• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.869-872
• /
• 2005

This research studied robust design of column part for LCD transfer system. $1^{st}$ DOE(Design of Experiment)was conducted to find out main effect factors. 36 experiments were performed and their results were shows that the geometric parameters(Low-length, Side-length, Upper-thickness, Middle-thickness)are more important than other factors. The main effect plots shows that the maximum deflection of column is minimized with increasing Low-length, Side-length, under-thickness and Middle-thickness. $2^{nd}$ DOE was conducted to obtain RMS(Response Surface Method)equation 25 experiments were conducted. The CCD(Central Composite Design)technique with four factors were used. The coefficient of determination $(R^2)$ for the calculated RSM equation was 0.986. Optimum design was conducted using the RSM equation Multi-island genetic algorithm was used to optimum design. Optimum value for Low-length. Side-length, Upper-thickness and Middle-thickness were 299.8mm, 180.3mm, 21.7mm, 21.9mm respectively. An approximate value of 5.054mm in deflection was expected to be a maximum under the optimum conditions. Six sigma robust design was conducted to find out guideline for control range of design parameter. To acquire six sigma level reliability, the standard deviation of design parameter should be controlled within 2% of average design value.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.7 no.4
• /
• pp.425-433
• /
• 1983

Fatigue tests by axial loading (R=0.1) were carried out to investigate fatigue crack growth properties of small surface cracks in mild steel at room temperature, 250.deg. C and 400.deg. C, by using flat specimens with a small artificial pit. All the data of the fatigue crack growth rate obtained in the present tests are determined as a function of the stress intensity factor range, so that the applicability of liner fracture mechanics to the fatigue crack growth of surface cracks at elevated temperatures is investigated and discussed in comparison with the data of type 304 stainless steel at room temperature and elevated temperature. The obtained results are as follows: 1) Relations of both surface fatigue crack length and its depth to cycle ratio fall within a narrow scatter band in spite of different stress levels. 2) The .DELTA. .sigma. .root. .pi. a-da/dN relation of surface fatigue crack growth at room temperature is independent of the stress level and can be plotted as a straight line at log-log diagram, but the relation at 400.deg. C depends partly on the stress level. 3) Relations of the fatigue crack growth into depth d(2b)/dN and is stress intensity factor range .DELTA. $K_{I}$, accounted for the aspect ratio variation, fall within a narrow scatter band for wide range of the applied stress levels. And .DELTA. $K_{I}$E-d(2b)/dN relations of mild steel at different stress level coincide relatively well with the data of type 304 stainless steel. 4) The value of aspect ratio obtained by a beach mark method and a temper coloring method approaches about 0.9 in common with crack growth and it is independent of stress level and temperatures. 5) The equi-crack length curve is parallel to S-N$_{f}$ curve at elevated temperatures.s.s.s.

• Korean Journal of Environmental Agriculture
• /
• v.24 no.4
• /
• pp.326-333
• /
• 2005

To enhance groundwater quality and soil nutrient management in fertigated plastic film house, groundwater samples from Jinju 52, Sacheon 3, Changnyeong 3, Sancheong 4 and Namhae 2 sites and soil samples from Jinju 23 sites were collected from September to November in 2004. The average concentration of $NO_3-N$ in groundwater was $12.0mg{\ell}^{-1}$ and 20% of survey sites exceeded the limiting level $(20mg{\ell}^{-1})$ of agricultural goundwater quality. The amount of ions in groundwater was in the order of $Ca^{2+}>Na^+>Mg^{2+}>NH_4-N>K^+$ in cations and ${HCO_3}^->{SO_4}^{2-}>NO_3-N>Cl^-$ in anions. Electrical conductivity of groundwater was positively correlated with $Ca^{2+},\;Cl^-,\;Mg^{2+},\;{SO_4}^{2-},\;NO_3-N\;and\;Na^+$ concentrations. In addition, it had significantly positive correlation with sum cations and anions, respectively $({\Sigma}cations\;(me{\ell}^{-1})$ = EC values $(dS\;m^{-1}){\times}4.65,\;{\Sigma}anions\;(me{\ell}^{-1})$ = EC values $(dS\;m^{-1}){\times}7.63\;and\;{\Sigma}\;(cations+anions,\;me{\ell}^{-1})$ = EC values $(dS\;m^{-1}){\times}11.1)$. The proportions of soil chemical properties over the critical levels for crop production in fertigated plastic film house were 56.5% in pH, 47.8% in OM, 95.7% in available $P_2O_5$, 78.3% in exchangeable K, 87% in exchangeable Ca, 56.5% in exchangeable Mg and 43.5% in EC. Soil pH was positively correlated with pH $(r=0.540^{**})$ and ${HCO_3}^-$ concentration $(r=0.523^{**})$ of groundwater.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.5
• /
• pp.145-151
• /
• 2012

New design of catalytic converter is proposed by optimization of DFSS (Design For Six Sigma) and DOE (Design Of Experiment) method which is based on taguchi matrix. As a result of the optimization of design of catalytic converter, this paper classifies Exhaust-downpipe shapes with 3 parameters to increase flow velocity uniformity of front catalytic substrate face from CFD results. after finishing with L9 Taguchi test matrix, it can be found the main effect of each design parameter of concept model, and optimal design level. in conclusion, it can be increase flow uniformity from 0.60 upto 0.80 with optimal diffuser shape for Turbo-charger.

