• Journal of the Korean Geotechnical Society
• /
• v.22 no.8
• /
• pp.107-118
• /
• 2006

Among a variety of influencing components, time-variant seepage and long-term underground motion are important to understand the abnormal behavior of tunnels. Excessiveness of these two components could be the direct cause of severe damage on tunnels, however, it is not easy to quantify the effect of these on the behavior of tunnels. These parameters can be estimated by using inverse methods once the appropriate relationship between inputs and results is clarified. Various inverse methods or parameter estimation techniques such as artificial neural network and least square method can be used depending on the characteristics of given problems. Numerical analyses, experiments, or monitoring results are frequently used to prepare a set of inputs and results to establish the back analysis models. In this study, a back analysis method has been developed to estimate geotechnically hard-to-known parameters such as permeability of tunnel filter, underground water table, long-term rock mass load, size of damaged zone associated with seepage and long-term underground motion. The artificial neural network technique is adopted and the numerical models developed in the first part are used to prepare a set of data for learning process. Tunnel behavior, especially the displacements of the lining, has been exclusively investigated for the back analysis.

• Journal of Nutrition and Health
• /
• v.56 no.3
• /
• pp.231-246
• /
• 2023

Purpose: The aim of this study was to investigate the anti-osteoarthritic effect of the ethanol extract of Boswellia serrata gum resin (FJH-UBS) enriched with keto-β-boswellic acid and 3-O-acetyl-11-keto-β-boswellic acid compared to the conventional Boswellia serrata extract by adding the process of removing oil with hexane, in the monosodium iodoacetate (MIA)-induced osteoarthritis rat model. Methods: Sprague-Dawley (SD) rats were orally administered 0, 40, or 80 mg of FJH-UBS/kg body weight (BW)/day for 5 weeks and injected with MIA intra-articularly into right knee joints on day 15 to induce osteoarthritis. Changes in the knee joint microarchitecture, cartilage degradation, the expression of inflammatory mediators, cytokines, and matrix metalloproteinases (MMPs) in serum and synovia were observed. Results: Oral administration of FJH-UBS (80 mg/kg BW/day) reduced MIA-induced knee swelling and cartilage degradation and increased the expression of type II collagen and aggrecan in articular cartilage. Furthermore, FJH-UBS administration reduced MIA-induced increases in the serum levels of prostaglandin E2, leukotriene B4, interleukin (IL)-1β, IL-6, and MMP-13, and MIA-induced increases in the mRNA expressions of inducible nitric oxide synthase, cyclooxygenase-2, 5-lipoxygenase, IL-1β, IL-6, TNF-α, MMP-2, MMP-9, and MMP-13 in the synovia of knee joints. Conclusion: These results indicate that FJH-UBS exerts its anti-osteoarthritic effects by suppressing the expressions of inflammatory cytokines and MMPs and, thus, cartilage degradation. Furthermore, they suggest that FJH-UBS has potential use as a functional food that improves joint and cartilage health.

• Composites Research
• /
• v.37 no.1
• /
• pp.7-14
• /
• 2024

Due to the structural characteristic of a double roller, the double roller can have various deformation behaviors depending on a gap block design, even if dimensions and loading conditions for the double roller are the same. Based on this feature, we propose a strategy for designing the gap block of the carbon-fiber reinforced plastic (CFRP) double roller to minimize defects (e.g., sagging and wrinkling), which can be raised during the product conveying process, with the pursue of the lightweight design. In the suggested strategy, analysis cases are first selected by considering main design parameters and engineering tolerances of the gap block, and then deformation behaviors of these selected cases are extracted using the finite element method (FEM). Here, to obtain the optimal gap block parameters that satisfy the purpose of this study, deformation deviations in the contact area are calculated and compared using the extracted deformation behaviors. Note that the contact area in this work is located between the product and the roller. As a result, through the design method of the gap block proposed in this work, it is possible to construct the CFRP double roller that can significantly decrease the defects without changing the overall sizes of the roller. A detailed method is suggested herein, and the results are evaluated in a numerical way.

