• 제목/요약/키워드: R&D input

검색결과 744건 처리시간 0.034초

광 색역 디스플레이 장치의 색역 사상에 관한 연구 (A Study on the Gamut Mapping Method of the Wide Gamut Display Device)

  • 엄진섭;신윤철;김문철
    • 대한전자공학회논문지SP
    • /
    • 제42권2호
    • /
    • pp.69-80
    • /
    • 2005
  • 최근 영상 및 광학 소자 산업의 발달과 디지털 방송으로 TV등의 디스플레이 장치들이 슬림화 및 대형화되는 추세에 따라 기존 CRT를 대신하고 있다. 특히 LED, Laser등을 이용한 광 색역 디스플레이 장치들은 CRT에서는 표현할 수 없는 고채도의 색을 표시한 수 있는데 기존의 TV신호를 그대로 적용할 경우 색상의 왜곡이 큰 부작용으로 작용한다. 따라서 본 논문에서는 이와 같은 광 색역 디스플레이 장치에서 색상의 왜곡을 없애고 기존 CRT에 비해 넓은 색역을 충분히 활용할 수 있는 색역 사상에 대하여 연구하였다. 색역 사상은 동일색상에서 채도를 향상 시키는 방법이 일반적으로 사용되나 채도의 과도 상승으로 인한 부작용이 나타난 수 있다. 따라서 본 논문에서는 이러한 부작용을 방지하기 위해 밝기와 채도를 같이 상승 시키는 벡터 사상을 제안 하고자 한다. 이 벡터 사상은 색도가 변하지 않아서 영상이 보다 자연스럽다는 장점이 있다. 또 입력과 출력 색역의 기하학적 특성에 따라서 발생할 수 있는 계조 뭉침이나 윤곽선 효과를 색역 맞춤을 통해 보상하였다. 이와 같은 색역 사상과 색역 맞춤을 이용하여 광색역 디스플레이에서 색상 왜곡을 방지하고 자연스러운 영상을 재현할 수 있다.

20kHz 급 금속 초음파 융착용 스텝형 바 혼의 최적설계 (Analysis of Optimum Design of Stepped Bar Horn for 20kHz Metal Ultrasonic Welding)

  • 김지선;김재웅;김인주;서주환
    • 한국산학기술학회논문지
    • /
    • 제20권12호
    • /
    • pp.94-101
    • /
    • 2019
  • 본 연구에서는 초음파 용접기의 진동에너지를 모재에 전달하는 금속 용접용 혼의 형상설계를 위해 해석적 기법을 적용하였으며, 20kHz 영역에서 사용되는 한파장 바 형상을 갖는 용접용 혼의 형상설계를 위해 FEM(Finite Element Method)을 사용하였다. 봉의 종진동 이론을 Ansys APDL(Ansys Parametric Design Language)에 적용하여 혼의 형상을 최적화하였다. 적절한 혼의 형상을 도출하기 위해 진동의 입력면과 출력면의 면적비와 혼의 축방향 길이비를 이용하여 총 25가지의 모델을 설계하였으며, Modal 해석과 Harmonic 해석을 통해 균일한 진동특성을 확보하고자 하였다. 스텝 바혼의 끝단부(팁)의 균일도 90%이상을 확보하기 위해 Harmonic 해석을 통해 길이비, 면적비를 결정하였고 이에 따라 혼의 총길이 130mm, 스텝 길이 65mm, 출력단 면적 28.79mm의 혼을 설계하였다. 설계치수를 바탕으로 Titanium (Ti-6Al-4V)-GR5 재료를 이용하여 혼을 제작하였다. 또한, 별도로 구성된 초음파 용접시스템을 이용하여 혼의 끝단부의 진동 진폭률 및 변위특성을 평가하였다. 최적화된 혼의 진폭률은 51%까지 향상됨을 확인하였다. 최종적으로 균일한 종방향 스텝 바혼을 설계하였으며, 끝단부(팁)의 균일도 97.4%이상을 확보하였다.

Research on the Multi-electrode Plasma Discharge for the Large Area PECVD Processing

