• Biomedical Science Letters
• /
• v.16 no.3
• /
• pp.193-196
• /
• 2010

Multiplex PCR-based short tandem repeat (STR) analysis is considered as a good tool for monitoring bone marrow engraftment after sex-mismatched allogeneic transplantation and provides a sensitive and accurate assessment of the contribution of both donor and/or recipient cells in post-transplantation specimens. Forensic STR analysis and quantitative real time PCR are used to determine the proportion of donor versus recipient each contained within the total DNA. The STR markers were co-amplified in a single reaction by using commercial $PowerPlex^{(R)}$ 16 system and $AmpFISTR^{(R)}$ $Identifiler^{(R)}$ / $Yfiler^{(R)}$ PCR amplification kits. Separation of the PCR products and fluorescence detection were performed by ABI $PRIS^{(R)}$ 3100 Genetic Analyzer with capillary electrophoresis. The $GeneMapper^{TM}$ ID software were used for size calling and analysis of STR profiles. Extracted DNA was quantified by the $Quantifiler^{TM}$ Human DNA / Y Human Male DNA Quantification Kit The intent of this study was to analyze the ratio of donor versus recipient cells in the post-transplant peripheral blood, spleen, lung and kidney specimens. Specimens were taken from the traffic accident male victim who had been engrafted from bone marrow female donor. Blood and spleen specimens displayed female donor DNA profile. Kidney specimen showed male recipient DNA profile. Interestingly, lung tissue showed mixed profiles. The findings of this study indicate that the forensic STR analysis using fluorescence labeling PCR combined with capillary electrophoresis is quick and reliable enough to assess the ratio of donor versus recipient cells and to monitor the mixed chimeric patterns.

• Korean Journal of Microbiology
• /
• v.28 no.3
• /
• pp.219-228
• /
• 1990

A kanamycin resistance($Km^r$) gene was studied for its transfer in natural freshwater environments by using the natural bacterial isolate(M1) of DK1 and the DKC601 strain, $Km^r$ plasmid of which was genetically engineered from the NI strain. The transfer frequency ofthe $Km^r$ gene and rearrangement of the $Km^r$ plasmid were compared between the gnetically engineered microorganism(GEM) and the NI parental strain by conjugation with the same recipient strain. The transfer frequency of the $Km^r$ gene was about $9.1\times 10^{-12}-1.8\times 10^{-11}$ in both the GEM and NI strains at 5 to $10^{\circ}C$, but the frequency of the NI was about 10 times higher than that of the GEM at 20 to $30^{\circ}C$. The $Km^r$ plasmid in the transconjugants obtained by conjugation of the NI with the MY1 strain as a ricipient showed alot of rearrangement, but the $Km^r$ plasmid transferred from the GEM was stable without alteration of its size. When the MT2 strain was used as a recipient, however, such a rearrangement of the $Km^r$ plamid was observed in the transconjugants obtained from the GEM as well as the NI strain. In those transconjugants obtained from different mating pairs and water environments, the plasmid were appeared to decrease in their number as the period of conjugation time was prolonged, but only the $Km^r$ plasmid transferred from the GEM kept having its size of 52kb. Therefore, the $Km^r$ gene was transferred at the same rate from the GEM and NI strains in natural freshwater environment, but the gene of the GEM strain was more stable than the NIduring conjugation and the $Km^r$ plasmid was rearranged by changing the recipient strain for conjugation in any water environments.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.3
• /
• pp.29-38
• /
• 2015