• Journal of Korea Technology Innovation Society
• /
• v.17 no.4
• /
• pp.733-762
• /
• 2014

The government mandates that national research facilities & equipments through R&D business budget should be registered on the National Science and Technology Information Service (NTIS) for the purpose of the efficient use of the research facilities & equipments. This study is to contribute to the national policies on the efficient management of the research facilities & equipments by recognition methodology with the university's members and analysis of the impact factors of the universities' registration process improvement through the Define level and Measure level of the Six Sigma DAMIC. The survey and interview were conducted on research directors, professors joining university administration, graduate students, researchers, and staffs of A University. The findings are the lack of understanding specific steps and life-cycle management of research facilities & equipments. It is necessary to collect suggestions from universities and pursue policies considered the unique characteristics of the university for advanced operating and maximizing use of university's national research facilities & equipments. Research facilities & equipments enrollment compliance rate and registration accuracy were selected as CTQ-Y through the Six Sigma. 72 potential cause variables were derived through Process Map and C & E Diagram. 13 variables were determined as core potential factors through the X-Y Matrix and Pareto Chart. Research institutions should maximize utilization of research facilities & equipments through deriving a potential variables of the process improvements and designing a detail improvements based on the characteristics of each institutions.

• Journal of Life Science
• /
• v.22 no.3
• /
• pp.332-339
• /
• 2012

Horizontal distributions and their ecotoxicological implications relating to organochlorine compounds (OCs) were determined in surface sediments sampled from the West Nakdong River. The concentrations of polychlorinated biphenyls (PCBs), dichlorodiphenyltrichloroethanes (DDTs), hexachlorocyclohexanes (HCHs), and hexachlorobenzene (HCB) in surface sediments were in the range of 0.57-3.68, 0.41-8.35, 0.63-1.65, and n.d.-0.56 ng/g, respectively. DDTs represent the major OC in the West Nakdong River. Concentrations of PCBs and DDTs correlate with the total organic carbon (PCBs: r=0.874, p<0.001, and DDTs: r=0.762, p<0.05, respectively), indicating that organic content in the sediments is one of the major factors for influencing horizontal distribution of the organochlorine compounds in this river. Examining the potential poisonous character of the surface sediments to benthic organisms according to the sediment quality guideline (SQG), set out by the Canadian Council of Ministers of the Environment (CCME) and the National Oceanic and Atmospheric Administration (NOAA), we found that the concentrations of total PCBs, p,p'-DDD, and ${\gamma}$-HCH were lower than the effects range-low (ER-L) and the probable effects level (PEL). As a result, it is considered that the effect of organochlorines in the region considered on benthic organisms is very low from the perspective of environmental toxicology. However, in terms of the Canadian SQC, p,p'-DDE, p,p'-DDT, and total DDTs, respectively, exceeded the interim sediment quality guidelines (ISQG) and the threshold effect level (TEL) in 30%, 17%, and 19%, respectively, of the sediment samples analyzed.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2182-2186
• /
• 2003

This paper presents the differential type resonant accelerometer (DRXL) and its performance test results. The DRXL is the INS grade, surface micro-machined sensor. The proposed DRXL device produces a differential digital output upon an applied acceleration, and the principle is a gap-dependent electrical stiffness variation of the electrostatic resonator with torsion beam structures. Using this new operating concept, we designed, fabricated and tested the proposed device. The final device was fabricated by using the wafer level vacuum packaging process. To test the performance of the DRXL, a nonlinear self-oscillation loop is designed using describing function technique. The oscillation loop is implemented using discrete electronic elements. The performance test of the DRXL shows that the sensitivity of the accelerometer is 12 Hz/g and its long term bias stability is about $2mg(1{\sigma})$. The turn on repeatability, bandwidth, and dynamic range are 4.38 mg, 100 Hz, and ${\pm}\;70g$, respectively.

• Geophysics and Geophysical Exploration
• /
• v.19 no.1
• /
• pp.1-10
• /
• 2016

