• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.130-135
• /
• 1995

We can consider that the study on early evaluation of strength of concrete is useful to raise safety of building and utility of quality control of concrete is useful to raise safety of building and utility of quality control of concrete. In this paper, was proposed to method early to predict strength of concrete with key parameters, such as Water/Cement(W/C) ratio and Sand / Aggregate(S/A) ratio. Through a series of experiment, the obtained results are summarized as follow. $\circled1$ The ratio of resistance was decteased as the increase of W/C ratio. $\circled2$ The maximum value for the ratio of resistance and compressive strength was presented in the case of 40% S/A ratio. $\circled3$ The relationship. of the ratio of resistance and compressive strength on 28days according to the change of W/C and S/A ratio is to be: $F_{28}=-0.00104R^2 + 2.263R - 935.5$ (W/C Ratio) $F_{28} = 0.007R^2 - 10.693R - 4269.1$ (S/A Ratio)

• 대한가정학회지
• /
• 제36권10호
• /
• pp.179-196
• /
• 1998

The purpose of this study was to analyze the financial status of Korean elderly households to make a financial plan for retirement preparation. The sample obtained from 1997 KHPS, consisted of 326 households of 55-64 aged and 210 households of 65 and over aged. Statistics employed for the analysis were frequencies, percentile, univariate analysis and logistic analysis. And Lorenz curve and Gini coefficient were used to compare the financial status. The results could be summarized as follows. First, total income, total expenditure, total debt and net worth of 55-64 aged group were higher than those of 65 and over group, while total asset of 55-64 aged group was similar to 65 and over group's Second, total expediture to total imcome ratio(R1) and total asset to total debt ratio(R4) of 55-64 aged group were higher than 65 and over group's, but net worth to minimum cost of living ratio(R2) and financial asset to monthly expenditure ratio(R3) of 65 and over group were higher than 55-64 aged group's . Third, R4's Gini coefficient was the highest and R1's Gini coefficient was the lowest among all Gini coefficients. Also, R1's and R4's Gini coefficients of 55-64 aged group were greater than 65 and over group's. ourth, variables affecting R1's stability of 55-64 aged group were household head's age, educatonal attainment and family type, while those of 65 and over group were household head's age, past economic experience and the number of children. There was no significant variable affecting R2's stability of 55-64 aged group, but there was only household head's pst economic experience affecting those of 65 and over group. The variable contributing to R3's stability of 55-64 aged group was residence while the variables of 65 and over group were household head's educational attainment, past economic experience and the number of children. The variables contributing to R4's stability of 55-64 aged group were the number of children and residence, and the number of children was one variable of contributing to R4's stability of 65 and over aged group.

• The Korean Journal of Physiology
• /
• 제3권1호
• /
• pp.19-28
• /
• 1969

Skin temperatures on 10 sites and rectal temperature at every 10 minutes, oxygen consumption at every 20 minutes were measured on 18 male subjects (ages between 14 and 47 years) after exposure to cold air at $15^{\circ}C$ for two hours in a climatic room. Total body fat measured by means of a skinfold method and ratio of body surface area (S) to body volume (V), S/V, were utilized as basis of observations. Surface area was calculated after DuBois equation and body volume was calculated by our original formula. In influencing on the heat loss from the body core to the cold environment, % fat showed inverse relations, whereas, S/V ratio showed direct relations. Thus these two factors acted antagonistically on the body heat loss. Local skin temperatures showed negative correlations with skinfold thickness on the same site, nemaly, on chest, r=-.567; on back, r=-.507; and on upper arm, r=-.353. The other 7 skin sites showed low correlations with % fat. Minimum mean weighted skin temperature (MWST) showed a negative correlation (r=-.443) with % fat, and showed no correlation with S/V ratio. Oxygen consumption in the cold air at $15^{\circ}C$ increased from the first measurement at 20 minutes after exposure and maintained the same increasing trend up to 120 minutes. ${\Delta}T_R$ was greater in tile lean subjects who showed a greater % change in oxygen consumption. The antagonistic actions of % fat and S/V ratio on the heat loss were manifested by observations as follows: minimum rectal temperature was higher In fat subjects (r=.600) and lower in subjects with a greater S/V ratio (=-.582), ${\Delta}T_R$ was smaller in fat subjects (r=-.738) and greater in subjects with a greater S/V ratio (r=.618). Temperature difference between body core and skin surface (minimum rectal temperature minus minimum MWST) showed a positive correlation with % fat (r=.600) and a negative correlation with S/V ratio (r=-.881). Decrease in the mean body temperature and heat debt, respectively, showed negative correlations with % fat and positive correlations with S/V ratio.

