /
• pp.393-398
• /
• 2008

A propofol delivery system was prepared using two biocompatible polymeric surfactants, poloxamer 407 and PEG 400. The nanoparticular stability of the micellar system was evaluated in terms of temperature change, storage time and composition. The particle size of the system was slightly increased with elevating temperature from $4^{\circ}C$ to $25^{\circ}C$, but its distribution was unimodal. At $40^{\circ}C$, the system presented a bimodal particle size distribution and the increase in the fraction of particles larger than 15 nm. This result might be due to the expansion of the nanoparticles through micellar swelling at the high temperature. It was found that propofol was gradually come out of the system, stored for a month at three different temperatures (4, 25 and $40^{\circ}C$). The drug loss was apparently dependent on temperature and the system composition. Increasing temperature induced the acceleration of the drug loss of $7{\sim}10%$ at $4^{\circ}C$ and $14{\sim}16 %$ at $40^{\circ}C$. This may be owing to the high diffusivity resulting from the swelling of the hydrophilic surface of the nanoparticle at high temperature. However, the addition of PEG 400 to the system led to the reduction of the drug loss. This result is associated with the previous investigation that PEG coverage decreased diffusion coefficient because of the formation of the denser structure on the surface of nanoparticulate. Nevertheless, the limited amount of PEG, less than 2% (w/v), should be used to prevent the precipitation and discoloration of the system.

• 대한수의학회지
• /
• 제54권1호
• /
• pp.39-48
• /
• 2014

The prevalence of thermophilic Campylobacter (C.) spp. in stray, breeding, and household dogs was 25.2, 12.0, and 8.8%, respectively. C. jejuni and C. upsaliensis were the predominant Campylobacter spp. from household dogs. cdtA, cdtB, and cdtC were detected by PCR in all isolates. Despite the high cytolethal distending toxin (CDT) gene prevalence, only 26 (31%) C. jejuni strains and one (15.3%) C. coli strain showed evidence of CDT production in HEp-2 cell cytotoxicity assays. Virulence-associated genes detected in the C. jejuni and C. coli isolates were cadF, dnaJ, flaA, racR, ciaB, iamA, pldA, virB11, ceuE, and docC. cadF, dnaJ, flaA, and ceuE were found in all C. jejuni and C. coli isolates. When detecting Guillain-Barr$\acute{e}$ syndrome-associated genes (galE, cgtB, and wlaN), galE was identified in all isolates. However, cgtB and wlaN were more prevalent in C. jejuni isolates from humans than those from dogs. Adherence and invasion abilities of the C. jejuni and C. coli strains were tested in INT-407 cells. A considerable correlation (adjusted $R^2$= 0.678) existed between adherence and invasion activities of the Campylobacter spp. isolates.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 proceedings of the second asia international conference on tribology
• /
• pp.407-408
• /
• 2002

This paper presents a split cooling system for a new inline 4-cylinder automotive engine. The split cooling system circulates coolant to the cylinder head and cylinder block separately. The coolant flow in the cylinder block is controlled by a $2^{nd}$ Thermostat installed at the outlet of cylinder block. The $2^{nd}$ thermostat closes when the coolant temperature is low. And this makes the coolant flow in cylinder block nearly stagnant, thereby reducing the coolant-side heat transfer coefficient and raising cylinder bore temperature. The $2^{nd}$ thermostat starts to open when the coolant temperature reaches a specified temperature. The test results on engine dynamometer show improved fuel economy and lower exhaust emission which result from the decrease in friction works and cooling loss. Also, several vehicle tests, with application of the new engine have been performed. Fuel economy improvement of 0.5{\sim}2.0%$ yields from different test modes and details are discussed in this paper.

• 한국의류산업학회지
• /
• 제5권4호
• /
• pp.399-407
• /
• 2003

The natural dyeing of silk fabric with Purple-Fleshed Sweet Potato (PSP) was investigated. The colorant was extracted with distilled water, and the color difference (${\Delta}E^*$) was increased with increasing the amount of PSP in extraction. The proper temperature and time for the extracting of colorant with PSP were $60^{\circ}C$ and 60 minutes. The optimum temperature, time and pH for the dyeing of silk with extracted PSP were $60^{\circ}C$, 60 minutes and pH 4 respectively. In various mordanted methods, the color difference values of post-mordanted silk fabric were higher than those of pre- and simultaneous-mordanted method. And the wide range of colors( GY, Y, YR, R, RP) were obtained according to various mordants, mordanting methods and mordant concentrations. Light colorfastness of the mordanted silk fabric was improved. Laundering colorfastness, dry cleaning colorfastness and perspiration colorfastness were shown to be good.

