• 광물과 암석
• /
• 제35권4호
• /
• pp.507-520
• /
• 2022

지질과학 분야에서 암석의 생성 시기, 지각과 맨틀 진화연구의 기초자료로 활용되는 Sr 동위원소비는 열이온화 질량분석기(thermal ionization mass spectrometry, TIMS) 혹은 다검출기 유도결합 플라즈마 질량분석기(multi-collector plasma ionization mass spectrometry, MC-ICP-MS)와 같은 질량분석기를 이용하여 측정할 수 있다. 이 기술보고에서는, Sr 동위원소비 측정시, 원소의 불완전한 화학적 분리가 Sr 동위원소비의 참값 (true value)에 어떤 영향을 미치는지를 비교하였다. 실험에는 상업용 레진, NBS987(NIST SRM987) Sr 동위 원소 표준물질 그리고 일본지질조사소의 암석표준시료 JG1a, JB3, JA1를 이용하였다. 비교실험 결과, NBS987 Sr 동위원소 표준시료, 일본지질조사소의 암석표준시료 JG1a, JB3, JA1 모두 불완전한 분리에 의해 Rb이 남아있는 경우 ⁸⁷Sr/⁸⁶Sr의 측정값이 변하는 것이 명확하게 관찰된다. 이는 질량분석기 특히 MC-ICP-MS로 동위 원소비를 측정하고자 하는 경우, 동종동위원소의 간섭에 대한 보정에도 불구하고 측정값은 참값에서 벗어나므로 완전한 분리가 중요한 인자임을 지시해준다. 그러므로 MC-ICP-MS를 이용한 Sr 동위원소비 측정결과를 보고할 때는, 동종동위원소에 의한 영향을 판단할 수 있도록 Sr의 동위원소 전체의 측정강도와 더불어 ⁸⁵Rb의 측정강도도 함께 보고돼야 할 것이다.

• Nutritional Sciences
• /
• 제6권4호
• /
• pp.239-245
• /
• 2003

The $\beta$3-adrenergic receptor ($\beta$3AR) plays a major role in thermogenesis and lipolysis in brown and visceral adipose tissue, and has been implicated in the pathogenesis of obesity and metabolic disorders. The purpose of this study was to estimate the effects of $\beta$3AR gene polymorphism on the risk of hyperglycemia in 980 Korean women who attended a weight loss program in a local clinic. Each subject s height, weight, BMI, WHR, obesity index and body composition were measured. The genotype of the $\beta$3AR gene in codon 64 was analyzed by the PCR RFLP method. Serum concentrations of fasting glucose, of total and HDL cholesterol, and of TG were determined. Genotype distributions were as follows : 67% WW type, 31% WR type, and 2% RR type. Among the many measured parameters, fasting glucose levels were significantly higher in the WR/RR type compared with the WW type (p=0.0ll). When the subjects were divided into two groups by a fasting blood glucose level higher or lower than 6.105mmol/L (110mg/dl), the frequency of hyperglycemia showed a significant difference in relation to $\beta$3AR genotype as measured by $\X^2$-analysis (p=0.014); the frequency of hyperglycemia was significantly higher (at 24.8%) in WR/RR type subjects, compared to 18.2% in WW type subjects. When all of the measured parameters were included in stepwise logistic regression analyses to find the risk factors for hyperglycemia, the odds ratios for hyperglycemia were 1.573 (p=0.0ll) for the WR/RR type of the $\beta$3AR gene, 1.053 (p=0.001) for TG, 1.044 (p=0.037) for BMI, and 1.026 for age (p=0.031). These data suggest that the WR/RR genotype of the $\beta$3AR has a very strong association with increased blood glucose level and might be a significant risk factor for hyperglycemia among Korean women.