In this paper, scale efficiencies and relative efficiencies of R&D projects in Industrial Technology Program, sponsored by Ministry of Trade, Industry and Energy, Korea, are calculated and compared. For the process, various DEA (Data Envelopment Analysis) models are adopted as major techniques. For DEA, two stage input oriented models are utilized for calculating the efficiencies. Next, the calculated efficiencies are grouped according to their subprograms (Industrial Material, IT Fusion, Nano Fusion, Energy Resources, and Resources Technology) and recipient types (Public Enterprise, Large Enterprise, Medium Enterprise, Small Enterprise, Lab., Univ., and etc.) respectively. Then various subprograms and recipient types are compared in terms of scale efficiencies (CCR models) and relative efficiencies (BCC models). In addition, the correlation between the 1st stage relative efficiencies and the 2nd stage relative efficiencies is calculated, from which the causal relationship between them can be inferred. Statistical analysis shows that the amount of input, in general, should increase in order to be scale efficient (CCR models) regardless of the subprograms and recipient types, that the 1st and 2nd stage relative efficiencies are different in terms of the programs and recipient types (BCC models), and that there is no significant correlation between the 1st stage relative efficiencies and the 2nd stage relative efficiencies. However, the results should be used only as reference because the goal each and every subprogram has is different and the situation each and every recipient type faces is different. In addition, the causal link between the 1st stage relative efficiencies and the 2nd relative efficiencies is not considered, which, in turn, is the limitation of this paper.

• Knowledge Management Research
• /
• v.12 no.2
• /
• pp.1-16
• /
• 2011

This study examined the influence of the antecedents of knowledge transfer from both the knowledge source's and recipient's perspectives using a social network survey. Prior research usually focused on either perspective of the knowledge source or recipient, thus could not include both. Analyzing the responses from 335 R&D employees of the five firms, the study showed that all antecedents of knowledge transfer - reward, reciprocity, subjective norm, and perceived behavioral control - are influential on knowledge transfer from the knowledge source's perspective. However, from the knowledge recipient's perspective, perceived behavioral control was influential on the quality of knowledge transfer and subjective norm was on the number of knowledge recipients. Expected reward and reciprocity did not show significant influence. This study proved that the necessity of considering both the knowledge source's and the recipient's perspectives when measuring knowledge transfer and the importance of intrinsic motivations, such as subjective norm and perceived behavioral control.

• Korean Journal of Microbiology
• /
• v.30 no.2
• /
• pp.88-95
• /
• 1992

The genetically engineered microorganisms (GEMS) could be released accidentally or ii)rexperimental purposes, as the genetic engineering, technique ha:. become very popular inany laboratories of biological sciences. But there have been littlt: informations on transkrbehavior of the genetically ~nodified genes in the natural en\ironmentx. In this stutly.antibiotic resistant bacteria were isolated from nat.ural waters. and then GEM strains wereconstructed i'rom the natural isolate (NI) by ~noclification oi' the Km' plasmitl. Thetransferability of the plasmids in the GEM and NI strains were examinetl by con-jugationin Luria-Bertani broth :it 30$^{\circ}$C. Also the cff'ccts 01' mating strain and pH on their transferfrequency and rearrangement of the plasmids in tl-~ec o~ijugantsM ere comp:irati\ely stuclictl.I'hc transkr frequency of Km' plasmid in donor of GEM and N1 strains wah similar a.;about 10 ' when co~ljugation was conducted wit11 M'I'I strain is recipient at pH 7. butthat of 1)KCOOI was lowered to 1.2X 10 '. And when the lab. stlain was uhccl as recipient.the transfer tendency of the plasmid was about same in both (;EM and NI strains usedas donor. All thc tionor 5trains. except for I)KC601. showecl the Ilighcs~ frequency of about10 ' at pH 7 and the frequcncics were lowered at both pH 5 and 9. Hut the mocliliedKm' plasmid in the cloned strain of DKC601 was transferred hy very low frequency of10 "at pH 5 ant1 7 comparing to other GEM strains. especiall! any co~~.jugantws ere notobtained at pH 4 and 9 even after conjugation for 6 hours. Rearrangement of the plasmidstranskrred into the lab. strain was not found in the conjugants. I\ulcornerut a lot of rearrangclncntwas ohservecl nlhen they were transferred into the NI strain. Such a rearrangement wasmore severe when donor was GEM strain rather then NI strain Hut such ;r phenomenonwas less affected by p!-l values.r phenomenon was less affected by p!-l values.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.2
• /
• pp.194-199
• /
• 2007

