• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.1074-1076
• /
• 1992

By using nonlinear loads in power line, reactive power and harmonics are occured. In this thesis, on the basis of the instantaneous reactive power theory, the calculation method of compensation current commands and the current control characteristics of active power filter using voltage source PWM converter are presented. The calculation of compensation current is performed by DSP within 50 usec. And the Pl control of current is performed by analog devices. The compensations of harmonic current in rectifier loads and unbalance currents are proved by experiments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.1035-1037
• /
• 1992

Generally, fuel cell has characteristics of low voltage, large current and voltage variation under load change. Therefore, DC output voltage of fuel cell is too low to convert into AC with high efficiency and good performance. For this reason, fuel cell generating system is composed of DC-DC converter and inverter in cascade. This paper used 2-phase boost DC-DC converter to obtain low distortion waveform and reduce input-output current ripple, and discussed inverter which can be operated in independent drive mode and utility line interface drive mode. Then, the change of modes can be achived smoothly.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 2006년도 하계종합학술발표회 논문 초록집
• /
• pp.632-632
• /
• 2006

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1081-1084
• /
• 2007

System on Panel (SOP) can integrate many functions by Thin Film Transistor (TFT) circuits on an insulator substrate without using external driver LSIs. However, to make practical SOP has become more and more difficult because of rapid cost reduction of the driver LSIs. This paper will review the circuit design technology trend for SOP and introduce an example of a practical SOP, 2.0inch QVGA full color active matrix OLED with 8bit source driver.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 B
• /
• pp.540-542
• /
• 1999

We propose the digital range tracking algorithm for a tracking radar. The proposed digital range tracker are designed and implemented. Simulation results are presented for demonstrating the performance of the proposed range tracker. According to our field test results, the implemented digital range tracker performs well even in the real environments.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.401-404
• /
• 2002

We have studied on response time of the fringe-field switching (FFS) TFT-LCD using the LCs with negative dielectric anisotropy related to rubbing angle. Simulation and experimental results shows that when a rubbing angle approached $45^{\circ}$, a slope of voltage-dependent curve is decreased such that the operation voltage is increased, however the whole response characteristic between inter-gray levels have a trend to be fast.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 B
• /
• pp.1063-1065
• /
• 1996

As PLC has become central to today's FA environment, the importance of developing and providing special-module of PLC such as Analog-module, PID-module, Temperature Control-module has increased. In this paper introduces the Temperature Control-module which is developed by LGIS R&D lab. and presents the availability of PLC-control system with Temperature Control-module.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.794-798
• /
• 1992

We present an optical Voltage and current sensor using $BSO(Bi_{12}SiO_{20})$ monocrystal. The voltage and current sensor consist of PBS(Polarizing Beam Splitter), 1/4 wavelength plate, ZnSe, Selfoc lens, LED, and PIN-PD etc. Magnetic core was made using permalloy for applying magnetic field to current sensor effectively. Current was measured from 100 to 1,600 ampere and accuracy was about ${\pm}$5%. The accuracy could be improved to ${\pm}$l% after reducing the nonlinear property of BSO crystal using our own program in PC (IBM286). We noticed that these data were not influenced by 154,000 voltage at all. Applied voltage was reduced to 1/20 using capacitors. And experiment was carried out up to 450V of the reduced voltage. The data fran optical voltage sensor was similar to that from conventional voltage sensor. The accuracy of the data was within about ${\pm}$1%.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.253-253
• /
• 2008

Recently, high performance microelectronic devices are designed in multi-layer structure in order to make dense wiring of metal conductors in compact size. For making dense wiring of metal conductors, we investigated CTE and peel strength of dielectric materials for next generation PCB. It is an object of this research to develop an epoxy resin composition for an interlayer insulating material exhibiting low CTE and high peel strengnth and making an insulating layer thinner.

• 한국군사과학기술학회지
• /
• 제20권6호
• /
• pp.813-821
• /
• 2017

This paper presents the study result on a realization of wireless umbilical device for missile systems. In general, a missile system is connected to a fire control equipment via an umbilical connector to get the electrical power for its internal equipment and communicate with each other. And these connectors inherently have many problems of mis-contact between pin and socket, and mis-separation during missile firing, etc. A wireless umbilical device using LC resonance is devised to solve these problems of the current technology. For hundreds of watts power transmission under the missile system environment of restricted space, we designed and made a prototype of wireless umbilical device. And we tested this wireless umbilical device with an aluminum cylinder having cutout windows which simulate missiles. We realized that the wireless technology can be used as a substitute for the conventional umbilical connectors, and EMI and environment tests should be followed further.