• 생태와환경
• /
• 제47권1호
• /
• pp.32-40
• /
• 2014

식물공장은 외부 환경요인에 관계없이 효율적인 공간활용을 통해 작물의 생산성 및 경제성을 극대화시켜 생산할 수 있는 획기적인 기술이다. 본 연구은 엽채류 중만추대 열풍적치마상추, 만추대 청치마상추, 그린 로메인상추, 그린골 양상추, 개량사또 쑥갓과 영진 청경채를 대상으로 식물공장에서 실험하였다. LED 시스템을 이용하여 광원의 종류를 적색, 청색, 적색+청색, 적색+청색+백색, 적색+적외선 혼합광으로 구성하였다. 적색+청색 혼합광에서 적색과 청색의 조사기간 비율은 1 : 1, 2 : 1, 5 : 1, 10 : 1로 구성하였고, duty 비는 100%, 99%, 97%로 구성하였다. 광원의 종류에 따른 결과 로메인상추에서 지상부 건중량과 S/R 비는 R+B 혼합광에서 가장 높았고, 양상추의 지하부 건중량과 쑥갓의 S/R 비는 R+B+W 혼합광에서 높았지만, 나머지 종에서는 차이가 없었다. 적색과 청색의 조사기간 비율에 따른 결과 청치마상추, 양상추와 청경체는 지상부 건중량, 총 건중량, S/R비가 비교적 적색의 비율이 높은 조건 (5 : 1)에서 가장 높았다. duty 비에 따른 결과 R+B 혼합광에서 쑥갓은 100%와 99%, 로메인은 100%와 97%일 때 지상부와 지하부, 총 건중량이 높았다. S/R 비는 엽채류 6종 모두 duty 비가 낮은 97%에서 높게 나와 낮은 duty 비에서도 양호한 생육을 보였다. R+B+W 혼합광에서 청치마상추와 로메인상추 그리고 청경채는 duty 비는 낮은 97%에서도 비교적 높은 지상부 건중량 및 총 건중량을 보였다. 또한, 로메인 상추와 양상추의 S/R 비는 duty 비가 97%인 조건에서 가장 높았다. 따라서 LED 시스템을 이용한 식물공장에서 각 엽채류 별로 적절한 광원과 광질을 이용하면 외부 환경요인에 관계없이 안정적인 재배를 할 수 있을 것이다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 봄 학술발표회 논문집
• /
• pp.136-141
• /
• 1995

The early evaluation on strength of concrete is useful to achieve on quality control and improvement of properties of concrete. Especially, we could say that the confidence of construction is increased by the increase durability and safety building, due to early evaluation. In this study, was proposed to ultra-sonic pulse method as a early evaluation method for strength of concrete with main parameter, sush as W/C ratio and S/A ratio. The experiment results are summarized to follow as : $\circled1$ The ultra-sonic pulse was decreased as the increase of W/C ratio. $\circled2$ The maximum value for the ultra-sonic pulse velocity and compressive strength was presented in the case of 40% S/A ratio and these value was decreased as the change of S/A ratio over 40% $\circled1$ The relationship of the ultra-sonic pulse velocity and compressive strength on 28days according to the change of W/C and S/A ratio is to be: $F_{28} = -209193R^2 + 384417R - 1763441$(W/C Ratio) $F_{28} = 1726R^2 - 774R - 502 (S/A Ratio)

• 설비공학논문집
• /
• 제4권2호
• /
• pp.123-136
• /
• 1992

A preliminary thermodynamic design model of two-evaporator refrigerator/freezer system is constructed. This system is based on Lorentz-Meutzner cycle using refrigerant mixtures. This model screens alternative refrigerant (R32, R125, R143a, R22, R134a, R152a, R124, R142b, R123) mixtures to select the best performance-giving refrigerant mixtures and its composition for the system. Also, it estimates the effects of cooling temperatures of intercoolers, evaporator's area ratio, cooling load ratio on the performance of the system. The COP of the system ranges from 1.4 to 1.6, which is superior to that of the single evaporator system charged with R12 by 13% to 29%. Among 15 mixtures, R22/R123, R143a/R123, R32/R142b, and R32/R124 (in the order of high COP) are most recommendable. For the case of R22/R123, R22 mass fraction more than 0.5(Load Ratio=1.0) or 0.7(Load Ratio=0.33) is recomended in order to replace R12 without reduction in volumetric capacity when keeping the compressor as the same one. COP has the highest value with X(R22)=0.7 and 0.8, respectively. For the case of R143a/R123, in the similar manner, mass fraction of R143a is more than 0.5 or 0.6 while best performance occurs at X(R143a)=0.8. Higher temperature intercooler is more important for the performance of the system than lower temperature intercooler. The area ratio of evaporators is roughly proportional to load ratio of the evaporators.