• Journal of Navigation and Port Research
• /
• v.47 no.6
• /
• pp.394-400
• /
• 2023

Unlike advancements on land, the maritime industry has been slow to embrace new technologies, primarily due to user apprehension toward unproven innovations in the development process. The existing paradigm of technology development, marked by expert-oriented and laboratory-centric test environments, often leads to a stagnation of progress at the research stage, as the applicability of the technology remains uncertain. This study departed from the conventional research system and introduced a novel methodology known as a "living lab." This approach aimed to ensure applicability by actively involving field-oriented users throughout the entire lifecycle of technology development, encompassing planning, development, verification, and evaluation. The presentation of a plan for the construction and operation of such a living lab in this study is expected to contribute to establishing an efficient experimentation system for ships that can reflect user opinions in the future and to secure technology applicability in the maritime field.

• Journal of Intelligence and Information Systems
• /
• v.24 no.3
• /
• pp.177-198
• /
• 2018

Recently, as economic property it has become necessary to acquire and utilize the framework for water resource measurement and performance management as the property of water resources changes to hold "public property". To date, the evaluation of water technology has been carried out by feasibility study analysis or technology assessment based on net present value (NPV) or benefit-to-cost (B/C) effect, however it is not yet systemized in terms of valuation models to objectively assess an economic value of technology-based business to receive diffusion and feedback of research outcomes. Therefore, K-water (known as a government-supported public company in Korea) company feels the necessity to establish a technology valuation framework suitable for technical characteristics of water resources fields in charge and verify an exemplified case applied to the technology. The K-water evaluation technology applied to this study, as a public interest goods, can be used as a tool to measure the value and achievement contributed to society and to manage them. Therefore, by calculating the value in which the subject technology contributed to the entire society as a public resource, we make use of it as a basis information for the advertising medium of performance on the influence effect of the benefits or the necessity of cost input, and then secure the legitimacy for large-scale R&D cost input in terms of the characteristics of public technology. Hence, K-water company, one of the public corporation in Korea which deals with public goods of 'water resources', will be able to establish a commercialization strategy for business operation and prepare for a basis for the performance calculation of input R&D cost. In this study, K-water has developed a web-based technology valuation model for public interest type water resources based on the technology evaluation system that is suitable for the characteristics of a technology in water resources fields. In particular, by utilizing the evaluation methodology of the Institute of Advanced Industrial Science and Technology (AIST) in Japan to match the expense items to the expense accounts based on the related benefit items, we proposed the so-called 'K-water's proprietary model' which involves the 'cost-benefit' approach and the FCF (Free Cash Flow), and ultimately led to build a pipeline on the K-water research performance management system and then verify the practical case of a technology related to "desalination". We analyze the embedded design logic and evaluation process of web-based valuation system that reflects characteristics of water resources technology, reference information and database(D/B)-associated logic for each model to calculate public interest-based and profit-based technology values in technology integrated management system. We review the hybrid evaluation module that reflects the quantitative index of the qualitative evaluation indices reflecting the unique characteristics of water resources and the visualized user-interface (UI) of the actual web-based evaluation, which both are appended for calculating the business value based on financial data to the existing web-based technology valuation systems in other fields. K-water's technology valuation model is evaluated by distinguishing between public-interest type and profitable-type water technology. First, evaluation modules in profit-type technology valuation model are designed based on 'profitability of technology'. For example, the technology inventory K-water holds has a number of profit-oriented technologies such as water treatment membranes. On the other hand, the public interest-type technology valuation is designed to evaluate the public-interest oriented technology such as the dam, which reflects the characteristics of public benefits and costs. In order to examine the appropriateness of the cost-benefit based public utility valuation model (i.e. K-water specific technology valuation model) presented in this study, we applied to practical cases from calculation of benefit-to-cost analysis on water resource technology with 20 years of lifetime. In future we will additionally conduct verifying the K-water public utility-based valuation model by each business model which reflects various business environmental characteristics.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.5 no.1
• /
• pp.51-61
• /
• 2002