• 대한치과보철학회지
• /
• 제40권5호
• /
• pp.484-492
• /
• 2002

The selection of the maxillary anterior artificial teeth is made primarily for esthetics and they must be in harmony with the surrounding oral environment. However the selection of artificial teeth is based on the large degree of subjective judgement or the dentists, therefore, this is one of the most unscientific processes. This study was performed to determine clinically whether there is correlation among the width of the maxillary central incisor(WMCI), the intercanine distance (ICD) the facial width(FW), and the interalar nasal width(IAW) in Korean adults, and to provide the selection standards for the maxillary anterior artificial teeth. The casts were obtained from 91 undergraduate dental students(49 males and 42 females) with Angle's class I occlusion presenting well-arranged intact anterior teeth. The WMCI and ICD were measured on the casts with a vernier calipers($Miltex^{(R)}$, Germany). The photographic procedures under standardized conditions were performed to record each subject's frontal face using digital camera($Olympus^{(R)}$, C-2500L, Japan). The FW and IAW were measured with image analyzer($Image-Pro^{(R)}$ PLUS. media cybermetrics. USA). The results were obtained as follows : 1. The mean WMCI was $8.11{\pm}0.67mm$, ICD was $37.88{\pm}2.15mm$, FW was $141.29{\pm}5.84mm$. and IAW was $37.85{\pm}2.29 mm$. 2. The ratios of FW/WMCI, FW/ICD, IAW/ICD were 17.4, 3.7, 1.0 respectively. 3. All measurements(WMCI, ICD, FW, and IAW) of male group were longer than those of female group significantly in Student's t-test(p<0.01). 4. There was significant correlation between WMCI, ICD, FW, and IAW in Pearson's correlation analysis(p<0.01). 5, The relationship between IAW and ICD shows the strongest correlation among six combinations in linear regression analysis($R^2$=0.753, Y=7.046+0.815X). The FW and IAW could be very reliable guides for the selection of the maxillary anterior artificial teeth.

• Asian-Australasian Journal of Animal Sciences
• /
• 제25권2호
• /
• pp.272-277
• /
• 2012

Compensatory growth of grower olive flounder (Paralichthys olivaceus) was determined at suboptimal temperature ($13.0{\pm}1.9^{\circ}C$). Fifteen fish averaging 201.1 g per tank were distributed into 18 of 300 L flow-through tanks. Six treatments were prepared in triplicate: fish were hand-fed with an extruded pellet to apparent satiation once a day for 16 weeks (16 WF); and the other five groups of fish were hand-fed for 15, 14, 13, 12 and 10 weeks after 1-, 2-, 3-, 4- and 6-week feed deprivation, referred to as 15 WF, 14 WF, 13 WF, 12 WF and 10 WF, respectively. A linear relationship between body weight of fish and feed deprivation was observed: Y (Body weight of fish) = -1.81X (Weeks of feed deprivation)+201.07, $R^2$ = 0.83. Weight gain of grower olive flounder in 15 WF, 14 WF, 13 WF and 12 WF treatments was comparable to that of fish in 16 WF treatment, but lower than that of fish in 10 WF treatment. Specific growth rate of fish in 15 WF treatment was higher than that of fish in 16 WF, 14 WF and 10 WF treatments. Feed consumption of fish was not affected by feeding regime. Feed and protein efficiency ratios of fish in 15 WF treatment were higher than those of fish in 13 WF, 12 WF and 10 WF treatments. Grower olive flounder could achieve full compensatory growth when fish were daily fed for 12 weeks after 4-week feed deprivation at suboptimal temperature.

• International Journal of Concrete Structures and Materials
• /
• 제8권3호
• /
• pp.213-228
• /
• 2014

Alkali-activated binder (AAB) is recently being considered as a sustainable alternative to portland cement (PC) due to its low carbon dioxide emission and diversion of industrial wastes and by-products such as fly ash and slag from landfills. In order to comprehend the behavior of AAB, detailed knowledge on relations between microstructure and mechanical properties are important. To address the issue, a new approach to characterize hardened pastes of AAB containing fly ash as well as those containing fly ash and slag was adopted using scanning electron microscopy (SEM) and energy dispersive X-ray spectra microanalyses. The volume stoichiometries of the alkali activation reactions were used to estimate the quantities of the sodium aluminosilicate (N-A-S-H) and calcium silicate hydrate (CSH) produced by these reactions. The 3D plots of Si/Al, Na/Al and Ca/Si atom ratios given by the microanalyses were compared with the estimated quantities of CSH(S) to successfully determine the unique chemical compositions of the N-A-S-H and CSH(S) for ten different AAB at three different curing temperatures using a constrained nonlinear least squares optimization formulation by general algebraic modeling system. The results show that the theoretical and experimental quantities of N-A-S-H and CSH(S) were in close agreement with each other. The $R^2$ values were 0.99 for both alkali-activated fly ash and alkali-activated slag binders.

