• Journal of Bio-Environment Control
• /
• v.26 no.4
• /
• pp.346-352
• /
• 2017

In this study, we analyzed environmental factors including annual fruit growth and meteorological conditions in Suwon area from 2000 to 2014 to develop and verify a fruit width prediction model in 'Fuji' apple. The 15-year average of full bloom data was April 28 and that of fruit development period was 181 days. The fruit growth until 36 days after full bloom followed single sigmoid curve. The environmental factors affecting fruit width were BIO2, precipitation in September, the average of daily maximum and minimum temperature in April, minimum temperature in August, and growing degree days (GDD) in April. Among them, the model was constructed by combining BIO2 and precipitation in September, which are not cross-correlated with each other or, with other factors. And then, the final model was selected as 19.33095 + (5.76242 ${\times}$ BIO2) - (0.01891 ${\times}$ September precipitation) + (2.63046 ${\times}$ minimum temperature in April) which was the most suitable model with AICc of 92.61 and the adjusted $R^2$ value of 0.53. The model was compared with the observed values f rom 2000 to 2014. As a result, the mean difference between the measured and predicted values of 'Fuji' apple fruit width was ${\pm}2.9mm$ and the standard deviation was 3.54.

• Fire Science and Engineering
• /
• v.34 no.1
• /
• pp.11-17
• /
• 2020

As performance-based design (PBD) has a direct impact on evacuation safety assessments, designing fire scenarios based on real fire tests is essential. To improve the reliability of the PBD for fire safety in multiplexes, information on fire behavior, such as heat release rate (HRR) and fire spread rate, are provided in this study by conducting a standard fabric flammability test. To this end, several chairs were arranged in a pattern that resembled a theater-style seating. The peak HRR and heating value per unit mass for each chair ranged from 415 kW to 988 kW and 15.2 MJ/kg to 23.8 MJ/kg, respectively. The heating values per unit mass of the new and old chairs were 23.6 MJ/kg and 16.7 MJ/kg, respectively. As the quantity of plastic and cushioning materials in the new chairs was more than that of the old ones, the new chairs were more vulnerable to fire hazards. Furthermore, when the chairs were arranged in a line, the fire spread rate was observed to be 0.39-0.42 m/min, regardless of the ignition location. Finally, a fire growth curve showing the peak HRR and fire spread rate was also demonstrated.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.4
• /
• pp.333-340
• /
• 2019

This study attempted to eatablish a high performance liquid chromatography (HPLC) analysis method for the determination of avicularin, quercitrin as a part of the quality control for the development of functional cosmetic materials from Astilbe chinensis extract. HPLC was performed on a Capcell Pak C₁₈ MGII column with a gradient elution of 0.05% (v/v) trifluoroacetic acid (TFA) and acetonitrile at a flow rate of 1.0 mL/min at 30 ℃. The analyte was detected at 254 nm. The HPLC method was performed in accordance with the international conference on harmonization (ICH) guideline (version 4, 2005) of analytical procedures with respect to specificity, precision, accuracy, and linearity. The limits of detection and quantitation of avicularin and quercitrin were 0.094 and 0.285 mg/mL, 0.031 and 0.095 mg/mL respectively. Calibration curves showed good linearity r² > 0.99990 for avicularin and r² > 0.99994 for quercitrin. Precision of analysis was satisfied with less than 0.59% for avicularin and 0.63% for quercitrin. Recoveries of quantified compounds ranged from 100.97 to 101.77% for avicularin and 100.18 to 100.32% for quercitrin. These result indicated that the established HPLC method is very useful for the determination of marker compounds in A. chinensis extracts.