• 한국가정과학회지
• /
• 제4권1호
• /
• pp.36-45
• /
• 2001

This study was performed to determine the changes of maternal iron status during pregnancy cross sectionally, and to evaluate the appropriateness of the cut-off points of hemoglobin (Hb). hematocrit (Hct), serum transferrin receptor (sTfR) and sTfR : ferritin ratio for assessing iron deficiency status based on serum ferritin level (< 12${\mu}g$/L). Serum Hb concentrations in the first trimester were significantly higher (p < 0.05) than those in the second and third trimester. Serum levels of iron and ferritin in the third trimester were significantly lower (p < 0.05) than those in the first and second trimester. On the other hand, sTfR:ferritin ratios in the third trimester were significantly higher (p < 0.05) than those in the first and second trimester. sTfR concentrations did not change significantly during pregnancy. The appropriate cut-off points of Hb were 11.5g/dL for whole period of pregnancy. 12.0g/dL for 1st trimester. and 11.5g/dL for both 2nd and 3rd trimester. The good cut-off points of Hct were 34% for whole period of pregnancy. 36% for 1st trimester. and 34% for both 2nd and 3rd trimester The suitable cut-off points of TIBC were 400${\mu}g$/dL for whole period of pregnancy. 360${\mu}g$/dL for 1st trimester, and 400${\mu}g$/dL for both 2nd and 3rd trimester. Any cut-off point of sTfR could not be selected because of its low sensitivity and specificity. The proper cut-off point of sTfR : ferritin ratio was 600 or 650 for all the periods determined except the first trimester. In conclusion, there were no reliable cut-off levels of sTfR and those of sTfR : ferritin ratio showed low specificity. The cut-off values of Hb and Hct for assessing iron deficiency were slightly higher than the values used to evaluate anemia. Thus, if appropriate cut-off levels were applied, Hb. Hct, or TIBC might be useful indices for evaluating iron deficiency as well as anemia.

• 문화기술의 융합
• /
• 제9권3호
• /
• pp.779-787
• /
• 2023

본 연구는 국민연금의 소유지분비율과 투자대상기업의 기업가치 간 관계에서, 투자대상기업이 R&D 투자를 늘리도록 독려하여 기업가치의 제고를 간접적으로 꾀할 수 있을 것으로 판단하여 R&D 투자 정도의 매개효과를 분석하였고, 2018년 7월 스튜어드십 코드의 도입에 따라 투자대상회사에 대한 R&D 투자 및 기업가치 향상 압박이 도입 전에 비해 더 커졌을 것으로 판단하여 위 매개효과에 스튜어드십 코드 도입이 미칠 조절효과를 분석하였다. 2016년부터 2021년까지의 한국 상장회사 자료들을 활용하여 분석한 결과, 국민연금의 소유지분비율과 기업가치 간 관계에서 R&D 투자의 부분적 매개효과가 존재하고, 국민연금의 스튜어드십 코드 도입은 소유지분비율과 R&D 투자와의 관계, 소유지분비율과 기업가치와의 관계를 모두 강화시켜 조절효과가 존재함을 확인했다. 이는 국민연금의 스튜어드십 코드 도입 전후에 따라 소유지분비율과 기업가치 간 관계에서 R&D 투자 정도의 매개효과가 달라지는, 조절된 매개효과가 존재하는 것으로 나타났다.

• 대한지역사회영양학회:학술대회논문집
• /
• 대한지역사회영양학회 2000년도 추계학술대회:통일한국을 대비한 영양감시체계 개발
• /
• pp.62-62
• /
• 2000

• 대한기계학회논문집B
• /
• 제21권6호
• /
• pp.725-734
• /
• 1997

The effect of helical intake port geometry on in-cylinder swirl flow characteristics was studied. Two helical intake ports were selected to change swirl ratio, mean flow coefficient with the variation of valve lifts, valve eccentricity ratios and axial distance. The measurements were made by using an impulse swirl meter. The port B modified to increase the swirl ratio( $R_{s}$) had the tendency of the increased non-dimensional rig swirl ( $N_{r}$) distribution in comparison with that of the port A. And the $N_{r}$ distribution was remarkably improved at low valve lifts. The modification of the geometry to increase the swirl ratio ( $R_{s}$) in helical intake port resulted in the decrease of the mean flow coefficient ( $C_{f(mean)}$) regardless of valve eccentricity ratio ( $N_{y}$). And also non-dimensional rig swirl ( $N_{r}$) in the high valve lift affected the calculation of swirl ratio considerably.onsiderably.