The hypocenter distribution of microseismic events generated by hydraulic fracturing for shale gas development provides essential information for understanding characteristics of fracture network. In this study, we evaluate how inaccurate velocity models influence the inversion results of two widely used location programs, hypoellipse and hypoDD, which are developed based on an iterative linear inversion. We assume that 98 stations are densely located inside the circle with a radius of 4 km and 5 artificial hypocenter sets (S0 ~ S4) are located from the center of the network to the south with 1 km interval. Each hypocenter set contains 25 events placed on the plane. To quantify accuracies of the inversion results, we defined 6 parameters: difference between average hypocenters of assumed and inverted locations, $d_1$; ratio of assumed and inverted areas estimated by hypocenters, r; difference between dip of the reference plane and the best fitting plane for determined hypocenters, ${\theta}$; difference between strike of the reference plane and the best fitting plane for determined hypocenters, ${\phi}$; root-mean-square distance between hypocenters and the best fitting plane, $d_2$; root-mean-square error in horizontal direction on the best fitting plane, $d_3$. Synthetic travel times are calculated for the reference model having 1D layered structure and the inaccurate velocity model for the inversion is constructed by using normal distribution with standard deviations of 0.1, 0.2, and 0.3 km/s, respectively, with respect to the reference model. The parameters $d_1$, r, ${\theta}$, and $d_2$ show positive correlation with the level of velocity perturbations, but the others are not sensitive to the perturbations except S4, which is located at the outer boundary of the network. In cases of S0, S1, S2, and S3, hypoellipse and hypoDD provide similar results for $d_1$. However, for other parameters, hypoDD shows much better results and errors of locations can be reduced by about several meters regardless of the level of perturbations. In light of the purpose to understand the characteristics of hydraulic fracturing, $1{\sigma}$ error of velocity structure should be under 0.2 km/s in hypoellipse and 0.3 km/s in hypoDD.

• Archives of design research
• /
• v.18 no.4 s.62
• /
• pp.95-104
• /
• 2005

The purpose of this study is to estimate the determinants of product design and analyze the impacts of product design on quality competitiveness, product reliability, and consumer satisfaction in an attempt to provide a foundation for the theory of design management. For this empirical analysis, this study has derived the relevant measurement variables from a survey on 400 Korean manufacturing firms during the period of $August{\sim}October$ 2003. The empirical findings are summarized as follows: First, the determinants of product design are very significantly (at p<0.001) estimated to be the R&D capability, the level of R&D expenditure, the level of innovative activities(5S, TQM, 6Sigma, QC, etc.). This empirical result can support Pawar and Driva(1999)'s two principles by which the performance of product design and product development can be simultaneously evaluated in the context of CE(concurrent engineering) of NPD(newly product development) activities. Second, the hypothesis on the causality: product design${\rightarrow}$quality competitiveness${\rightarrow}$customer satisfaction${\rightarrow}$customer loyalty is very significantly (at p<0.001) accepted. This implies that product design positively affects consumer satisfaction, not directly but indirectly, by influencing quality competitiveness. This empirical result of this study can also support the studies of for example Flynn et al.(1994), Ahire et at.(1996), Afire and Dreyfus(2000) which conclude that design management is a significant determinant of product quality. The aforementioned empirical results are important in the following sense: the empirical result that quality competitiveness plays a bridging role between product design and consumer satisfaction can reconcile the traditional debate between QFD(quality function development) approach asserted by product developers and conjoint analysis maintained by marketers. The first empirical result is related to QFD approach whereas the second empirical result is related to conjoint analysis. At the same time, the empirical results of this study can support the rationale of design integration(DI) of Ettlie(1997), i.e., the coordination of the timing and substance of product development activities performed by the various disciplines and organizational functions of a product's life cycle. Finally, the policy implication (at the corporate level) from the empirical results is that successful design management(DM) requires not only the support of top management but also the removal of communication barriers, (i.e. the adoption of cross-functional teams) so that concurrent engineering(CE), the simultaneous development of product and process designs can assure product development speed, design quality, and market success.

• Journal of fish pathology
• /
• v.36 no.2
• /
• pp.263-275
• /
• 2023

Chum salmon (Oncorhynchus keta) is a species which returns to Korea for spawning and was produced as seed production at the Fisheries Resources Agency located in Uljin-gun, Gyeongsangbuk-do to preserve the species. However, farmed chum salmon showed symptoms of bacterial infection. Therefore, in this study, bacteria were isolated to identify the causative agent from chum salmon in October 2021. The isolated bacteria were identified based on the sequences of 16S rDNA, rpoD (RNA polymerase sigma factor σ⁷⁰), and vapA (A-layer) genes. Also, salinity-growth curve, biochemical characterization, antibiotic susceptibility test, and pathogenicity analysis were performed in four strains. As a result, four isolated strains were identified as Aeromonas salmonicida subsp. salmonicida. Additionally, the bacterial strains showed a decrease in growth as the salt concentration increased in the medium. All of the isolated strains exhibited γ-hemolysis, and the same biochemical properties. In the antimicrobial susceptibility test, all strains showed an inhibition zone of 40 to 44 mm for oxolinic acid, flumequine, and florfenicol. Pathogenic factors were assessed by RT-PCR at the mRNA level, and found that the four strains expresses the outer membrane ring of T3SS (ascV), inner membrane ring of T3SS (ascC), vapA, enterotoxin (act), and lipase (lip) genes which are well known to significantly contribute to the pathogenicity of A. salmonicida. The results of this study can be used as basic data to prevent A. salmonicida subsp. salmonicida occurring in sea-chum salmon in the future.