• Journal of Periodontal and Implant Science
• /
• 제50권3호
• /
• pp.197-206
• /
• 2020

Purpose: The aim of this study was to determine the impact of different compressive forces on deproteinized bovine bone mineral (DBBM) particles covered by native bilayer collagen membrane (NBCM) during alveolar ridge preservation (ARP) in the molar area, and to identify any histomorphometric and clinical differences according to the compressive force applied. Methods: Sockets were filled with DBBM after tooth extraction, and different compressive forces (30 N and 5 N, respectively) were applied to the graft material in the test (30 N) and control (5 N) groups. The DBBM in both groups was covered with NBCM in a double-layered fashion. A crossed horizontal mattress suture (hidden X) was then made. A core biopsy was performed using a trephine bur without flap elevation at the implant placement site for histomorphometric evaluations after 4 months. The change of the marginal bone level was measured using radiography. Results: Twelve patients completed the study. The histomorphometric analysis demonstrated that the mean ratios of the areas of new bone, residual graft material, and soft tissue and the implant stability quotient did not differ significantly between the groups (P>0.05). However, the mean size of the residual graft material showed a significant intergroup difference (P<0.05). Conclusions: The application of 2 compressive forces (5 N, 30 N) on particulate DBBM grafts during open-healing ARP in the posterior area led to comparable new bone formation, implant feasibility and peri-implant bone level.

• 산업식품공학
• /
• 제14권2호
• /
• pp.118-126
• /
• 2010

The fibrous material fraction as a by-product from the commercial aloe vera gel processing was obtained and freeze dried. The physicochemical characteristics such as the proximate composition, crystalline/surface structures and several physical functionalities including the water holding capacity (WHC), swelling capacity (SW), oil holding capacity (OHC), emulsion/foam properties and viscosity properties of this powdered sample (100 mesh) were investigated and analyzed by comparison with commercial $\alpha$-cellulose as a reference sample. The total dietary fiber content of powdered sample was very high as much as 87.5%, and the insoluble dietary and soluble dietary fiber content ratios were 77.6 and 22.4%, respectively. The FT-IR spectrum of powdered sample showed a typical polysaccharide property and exhibited a x-ray diffraction pattern for cellulose III and IV like structure. SW (8.24${\pm}$0.15 mL/g), WHC(6.40${\pm}$0.19 g water/g solid) and OHC(10.32${\pm}$0.29 g oil/g solid) of freeze dried aloe cellulose were about 3.3, 1.4 and 2 times higher than those of commercial $\alpha$-cellulose, respectively. Aloe cellulose (~2%, w/v) alone had no foam capacity while improved the foam stability of protein solution (1% albumin+0.5% $CaCl_{2}$) by factor of 300%. Emulsion capacity of 2%(w/v) aloe cellulose was about 70% level of 0.5%(w/v) xanthan gum, but its emulsion stability was about 1.2 times higher than that of xanthan gum. Also, aloe cellulose containing CMC (carboxyl methyl cellulose) of 0.3%(w/v) showed a very good dispersity. Aloe cellulose dispersion of above 1%(w/v) exhibited higher pseudoplasticity and concentration dependence than those of $\alpha$-cellulose dispersion, indicating the viscosity properties for new potential usage such as an excellent thickening agent.