Purpose: The most common causes of neonatal cholestasis are neonatal hepatitis (NH) and extrahepatic biliary atresia (EHBA). Since neonatal cholestasis presents with variable expression of same pathologic process and has similar clinical, biochemical, and histologic features between EHBA and idiopathic neonatal hepatitis (NH), differential diagnosis is often difficult. We reviewed the differences of clinical characteristics and laboratory data to find out any correlation between the results of $Tc^{99m}$ DISIDA scan and presence of acholic stool. Methods: Between June 1993 and January 2001, total 29 infants younger than 4 month-old underwent $Tc^{99m}$ DISIDA scan. Their biochemical tests and clinical course were reviewed retrospectively. Results: Patients who had negative intestinal activity on $Tc^{99m}$ DISIDA scan showed acholic stool and revealed higher serum direct bilirubin and urine bilirubin level. 18.2% of patients with acholic stool showed intestinal activity on $Tc^{99m}$ DISIDA scan and 81.8% of them did not. All the patients without acholic stool showed positive intestinal activity on $Tc^{99m}$ DISIDA scan. The result of $Tc^{99m}$ DISIDA scan and the presence of acholic stool showed high negative correlation (r :-0.858). Patients with acholic stool and negative intestinal activity on $Tc^{99m}$ DISIDA scan showed higher serum total bilirubin level. Patients without acholic stool and positive intestinal activity on $Tc^{99m}$ DISIDA scan showed higher serum level of ALT. Conclusion: Patients with acholic stool and negative intestinal activity showed high correlation, but 18.2% of patients with acholic stool showed positive intestinal activity. So operative cholangiogram or transcutaneous liver biopsy should be performed for confirmation.

• Proceedings of the Korean Reliability Society Conference
• /
• 2001.06a
• /
• pp.277-278
• /
• 2001

The successful operation of a product In service depends upon the effective provision of logistic support in order to achieve and maintain the required levels of performance and customer satisfaction. Logistic support encompasses the activities and facilities required to maintain a product (hardware and software) in service. Logistic support covers maintenance, manpower and personnel, training, spares, technical documentation and packaging handling, storage and transportation and support facilities.The cost of logistic support is often a major contributor to the Life Cycle Cost (LCC) of a product and increasingly customers are making purchase decisions based on lifecycle cost rather than initial purchase price alone. Logistic support considerations can therefore have a major impact on product sales by ensuring that the product can be easily maintained at a reasonable cost and that all the necessary facilities have been provided to fully support the product in the field so that it meets the required availability. Quantification of support costs allows the manufacturer to estimate the support cost elements and evaluate possible warranty costs. This reduces risk and allows support costs to be set at competitive rates.Integrated Logistic Support (ILS) is a management method by which all the logistic support services required by a customer can be brought together in a structured way and In harmony with a product. In essence the application of ILS:- causes logistic support considerations to be integrated into product design;- develops logistic support arrangements that are consistently related to the design and to each other;- provides the necessary logistic support at the beginning and during customer use at optimum cost.The method by which ILS achieves much of the above is through the application of Logistic Support Analysis (LSA). This is a series of support analysis tasks that are performed throughout the design process in order to ensure that the product can be supported efficiently In accordance with the requirements of the customer.The successful application of ILS will result in a number of customer and supplier benefits. These should include some or all of the following:- greater product uptime;- fewer product modifications due to supportability deficiencies and hence less supplier rework;- better adherence to production schedules in process plants through reduced maintenance, better support;- lower supplier product costs;- Bower customer support costs;- better visibility of support costs;- reduced product LCC;- a better and more saleable product;- Improved safety;- increased overall customer satisfaction;- increased product purchases;- potential for purchase or upgrade of the product sooner through customer savings on support of current product.ILS should be an integral part of the total management process with an on-going improvement activity using monitoring of achieved performance to tailor existing support and influence future design activities. For many years, ILS was predominantly applied to military procurement, primarily using standards generated by the US Government Department of Defense (DoD). The military standards refer to specialized government infrastructures and are too complex for commercial application. The methods and benefits of ILS, however, have potential for much wider application in commercial and civilian use. The concept of ILS is simple and depends on a structured procedure that assures that logistic aspects are fully considered throughout the design and development phases of a product, in close cooperation with the designers. The ability to effectively support the product is given equal weight to performance and is fully considered in relation to its cost.The application of ILS provides improvements in availability, maintenance support and longterm 3ogistic cost savings. Logistic costs are significant through the life of a system and can often amount to many times the initial purchase cost of the system.This study provides guidance on the minimum activities necessary to Implement effective ILS for a wide range of commercial suppliers. The guide supplements IEC60106-4, Guide on maintainability of equipment Part 4: Section Eight maintenance and maintenance support planning, which emphasizes the maintenance aspects of the support requirements and refers to other existing standards where appropriate. The use of Reliability and Maintainability studies is also mentioned in this study, as R&M is an important interface area to ILS.