• Journal of the Microelectronics and Packaging Society
• /
• v.15 no.4
• /
• pp.51-57
• /
• 2008

In this paper, wetting and interfacial reaction properties for low Ag containing Sn-Ag-Cu Pb-free solder alloy, i.e., Sn-0.3Ag-0.7Cu were investigated and compared with those of Sn-1.0Ag-0.5Cu and Sn-3.0Ag-0.5Cu. Melting behavior and stress-strain curves of some Sn-xAg-xCu alloys were also measured using a differential scanning calorimeter(DSC) and a tensile test machine, respectively. In order to enhance insufficient wetting properties of Sn-0.3Ag-0.7Cu alloy, the improvement of wetting properties were analyzed by applying fluxes containing higher content of halide or indium adding of 0.2wt.% into the solder alloy. It was concluded that the small addition of indium is more effective for the improvement of wettability in low temperature range of $230{\sim}240^{\circ}C$ than applying flux containing higher content of halide.

• Journal of Environmental Policy
• /
• v.11 no.3
• /
• pp.49-65
• /
• 2012

Road traffic noise is closely related to road traffic environment, including traffic volumes by type and travel speed. In this study, we stated some issues and analyzed the relationships between road traffic noise and traffic flow characteristics. First, in attempt to find the answer to the question "When does the loudest traffic noise occur?" we reviewed the issue in the terms of traffic flow. As a result of analyzing level of service through Korea Highway Traffic Noise model, the actual maximum noise occurred in level of service D rather than level of service E, on the capacity state. It shows that maximum noise would be most likely to occur right before and after the peak hours. Second, this paper was looking for the method of a more easy and accurate traffic speed estimation to predict traffic noise. This paper proposed sketch planning techniques of speed-volume curve by level of service on Korea Highway Capacity Manual. As a result of trend line modeling, it was judged that quadratic form is a suitable function, and coefficient of determination ($R^2$) was higher than 0.96, respectively.

• Journal of Life Science
• /
• v.19 no.6
• /
• pp.799-803
• /
• 2009

The killing of male germ cells by radiation and other toxicants has recently been attributed to apoptosis, but a critical evaluation of the presence of the different features of apoptosis in each epithelial stage has not been performed. In this study, mouse testes exposed to radiation were examined by light microscopy and terminal transferase-mediated end labeling (TUNEL) with periodic acid-Schiff (PAS) stains to determine whether the cells were apoptotic according to several criteria. Apoptosis was easily recognized by the presence of peroxidase-stained, entirely apoptotic bodies. In the TUNEL-positive cells or bodies, the stained products correlated precisely with the typical morphologic characteristics of apoptosis as seen at the light microscopic level. The changes that occurred from 0 to 24 hours after exposing the mice to 2 Gy of gamma-rays (2 Gy/min) were examined. The numbers of apoptotic cells reached a peak at 12 hours after irradiation and then declined. The mice that received 0-8 Gy of gamma-rays were examined 8 hours after irradiation. Dose-response relationships were generated for each stage of the epithelial cycle by counting TUNEL-positive cells. The dose-response curves were linear- quadratic [y=(-0.014${\pm}$0.009)$D^{2}$+(0.31${\pm}$0.697)D+0.3575. Where y=the number of apoptotic cells per seminiferous tubule, and D=the irradiation dose in Gy, $r^{2}$=0.9] and there was a significant relationship between the frequency of apoptotic cells and the radiation dose. Although the maximum response was produced by 8 Gy, even 0.5 Gy induced marked changes. These changes were most pronounced in B spermatogonia of stage V and the spermatocyte at the mitotic cells of stage XII.

• Membrane Journal
• /
• v.18 no.3
• /
• pp.191-197
• /
• 2008

In this study, we used hybrid module that was composed of packing granular activated carbon (GAC) between module inside and outside of ceramic microfiltration membrane for advanced drinking water treatment. Instead of natural organic matters (NOM) and fine inorganic particles in natural water source, synthetic water was prepared with humic acid and kaolin. Packing fraction of GAC was changed from 0 to 24.05% to see effect of packing fraction. As a result, changing curves of resistance of membrane fouling ($R_f$) and permeate flux (J) during 3 h operation were almost overlapped independent of packing fraction of GAC. Treatment efficiencies of turbidity were very high above 99.46% at all packing fractions of GAC. And treatment efficiency of NOM, which was measured by $UV_{254}$ absorbance, was the highest value of 99.43% at packing fraction of 24.05%. Then, we operated the hybrid process during 13 h at packing fraction of 24.05%. As a result, J was rapidly dropped according to increase of membrane fouling within initial 1 h of operation, and almost constant after 3 h. And treatment efficiencies of turbidity and NOM were stable and high values of 99.52% and 96.63%, respectively.