Effects of recombinant bovine somatotropin (bST) on plasma hormonal concentration, embryo quality, and pregnancy rate were examined during the superovulation and synchronization treatment in donor and recipient cows. Hanwoos (Korean native beef cattle) were treated with controlled internal drug release (CIDR) combined with bST (CIDR+bST) or without bST (CIDR) as donor cows. The embryos recovered from donors were transferred into Holstein recipient heifers treated with bST (CIDR+bST) or without bST (CIDR) for synchronization. The correlation between IGF-I and P4 showed a positive pattern in the CIDR+bST group (r=0.44, p<0.01), but a negative pattern was shown in the CIDR group (r = -0.59, p<0.02) at day 7 of estrous cycles. Although the number of recovered, transferable, and degenerated embryos was not different, quantities of grade 1 (excellent) embryos in CIDR+bST group were significantly higher than those of the CIDR group (p<0.01). The pregnancy rate was higher in the CIDR+bST recipient group compared to CIDR group (p<0.05), when the embryos were recovered from the donors treated with CIDR. However, the pregnancy was maintained highly in both recipient groups, when the embryos were produced by CIDR+bST treated donors. It can be concluded that bST administration combined with CIDR is an effective method for superovulation and synchronization treatment to stabilize plasma hormonal levels, to obtain excellent quality of embryos, and to get higher pregnancy rate.

• Journal of Embryo Transfer
• /
• v.1 no.1
• /
• pp.35-49
• /
• 1986

Recipients are an integral part of embryo transfer and they are expensive to maintain as a good recipient. Recipient management is one of the most important components in a successful embryo transfer program. Management includes selection and subsequent care of the animals. A good recipient is basically on "open" cows or heffers whose reproductive tract is capable of receiving one or two embryos and incubating it to term. Potential recipients should be always be healthy and cycling normally ranging from 18 to 23 days. A thorough veterinary examination is recommended for candidate of recipients and cattle for questionable health should be eliminated from the recipient herd. Age and size of recipients are particularly important considerations when heifers are used, because of most embryos available for transfer are from large dams and sires. Body condition can influence a recipient's production, reproduction and health. Obese and underconditioned cattle should be avoided for use. Transfer of fresh embryos especially requires precise synchronization of donors and recipients. For estrus synchronization, PGF$_2$$\alpha$ is injected twice 10 to 12 days apart and short4erm progestagen treatment is applied to potential recipient cattle by coil into vagina (PRID) or ear implant (Synchro-Mate-B). The highest pregnancy results are achieved in recipients at exact synchrony with donors or 12 to 24 hr earlier than donors. Estrus detection is a major factor in breeding efficiency. High accuracy can be achieved by use of heat mount detection alds or by obserbing cattle for 30-minute peroids 3 times daily. Assay progesterone in milk can be used to discrIminate between pregnant and nonprenant recipients. Rectal palpation on day 35 to 70 after is an accurate and safe method of pregnancy diagnosis. Embryonic mortality in recipients may be associated with factors such as high environmental temperature and nutritional or lactational stress in early lactation period. Achievement of short calving interval requires concentrated management activity during the first 90 days following calving. Acceptable candidate for a recipient should be routinely vaccinated for infectious diseases. Proper nutritional programs according to NRC requirements and body condition scoring system for recipient cattles are vital to the ultimate success of an embryo transfer program.r program.

• Microbiology and Biotechnology Letters
• /
• v.17 no.5
• /
• pp.454-460
• /
• 1989

Antibiotics resistance genes both in natural bacterial isolates and the genetically cloned bacteria were comparatively studied for their transfer frequencies by the method of conjugation in several different water environments. The Kmr genes in both kinds of bacteria were transferred more frequently in autoclaved wastewater of laboratory environment than in natural river water, but in Luria Bertani (LB) broth medium under the laboratory conditions the transfer frequences of the genes were much higher than in the autoclaved wastewater. The transfer frequencies at 2$0^{\circ}C$ and 3$0^{\circ}C$ were not much different in any water environments. The Km$^{${\gamma}$}$ genes of the genetically cloned bacteria and the natural isolates were transferred at the same frequency both in natural river water and in the autoclaved wastewater of laboratory environment, but in LB broth under laboratory conditions the transfer frequencies were lowered by 10$^{-3}$ to 10$^{-4}$ in the genetically cloned cells than the natural isolates. When donors of different cloned cells were conjugated with recipient of a natural isolates, the Km$^{${\gamma}$}$ genes of different donor cells were transferred at the about same frequency, but the same donor of the cloned cell were conjugated with recipients of different natural isolates, the transfer of Km$^{${\gamma}$}$ gene of the cloned cell showed some differences of 101 to 102 in frequency.