• 한국자기학회지
• /
• 제13권5호
• /
• pp.187-192
• /
• 2003

IrMn에 Mn을 첨가시킨 N $i_{80}$F $e_{20}$/[I $r_{22}$M $n_{78}$-Mn] $Co_{75}$F $e_{25}$ 다층박막을 상온에서 이온빔 증착(ion beam deposition: IBD)법으로 제작하여 그 자기적 및 열적 특성을 연구하였다. Mn이 첨가된 NiFe/[IrMn-Mn]/CoFe다층박막은 Mn이 첨가되지 않은 순수 합금 IrMn 박막 위의 CoFe 고정층 보다 큰 교환결합력( $H_{ex}$)과 방해온도(blocking temperature: $T_{b}$)을 가지고 있었다. Mn이 첨가되지 않는 I $r_{22}$M $n_{78}$ 와 CoFe 사이의 $H_{ex}$는 상온에서 거의 없었으나, 25$0^{\circ}C$ 열처리 후 100 Oe로 나타났다. IrMn 내에서 76.8-78.1 vol% Mn일 때, $H_{ex}$와 $T_{b}$는 크게 향상되었고, Mn이 0.6 vol%씩 증가함에 따라 크게 줄어들었다. NiFe/[IrMn-Mn]/CoFe 다층박막 구조에서 [(111)CoFe, NiFe]/(111)IrM $n_3$인 x-선 회절 피크비 평균값은 75.5, 77.5, 79.3 vol% Mn일 때 각각 1.4, 0.8, 0.6였다. 특히, 열처리 전 77.5과 78.7 vol% Mn일 때, $H_{ex}$는 각각 259와 150 Oe였다. 77.5 vol% Mn인 경우, $H_{ex}$가 열처리 온도 35$0^{\circ}C$까지 475 Oe였으며, 450 $^{\circ}C$에서는 200 Oe로 크게 감소하였다. 따라서 합금형 반강자성체 IrMn에서 높은 $H_{ex}$와 $T_{b}$을 얻을 수 있는 최적의 Mn 함유량의 존재를 확인하였다.다.다. 확인하였다.다.하였다.다.

• 공업화학
• /
• 제17권2호
• /
• pp.183-187
• /
• 2006

리튬-이온 전지에서 전해질 용액에 대한 용매의 선택은 충방전 특성의 개선을 위해 매우 중요하다. 여러 가지 용매 시스템이 리튬-이온 전지의 전해질로서 광범위하게 연구 되어졌다. 본 연구는 다양한 혼합비에서 제조한 1 M $LiPF_6/EC$ (ethylene carbonate) : MA (methyl acetate) (x:y) 전해질 용액의 용매 분해 전위와 카본 부극 표면에 형성된 Solid Electrolyte Interphase 피막의 전기화학적 성질을 시간대 전위법, 순환 전압- 전류법, 임피던스법을 이용하여 관찰하였다. 용매분해 전위는 전해질의 이온 전도도에 따라 전위가 달라졌고, 용매의 혼합비에 따라 피막의 전기화학적 특성이 변화되었음을 확인하였다. 결과적으로, 1 M $LiPF_6/(EC+MA)$ 시스템에서 가장 적절한 EC와 MA의 혼합비는 대략 1:3 (EC:MA, 부피비)이었다.

• 한국수산과학회지
• /
• 제33권4호
• /
• pp.280-287
• /
• 2000

참보라색우무는 우리나라 연근해에서 쉽게 채취할 수 있는 미이용 해조류로서 해조류에서 새로운 천연항균성물질을 개발하기 위한 기초자료를 얻을 목적으로 항균성물질을 각종 칼럼을 통하여 분리정제하였으며, MS, NMR spectrum에 의하여 구조를 확인하였고, X선회절분석으로 결정구조를 해석하였다. 또한 이들 물질이 가지는 몇가지 특성을 조사하였다. 참보라색우무 670 g 중에서 최종적으로 세 개의 항균성물질(SL-l, SL-2, SL-3)이 각각 85 mg, 135 mg, 27.7 mg을 얻었다. SL-1 및 SL-2는 MS 및 NMR에 의하여 2,3,6-tribromof,5-dihydroxybenzyl alcohol (MW, 374) ,2,3,6-trib romo4,5-dihydroxybenzyl methyl ether (MW, 388)이였으며, 특히 SL-2를 벤젠-디에틸 에테르 용매중에서 결정화하여 X선 결정 해석에 의하여서도 구조가 확인되었다. 한편 SL-3는 SL-2와 MS 및 carbon NMR spectrum에서 잘 일치하였으나 proton NMR에서 signal의 패턴이 약간 달라 SL-2의 어떤 이성질체라고 추정되었다. 참보라색우무 항균성물질의 마우스에 대한 치사독성은 SL-1은 3 mg, SL-2는 5 mg까지는 별다른 영향을 미치지 않았으며, PhIP 및 MeIQx에 대한 돌연변이원성 억제효과는 SL-1은 $200 {\mu}g/ml$의 농도에서는 $17.8 {\%}$ 및 $17.7 {\%}$에 미치지 않았으나SL-2는 $250 {\mu}g/ml$의 농도에서는 높은 억제효과를 나타내어 새로운 보존료로서의 이용가능성을 제시하였다.