• The Korean Journal of Nuclear Medicine
• /
• v.28 no.3
• /
• pp.371-376
• /
• 1994

To reevaluate the clinical usefulness of erection penography for diffential diagnosis of impotence, we reviewed retrospectively the data of penography in 56 patients who were diagnosed as impotence by various diagnostic workup. Twelve normal males were studied as control group. Papaverine HCl 30mg was injected into the corpus cavernosum and simultaneously $^{99m}Tc$-HSA 20mCi was injected via an antecubital vein. After injection radioactivities in the penile area were detected for 30 minutes by gamma camera and time activity curve was displayed. We defined that transit time(TT) is the time to reach peak activity and erection persistent time(EPT) is the duration of time to maintain peak activity and venous index(VI) is the ratio of radioactivity($R_{30}/R_{max}$). The results were as follows. The TT of arteriogenic group($10.7{\pm}2.8min$) was significantly increased compared with those of control and venogenic groups(P<0.05, respectively). The EPT of venogenic group ($6.2{\pm}6.8min$) is significantly decreased compared with those of control and arteriogenic groups(P<0.05, respectively). The TT of psychogenic($15.2{\pm}5.5min$) is significantly increased compared with those of control and arteriogenic groups(P<0.05, respectively). In conclusion erection penography was very useful for the diagnosis of vascular and psychogenic impotence and for differentiation between arteriogenic and venogenic but it could not differentiate mixed type or neurogenic from vascular or psychogenic.

• Analytical Science and Technology
• /
• v.25 no.5
• /
• pp.313-323
• /
• 2012

We have developed analysis method of PFCs in river water and sediment, and determined seven species of PFCs such as PFBS, PFHxS, PFOS, PFHpA, PFOA, PFNA and PFDA. Water and sediment samples were collected from 21 and 13 different sites along the Nakdong, Seomjin and Nam River, respectively. The water samples were pretreated with HLB cartridge and sediment samples were concentrated after extracted by sonication, and the levels of PFCs were determined by LC-MS/MS. The coefficient of determination ($R^2$) values of calibration curves were higher than 0.99. The method detection limits ranged 0.09~0.63 ng/L in water and 0.013~0.020 ng/g in sediment. The recovery rates of PFCs was found to be 74~98% for water and 87~111% for sediment. PFOA was the major species in water samples and followed by PFHpA and PFOS. In sediment, PFOA, PFOS and PFDA showed similar levels. Both water and sediment samples collected from the Nakdong River showed the highest concentrations of PFCs among the three rivers.

• Journal of Life Science
• /
• v.17 no.2 s.82
• /
• pp.266-271
• /
• 2007

Bisphenol A (BPA) has been widely used as a monomer for production of epoxy resins and polycarbonate plastics. The annual production of BPA exceeds 640,000 metric tons in worldwide. BPA, a suspected phenolic endocrine disrupter, is moderately soluble and frequently detected in industrial wastewater. To date, HPLC and GC has been used for BPA analysis. However, HPLC and GC-analysis need high operation lost, experts, and an elaborate pre-treatment of samples, and is difficult to apply on-time and mass analysis. Therefore, simple, mass and rapid detection of BPA in environments is necessary. In the present study, spectrophotometric method of BPA quantification was developed. Based on blue-color product formation with BPA and ferric chloride/ferricyanide under the optimized conditions, the standard curve was acquired $({\lambda}_{750}=0.061\;BPA\;[{\mu}M]+0.07155,\;R^2=0.992)$. Using an established method, the BPA contents in the soil extract, and different water samples and living products, including disposable syringe, cup and plastic tube, were analyzed. The results suggested that the method is useful for BPA determination from different massive samples. Since the BPA metabolites, nontoxic 4-hydroxyacetophenone or 4-hydroxybenzaldehyde, did not form blue-color product, this method is also useful to screen a microorganism for BPA bioremediation.