• Asia pacific journal of information systems
• /
• v.19 no.2
• /
• pp.43-72
• /
• 2009

Recently, user-created content (UCC) have emerged as popular medium of on-line participation among users. The Internet environment has been constantly evolving, attracting active participation and information sharing among common users. This tendency is a significant deviation from the earlier Internet use as an one-way information channel through which users passively received information or contents from contents providers. Thanks to UCCs online users can now more freely generate and exchange contents; therefore, identifying the critical factors that affect content-generating activities has increasingly become an important issue. This paper proposes a set of critical factors for stimulating contents generation and sharing activities by Internet users. These factors were derived from the theories of folklores such as tales and songs. Based on some shared traits of folklores and UCC content, we found four critical elements which should be heeded in constructing UCC contents, which are: context of culture, context of situation, skill of generator, and response of audience. In addition, we selected three major UCC websites: a specialized contents portal, a general internet portal, and an official contents service site, They have different use environments, user interfaces, and service policies, To identify critical factors for generating, sharing and transferring UCC, we traced user activities, interactions and flows of content in the three UCC websites. Moreover, we conducted extensive interviews with users and operators as well as policy makers in each site. Based on qualitative and quantitative analyses of the data, this research identifies nine critical factors that facilitate contents generation and sharing activities among users. In the context of culture, we suggest voluntary community norms, proactive use of copyrights, strong user relationships, and a fair monetary reward system as critical elements in facilitating the process of contents generation and sharing activities. Norms which were established by users themselves regulate user behavior and influence content format. Strong relationships of users stimulate content generation activities by enhancing collaborative content generation. Particularly, users generate contents through collaboration with others, based on their enhanced relationship and specialized skills. They send and receive contents by leaving messages on website or blogs, using instant messenger or SMS. It is an interesting and important phenomenon, because the quality of contents can be constantly improved and revised, depending on the specialized abilities of those engaged in a particular content. In this process, the reward system is an essential driving factor. Yet, monetary reward should be considered only after some fair criterion is established. In terms of the context of the situation, the quality of contents uploading system was proposed to have strong influence on the content generating activities. Among other influential factors on contents generation activities are generators' specialized skills and involvement of the users were proposed. In addition, the audience response, especially effective development of shared interests as well as feedback, was suggested to have significant influence on contents generation activities. Content generators usually reflect the shared interest of others. Shared interest is a distinct characteristic of UCC and observed in all the three websites, in which common interest is formed by the "threads" embedded with content. Through such threads of information and contents users discuss and share ideas while continuously extending and updating shared contents in the process. Evidently, UCC is a new paradigm representing the next generation of the Internet. In order to fully utilize this innovative paradigm, we need to understand how users take advantage of this medium in generating contents, and what affects their content generation activities. Based on these findings, UCC service providers should design their websites as common playground where users freely interact and share their common interests. As such this paper makes an important first step to gaining better understand about this new communication paradigm created by UCC.