• 공업화학
• /
• 제24권4호
• /
• pp.407-411
• /
• 2013

부산시 남부하수처리장 혐기성 하수처리 공정 중 채취한 슬러지에서 수소생산 균주 AS12를 분리하였다. 분리된 균주의 16S rRNA 염기서열을 바탕으로 계통학적 분류 결과 Escherichia coli sp.에 속하는 것으로 동정되었다. 수소생산을 위한 최적 온도와 pH는 각각 $35^{\circ}C$와 8.0이었다. 배지내의 탄소원과 질소원의 종류 및 농도가 수소생산에 미치는 영향을 알아보았다. 탄소원은 galactose로 10 g/L가 최적이었고, 질소원은 peptone으로 5 g/L가 최적이었다.

• Journal of Pharmaceutical Investigation
• /
• 제33권1호
• /
• pp.21-28
• /
• 2003

Ketorolac tromethamine(KT) is a nonsteroidal agent with potent analgesic and moderate anti-inflammatory activity. The lipid-water partition coefficient of KT was evaluated and KT gel was formulated as a gel containing different pH, different concentrations of polymer (poloxamer 407, carbopol 941), propylene glycol, ethanol and various enhancers. The resulting KT gels were evaluated with respect to their viscosity, in vitro drug permeation rate through hairless mouse skin and stability. In n-octanol and chloroform, the lipid-water partition coefficient of KT was the highest at pH 4 phosphate buffer. The apparent viscosity of KT gel increased with an increase in gel pH, polymer and enhancer concentration. But the apparent viscosity of KT gel decreased with an increase in ethanol concentration. The permeation rate of KT through hairless mouse skin from gels different pH was maximum at pH 4 which is close to KT $pK_{a}$ 3.54. The permeation rate decreased with an increase in polymer, propylene glycol concentration. But the permeation rate increased with an increase in ethanol. The increase of drug concentration from 1 to 3% induced linear increase in permeation rate. The best enhancer was the combination of $Labrasol^{\circledR},\;Transcutol^{\circledR}$, oleic acid and l-menthol. In the accelerated stability test(25, 40 and $50{\circ}C$), pH 5 gel was most stable and pH 4 gel was most unstable for 90 days.

• 설비공학논문집
• /
• 제11권4호
• /
• pp.499-510
• /
• 1999

A computer program was developed for simulating performance(capacity, power consumption and etc.) of air-conditioners using compressor, fin-tube heat exchanger and capillary tube. The program consists of five modules, condenser, evaporator, compressor, capillary tube simulation modules and properties modules of refrigerant and moist air, The present program is focused on R22 only, however can be easily extended for other refrigerants such as R407C and R410A just by adding property modules. The compressor simulation module utilizes performance maps supplied by manufacturers-map-based model. The condenser and evaporator simulation modules are modeled using tube-by-tube method. Simulation results(capacity and power consumption) were compared with calorimeter test results of actual air-conditioners of window and split types, where more than 82% of the data lied within ${\pm}5$% of the predicted results.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.407-408
• /
• 2005

High surface area electrodes for aluminum electrolytic capacitors are produced by AC electrochemical processes. Optimization of crystallographic etch pit growth on aluminium during AC etching of cathode film for aluminium as electrolytic capacitor has been established. In this work, we present the observations of pit distributions by galvanostatic measurements. The effects of electrolyte concentration, current density, frequency, various pre-treatments and etching time have been studied. The specimen was pretreated in 0.5M NaOH and 1M HCl at $40\sim60^{\circ}C$, and transferred into a cell containing 1M HCl, then various mol $H_2SO_4$ etchant was added. Pit size distributions were determined with scanning electron microscopy (SEM).

• 한국세라믹학회지
• /
• 제43권7호
• /
• pp.402-407
• /
• 2006

NiO/YSZ(70 wt%NiO) composite powders were prepared by ball-milling of 8YSZ and NiO precursors, dried and then followed by calcination. The approach was to combine acidic $Ni(NO_3)_2{\cdot}6H_2O$ and basic $2NiCO_3{\cdot}3Ni(OH)_2{\cdot}4H_2O$ via acid-base reaction as a mixed NiO precursor. Their effects were studied in the aspects of DSC, microstructure, porosity, and electrical conductivity. Ni/YSZ composite of 1N9C (1 mole NiO from the nitrate and 9 moles of NiO from the carbonate) was prepared by consolidation at $1400^{\circ}C$ for 3 h, and then followed by reduction at $1000^{\circ}C$ for 3 h under flowing of 6% $H_2/N_2$. It showed a homogeneous microstructure with ${\sim}20%$ porosity and 1880 S/cm at $1000^{\circ}C$.