  • Lee, Yun-Seong;You, Dae-Ho;Seol, You-Bin
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
    • /
    • pp.478-478
    • /
    • 2012
  • Recently, there are many researches in order to increase the deposition rate (D/R) and improve film uniformity and quality in the deposition of microcrystalline silicon thin film. These two factors are the most important issues in the fabrication of the thin film solar cell, and for the purpose of that, several process conditions, including the large area electrode (more than 1.1 X 1.3 (m2)), higher pressure (1 ~ 10 (Torr)), and very high frequency regime (VHF, 40 ~ 100 (MHz)), have been needed. But, in the case of large-area capacitively coupled discharges (CCP) driven at frequencies higher than the usual RF (13.56 (MHz)) frequency, the standing wave and skin effects should be the critical problems for obtaining the good plasma uniformity, and the ion damage on the thin film layer due to the high voltage between the substrate and the bulk plasma might cause the defects which degrade the film quality. In this study, we will propose the new concept of the large-area multi-electrode (a new multi-electrode concept for the large-area plasma source), which consists of a series of electrodes and grounds arranged by turns. The experimental results with this new electrode showed the processing performances of high D/R (1 ~ 2 (nm/sec)), controllable crystallinity (~70% and controllable), and good uniformity (less than 10%) at the conditions of the relatively high frequency of 40 MHz in the large-area electrode of 280 X 540 mm2. And, we also observed the SEM images of the deposited thin film at the conditions of peeling, normal microcrystalline, and powder formation, and discussed the mechanisms of the crystal formation and voids generation in the film in order to try the enhancement of the film quality compared to the cases of normal VHF capacitive discharges. Also, we will discuss the relation between the processing parameters (including gap length between electrode and substrate, operating pressure) and the processing results (D/R and crystallinity) with the process condition map for ${\mu}c$-Si:H formation at a fixed input power and gas flow rate. Finally, we will discuss the potential of the multi-electrode of the 3.5G-class large-area plasma processing (650 X 550 (mm2) to the possibility of the expansion of the new electrode concept to 8G class large-area plasma processing and the additional issues in order to improve the process efficiency.

  • PDF

배수개선공법개발에 관한 연구(I) -각종 지하배수용 암거재료의 배수성능- (Drainage Performance of Various Subsurface Drain Materials-)

  • 김철회;이근후;유시조;서원명
    • 한국농공학회지
    • /
    • 제21권3호
    • /
    • pp.104-120
    • /
    • 1979
  • I. Title of the Study Studies on the Development of Improved Subsurface Drainage Methods. -Drainage Performance of Various Subsurface Drain Materials- II. Object of the Study Studies were carried out to select the drain material having the highest performance of drainage; And to develop the water budget model which is necessary for the planning of the drainage project and the establishment of water management standards in the water-logged paddy field. III. Content and Scope of the Study 1. The experiment was carried out in the laboratory by using a sand tank model. The drainage performance of various drain materials was compared evaluated. 2. A water budget model was established. Various parameters necessary for the model were investigated by analyzing existing data and measured data from the experimental field. The adaptability of the model was evaluated by comparing the estimated values to the field data. IV. Results and Recommendations 1. A corrugated tube enveloped with gravel or mat showed the highest drainage performance among the eight materials submmitted for the experiment. 2. The drainage performance of the long cement tile(50 cm long) was higher than that of the short cement tile(25 cm long). 3. Rice bran was superior to gravel in its' drain performance. 4. No difference was shown between a grave envelope and a P.V.C. wool mat in their performance of drainage. Continues investigation is needed to clarify the envelope performance. 5. All the results described above were obtained from the laboratory tests. A field test is recommended to confirm the results obtained. 6. As a water balance model of a given soil profile, the soil moisture depletion D, could be represented as follows; $$D=\Sigma\limit_{t=1}^{n}(Et-R_{\ell}-I+W_d)..........(17)$$ 7. Among the various empirical formulae for potential evapotranspiration, Penman's formular was best fit to the data observed with the evaporation pans in Jinju area. High degree of positive correlation between Penman;s predicted data and observed data was confirmed. The regression equation was Y=1.4X-22.86, where Y represents evaporation rate from small pan, in mm/100 days, and X represents potential evapotranspiration rate estimated by Penman's formular. The coefficient of correlation was r=0.94.** 8. To estimate evapotranspiration in the field, the consumptive use coefficient, Kc, was introduced. Kc was defined by the function of the characteristics of the crop soil as follows; $Kc=Kco{\cdot}Ka+Ks..........(20)$ where, Kco, Ka ans Ks represents the crop coefficient, the soil moisture coefficient, and the correction coefficient, respectively. The value of Kco and Ka was obtained from the Fig.16 and the Fig.17, respectively. And, if $Kco{\cdot}Ka{\geq}1.0,$ then Ks=0, otherwise, Ks value was estimated by using the relation; $Ks=1-Kco{\cdot}Ka$. 9. Into type formular, $r_t=\frac{R_{24}}{24}(\frac{b}{\sqrt{t}+a})$, was the best fit one to estimate the probable rainfall intensity when daily rainfall and rainfall durations are given as input data, The coefficient a and b are shown on the Table 16. 10. Japanese type formular, $I_t=\frac{b}{\sqrt{t}+a}$, was the best fit one to estimate the probable rainfall intensity when the rainfall duration only was given. The coefficient a and b are shown on the Table 17. 11. Effective rainfall, Re, was estimated by using following relationships; Re=D, if $R-D\geq}0$, otherwise, Re=R. 12. The difference of rainfall amount from soil moisture depletion was considered as the amount of drainage required. In this case, when Wd=O, Equation 24 was used, otherwise two to three days of lag time was considered and correction was made by use of storage coefficient. 13. To evaluate the model, measured data and estimated data was compared, and relative error was computed. 5.5 percent The relative error was 5.5 percent. 14. By considering the water budget in Jinju area, it was shown that the evaporation amount was greater than the rainfall during period of October to March in next year. This was the behind reasonning that the improvement of surface drainage system is needed in Jinju area.