• Journal of Global Scholars of Marketing Science
• /
• v.17 no.3
• /
• pp.39-59
• /
• 2007

The international involvement of a firm has been described as a gradual development process "a process in which the enterprise gradually increases its international involvement in many studies. This process evolves in the interplay between the development of knowledge about foreign markets and operations on one hand and increasing commitment of resources to foreign markets on the other." On the basis of Uppsala internationalization model, many studies strengthen strong theoretical and empirical support. According to the predictions of the classic stages theory, the internationalization process of firms have been recognized and characterized gradual evolution to foreign markets, so called stage theory: indirect & direct export, strategic alliance and foreign direct investment. However, termed "international new ventures" (McDougall, Shane, and Oviatt 1994), "born globals" (Knight 1997; Knight and Cavusgil 1996; Madsen and Servais 1997), "instant internationals" (Preece, Miles, and Baetz 1999), or "global startups" (Oviatt and McDougall 1994) have been used and come into spotlight in internationalization study of technology intensity venture companies. Recent researches focused on venture company have suggested the phenomenons of 'born global' firms as a contradiction to the stages theory. Especially the article by Oviatt and McDougall threw the spotlight on international entrepreneurs, on international new ventures, and on their importance in the globalising world economy. Since venture companies have, by definition. lack of economies of scale, lack of resources (financial and knowledge), and aversion to risk taking, they have a difficulty in expanding their market to abroad and pursue internalization gradually and step by step. However many venture companies have pursued 'Born Global Strategy', which is different from process strategy, because corporate's environment has been rapidly changing to globalization. The existing studies investigate that (1) why the ventures enter into overseas market in those early stage, even in infancy, (2) what make the different international strategy among ventures and the born global strategy is better to the infant ventures. However, as for venture's performance(growth and profitability), the existing results do not correspond each other. They also, don't include marketing strategy (differentiation, low price, market breadth and market pioneer) that is important factors in studying of BGV's performance. In this paper I aim to delineate the appearance of international new ventures and the phenomenons of venture companies' internationalization strategy. In order to verify research problems, I develop a resource-based model and marketing strategies for analyzing the effects of the born global venture firms. In this paper, I suggested 3 research problems. First, do the korean venture companies take some advantages in the aspects of corporate's performances (growth, profitability and overall market performances) when they pursue internationalization from inception? Second, do the korean BGV have firm specific assets (foreign experiences, foreign orientation, organizational absorptive capacity)? Third, What are the marketing strategies of korean BGV and is it different from others? Under these problems, I test then (1) whether the BGV that a firm started its internationalization activity almost from inception, has more intangible resources(foreign experience of corporate members, foreign orientation, technological competences and absorptive capacity) than any other venture firms(Non_BGV) and (2) also whether the BGV's marketing strategies-differentiation, low price, market diversification and preemption strategy are different from Non_BGV. Above all, the main purpose of this research is that results achieved by BGV are indeed better than those obtained by Non_BGV firms with respect to firm's growth rate and efficiency. To do this research, I surveyed venture companies located in Seoul and Deajeon in Korea during November to December, 2005. I gather the data from 200 venture companies and then selected 84 samples, which have been founded during 1999${\sim}$2000. To compare BGV's characteristics with those of Non_BGV, I also had to classify BGV by export intensity over 50% among five or six aged venture firms. Many other researches tried to classify BGV and Non_BGV, but there were various criterion as many as researchers studied on this topic. Some of them use time gap, which is time difference of establishment and it's first internationalization experience and others use export intensity, ration of export sales amount divided by total sales amount. Although using a mixed criterion of prior research in my case, I do think this kinds of criterion is subjective and arbitrary rather than objective, so I do mention my research has some critical limitation in the classification of BGV and Non_BGV. The first purpose of research is the test of difference of performance between BGV and Non_BGV. As a result of t-test, the research show that there are statistically efficient difference not only in the growth rate (sales growth rate compared to competitors and 3 years averaged sales growth rate) but also in general market performance of BGV. But in case of profitability performance, the hypothesis that is BGV is more profit (return on investment(ROI) compared to competitors and 3 years averaged ROI) than Non-BGV was not supported. From these results, this paper concludes that BGV grows rapidly and gets a high market performance (in aspect of market share and customer loyalty) but there is no profitability difference between BGV and Non_BGV. The second result is that BGV have more absorptive capacity especially, knowledge competence, and entrepreneur's international experience than Non_BGV. And this paper also found BGV search for product differentiation, exemption strategy and market diversification strategy while Non_BGV search for low price strategy. These results have never been dealt with other existing studies. This research has some limitations. First limitation is concerned about the definition of BGV, as I mentioned above. Conceptually speaking, BGV is defined as company pursue internationalization from inception, but in empirical study, it's very difficult to classify between BGV and Non_BGV. I tried to classify on the basis of time difference and export intensity, this criterions are so subjective and arbitrary that the results are not robust if the criterion were changed. Second limitation is concerned about sample used in this research. I surveyed venture companies just located in Seoul and Daejeon and also use only 84 samples which more or less provoke sample bias problem and generalization of results. I think the more following studies that focus on ventures located in other region, the better to verify the results of this paper.