• Korean Journal Plant Pathology
• /
• v.10 no.1
• /
• pp.39-46
• /
• 1994

Pseudomonas fluorescens Biovar III strains S-2 antagonistic to Rhizoctonia solani was subjected to Tn5 mutagenesis by the transposon vector pGS9. Ampicillin and kanamycin resistant (Ampr, Kmr) transconjugants were recovered at a frequency of 1.3$\times$10-7 per initial recipient cell, when recipient cells were washed twice in TE buffer before conjugation. Of the ca. 3000 transconjugants, a frequency of noninhibitory (Inh-), nonfluorescent (Flu-) and auxotorphic (Pro-) mutants were 0.27%, 0.47% and 0.40%, respectively. In these mutants, all Inh- mutants showed the same colony morphology as wild type, whereas all Flu- and Pro- mutants inhibited the growth of R. solani. These mutants were also susceptible to chloramphenicol, indicating only the Tn5 element, except for parts of pGS9, was integrated into the recipient genome. In a Southern blot analysis, the Tn5 element inserted into one site on the chromosome for each of the chosen mutants. However, Tn5 insertion sites of Inh-, and Pro- mutants were differed in each other. These indicate that the genes essential for R. solani inhibition, fluorescent production and auxotrophic are chromosomally located, but not linked to each other.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.34 no.2
• /
• pp.180-186
• /
• 2008

Purpose: This study was performed to evaluate the effect of the implant recipient site preparation methods on primary stability of implants with the instruments of $Osstell^{TM}$ and $Periotest^{(R)}$ in the iliac bone of cadaver. Methods and materials: The 8 iliac bones in 4 cadavers and implants treated with resorbable blasting media (RBM) were used. $Periotest^{(R)}$ (Simens AG, Germany) and $Osstell^{TM}$ (Model 6 Resonance Frequency Analyser: Integration Diagnostics Ltd., Sweden) were used to measure primary stability of implants. Implants were inserted into the iliac crest of the cadaver. In control group, the recipient site was prepared according to the manufacturer's recommendation: 1.8 mm guide drill, 2.0 mm initial drill, 2.7 mm pilot drill, 2.7 mm twist drill, 3.0 mm twist drill, 3.3 mm pilot drill, 3.3 mm twist drill, and 3.3 mm countersink drill as well as tapping drill were used in order. In the group 1, implant recipient sites were prepared by sequentially drilling from 1.8 mm guide drill to 3.0 mm twist drill and then inserted implants without countersinking and tapping. In the group 2, implant recipient sites were prepared to 3.0 mm twist drill and countersink drill and then inserted implants without tapping. In the group 3, the sites were prepared to 3.0 mm twist drill and countersink drill as well as tapping drill. In the group 4, the sites were prepared to 3.3 mm twist drill. In the group 5, the sites were prepared to 3.3 mm twist drill and countersink drill. A total of 60 implants were placed (n=10). The stability was measured using $Osstell^{TM}$ and $Periotest^{(R)}$ mesiodistally and buccolingually. To compare the mean stability of each group statistically, One-way ANOVA was used and correlation of instrument were analyzed using SPSS 12.0. The results obtained were as follows; 1. The stability of group 1 measured using $Osstell^{TM}$ and $Periotest^{(R)}$ buccolingually showed the highest, and there are significant difference statistically between control group and experimental group 1,2,4 in each instruments respectively (p<0.05). 2. The stability of group 1 measured using $Osstell^{TM}$ and $Periotest^{(R)}$ mesiodistally showed the highest. There are significant difference statistically between control group and all experimental groups in $Osstell^{TM}$, and between control group and experimental group 1,2,3,4 (p<0.05). 3. There are high correlation between the measurements of $Osstell^{TM}$ and $Periotest^{(R)}$ (p<0.05). Conclusion: These results indicate that the primary stability of implant can be obtained by the recipient sites preparation with smaller diameter drill than that of implant or minimal drilling.