  • PDF

Application case for phase III of UAM-LWR benchmark: Uncertainty propagation of thermal-hydraulic macroscopic parameters

  • Mesado, C.;Miro, R.;Verdu, G.
    • Nuclear Engineering and Technology
    • /
    • 제52권8호
    • /
    • pp.1626-1637
    • /
    • 2020
  • This work covers an important point of the benchmark released by the expert group on Uncertainty Analysis in Modeling of Light Water Reactors. This ambitious benchmark aims to determine the uncertainty in light water reactors systems and processes in all stages of calculation, with emphasis on multi-physics (coupled) and multi-scale simulations. The Gesellschaft für Anlagen und Reaktorsicherheit methodology is used to propagate the thermal-hydraulic uncertainty of macroscopic parameters through TRACE5.0p3/PARCSv3.0 coupled code. The main innovative points achieved in this work are i) a new thermal-hydraulic model is developed with a highly-accurate 3D core discretization plus an iterative process is presented to adjust the 3D bypass flow, ii) a control rod insertion occurrence -which data is obtained from a real PWR test- is used as a transient simulation, iii) two approaches are used for the propagation process: maximum response where the uncertainty and sensitivity analysis is performed for the maximum absolute response and index dependent where the uncertainty and sensitivity analysis is performed at each time step, and iv) RESTING MATLAB code is developed to automate the model generation process and, then, propagate the thermal-hydraulic uncertainty. The input uncertainty information is found in related literature or, if not found, defined based on expert judgment. This paper, first, presents the Gesellschaft für Anlagen und Reaktorsicherheit methodology to propagate the uncertainty in thermal-hydraulic macroscopic parameters and, then, shows the results when the methodology is applied to a PWR reactor.

On-orbit test simulation for field angle dependent response measurement of the Amon-Ra energy channel instrument

  • 성세현;김석환;류동옥;홍진석
    • 천문학회보
    • /
    • 제37권2호
    • /
    • pp.211.1-211.1
    • /
    • 2012
  • The on-orbit test simulation for predicting the instrument directional responsivity was conducted by the Monte Carlo based integrated ray tracing (IRT) computation technique and analytic flux-to-signal conversion algorithms. For the on-orbit test simulation, the Sun model consists of the Lambertian scattering sphere and emitting spheroid rays, the Amon-Ra instrument is a two-channel including a broadband scanning radiometer (energy channel) and an imager with ${\pm}2^{\circ}$ FOV (visible channel). The solar radiation produced by the Sun model is directed to the instrument viewing port and traced through the dual channel optical train. The instrument model is rotated on its rotation axis and this gives a slow scan of the Sun model over the full field of view. The direction of the incident lights are fed with scanned images obtained from the visible channel instrument. The instrument responsivity was computed by the ratio of the incident radiation input to the instrument output. In the radiometric simulation, especially, measured BRDF of the 3D CPC was used for scattering effects on radiometry. With diamond turned 3D CPC inner surface, the anisotropic surface scattering model from the measured data was applied to ray tracing computation. The technical details of the on-orbit test simulation are presented together with field-of-view calibration plan.

  • PDF

다중모드 VCSEL의 모드 특성과 동특성 사이의 관계 (Relationship between Transverse-Mode Behavior and Dynamic Characteristics in Multi-Mode VCSELs)

  • 김봉석;김상배
    • 대한전자공학회논문지SD
    • /
    • 제42권12호
    • /
    • pp.19-26
    • /
    • 2005
  • 모드별 광출력-전류-전압 특성, RIN (relative intensity noise) 스펙트럼, 계단 전류입력에 대한 과도응답의 측정을 통하여 다중 횡모드 VCSEL의 모드 거동과 동특성 사이의 관계에 대하여 살펴보았다. RIN 스펙트럼의 공진 주파수는 모드별 광출력 특성 곡선으로 잘 설명할 수 있었다. 그리고, 활성영역이 넓은 VCSEL은 각각의 횡모드가 문턱전류가 서로 다른 독립적인 레이저로 동작하여 turn-on 지연시간이 달라 다단계 turn-on 특성을 보인다. 고차 모드가 발진하면서 이렇게 펄스의 파형이 찌그러지고 상승시간이 급격히 증가하기 때문에 단일 모드로 동작하도록 전류입력을 조절하지 않으면 고속 광통신용 광원으로서는 적합하지 않게 된다.