• Journal of Technology Innovation
• /
• v.5 no.2
• /
• pp.1-21
• /
• 1997

The objective of this paper is to think about what structural reforms of the Korean government S&T development management system might be. Korean society is currently experiencing a drastic socio-economic transformation. The results of this transformation should be reflected on the determining process of the directions and breadths of structural reforms of government S&T development management system. Because the government system design will be based on the premises of socio-economic conditions under which administrative activities perform and also this socio-economic changes can influence on changes of the premises of government management system design. Moreover, S&T development management system is a subsystem of government system so that the directions of structural reform of those subsystems should be considered in the broad framework changes in the development management system of the government. For the last forty years, the Korean government S&T development management system has been based on the premises including transformation from an agrarian society to an industrial society, authoritarianism and centrally controlled institutions, and exteremely small portions of private investments for science and thechonology R & D of the total. Recently, however, the premises of Korean government S&T development management system have rapidly changed. the characteristics of these changes are including tranformation from an industrial society to a knowledge and information intensive society, globalization, localization, and relatively large portion of private investments for science and technology R & C of the total. The basis of government reforms in Korea was the realization of the performances and values through the enhancement of national competitive capacity, attainment of lean government, decentralization and autonomy. However, the Korean government has attached a symbolic value of strategic organizations representing strong policy intentions of government for the science and technology based development. Most problems associated with the Korean government S&T development management system have grown worse during 1990s. Many people perceive that considerable part of this problem was generated because the government could not properly adapt itself to new administrative environment and the paradigm shift in its role. First of all, the Korean government S&T development management system as a whole failed to develop an integrated vision under which processes in formulating science and thechology development goals and developing consistent government plans concerning science and technology development are guided. Second, most of the local governments have little organizational capacity and manpowers to handle localized activities to promote science and technology in their regions. Third, the measure to coordinate and set priorities to invest resources for the development of science and technology was not effective. Fourth, the Most has been losing its reputation as the symbol of ideological commitment of the top policy maker to promote science and technology. Various ideas to reform government S&T development management system have been suggested recently. Most frequently cited ideas are as follow : (ⅰ)strengthen the functions of MoST by supplementing the strong incentive and regulatory measures; (ⅱ)create a new Ministry of Education, Science & Technology and Research by merging the Ministry of Education and the MoST; (ⅲ)create a new Ministry of Science & Technology and Industry ; and(ⅳ)create a National Science and Technology Policy Council under the chairmanship of the President. Four alternatives suggested have been widely discussed among the interested parties and they each have merits as well as weaknesses. The first alternative could be seen as an alternative which cannot resolve current conflicts among various ministries concerning priority setting and resource allocation. However, this alternatives can be seen as a way of showing the top policymaker's strong intention to emphasize science and technology based development. Second alternative is giving a strategic to emphasize on the training and supplying qualified manpower to meet knowledge and information intensive future society. This alternative is considered to be consistent with the new administrative paradigm emphasizing lean government and decentralization. However, opponents are worrying about the linkages and cooperative research between university and industry could be weakening. The third alternative has been adopted mostly in nations which have strong basic science research but weak industrial innovation traditions. Main weakness of this alternative for Korea is that Korean science and technology development system has no strong basic science and technology research traditions. The fourth alternative is consistent with new administrative paradigms and government reform bases. However, opponents to this alternative are worried that the intensive development of science and technology because of Korea's low potential research capabilities in science and technology development. Considerning the present Korean socio-economic situation which demands highly qualified human resources and development strategies which emphasizes the accumulations of knowledge-based stocks, I would like to suggest the route of creating a new Ministry of Education, Science & Technology and Research by intergrating education administration functions and science & technology development function into one ministry.