스테인리스강 STS 316L과 탄소강 A516-70의 이종금속 GTA 용접부 특성에 대한 연구 (A Study of Characteristics on the Dissimilar Metals (STS 316L - Carbon Steel: ASTM A516-70) Welds made with GTAW)

  • 김세철;신태우;문인준;장복수;고진현
    • Journal of Welding and Joining
    • /
    • 제33권4호
    • /
    • pp.37-43
    • /
    • 2015
  • Characteristics of dissimilar metal welds between STS 316L and carbon steel ASTM A516 Gr.70 made with GTAW have been evaluated in terms of microstructure, ferrite content, chemical analysis, hardness and corrosion resistance. Three heat inputs of 9.00, 11.25, 13.00kJ/cm were employed to make joints of dissimilar metals with ER309 wire. Based on microstructural examination, the amount of vermicular type of ${\delta}$-ferrite was increased with increasing heat input due to the increase of Creq/Nieq in the second layer of welds. Based on the EDX analysis of weld metals, Cr and Ni content in the 2nd layer increased while those content in the first layer of welds decreased with heat inputs. Cellular solidification mode in the 1st layer and dendritic solidification mode in the 2nd layer due to different cooling rates were prevailed, respectively. Heat affected zone which formed hard microstructure showed higher hardness than the weld metal. The salt spray test of dissimilar metals weld joints showed that the carbon steel surfaces only corroded. The weight loss rate due to corrosion increased up to 100hours but it decreased above 100 hours. There was little difference in the weight loss caused by corrosion regardless of heat inputs.

Post PC의 속성별 소비자 선호 분석 : 조건부 순위결정법을 이용하여 (Consumers' preference about the attributes of Post PC: reaults of a contingent ranking study)

  • 이주석;유승훈;곽승준
    • 기술혁신학회지
    • /
    • 제8권1호
    • /
    • pp.135-153
    • /
    • 2005
  • With an explosive growth of internet and a change of consumer's demand, Post PC is emerging as a substitute for the existing desktop computer and laptop computer. Post PC is a new computer which is portable with wireless networking, cheaper than the existing PCs and specialized in the specific function that consumers want. Furthermore, the shape and the ability of Post PC are dependent on its specific function. The rudimentary Post PCs such as PDA, web-pad and smart-phone are already usable. And in the future, owing to the progress of technologies, the heterogeneity of relate companies and the low entry barrier, various Post PCs will be developed. In this paper, we analyze consumers' willingness-to-pay for Post PC with the attributes such as the portability, the speed of CPU, the data input method (using key board, or notepad etc), the size of monitor and price. To estimating consumers' willingness-to-pay for the attributes of Post PC, we apply a contingent ranking method, which makes the respondents rank hypothetical Post the portability, the speed of CPU, the data input method (using key board, or notepad etc),the size of monitor and price. To estimating consumers' willingness-to-pay for the attributes of Post PC, we apply a contingent ranking method, which makes the respondents rank hypothetical Post PC alternatives featuring various combinations of attributes, to a survey data collected in Korea. Using the estimated willingness-to-pay, we predict the shape and the ability of future's Post PC and draw policy implications for the national and company level R&D strategies.

  • PDF

쥐가오리 모방 진동식 조류 터빈의 출력향상에 대한 실험적 연구 (Experimental Study on Power Improvement of a Flapping Tidal Stream Turbine by Mimicking a Manta-Ray)

  • 고진환;김지훈
    • Ocean and Polar Research
    • /
    • 제39권4호
    • /
    • pp.293-300
    • /
    • 2017
  • Various approaches have been tried in an effort to improve the power performance of a flapping tidal stream turbine after it was introduced as an alternative to conventional rotary turbines. Among the different approaches, researches on mimicking the morphology and behavior of animals have been conducted. In this study, we utilized a flapper to mimic the multi-joint pectoral fin of a Manta-ray and investigated its effect on power generation. Experiments were conducted by a dual flapping apparatus with rigid and flexible flappers in a towing tank facility. First, in order to determine the conditions that can produce high power generation, the performances of the dual rigid flappers were compared when input arm angles and frequencies are changed, and the two conditions $40^{\circ}$, 0.2 Hz and $40^{\circ}$, 0.3 Hz for the input arm angle, frequency were selected. When the mimicked flexible flapper was used instead of the front rigid flapper and the rear one, the power was improved by an average of 22% and 38% in the experimental conditions, respectively. Moreover, it was recognized from the apparent camber observed during the experiment that the flexible flapper had been successfully applied. If the feasibility of the Manta-Ray mimicked flapper is improved through subsequent researches, the flapping tidal turbine can be a viable alternative to rotary turbines in the near future.