• 제목/요약/키워드: R&D Department

검색결과 9,783건 처리시간 0.054초

운동훈련(運動訓練)에 대(對)한 심폐기능(心肺機能)의 적응(適應)에 관(關)한 연구(硏究) (Cardio-pulmonary Adaptation to Physical Training)

  • 조강하
    • The Korean Journal of Physiology
    • /
    • 제1권1호
    • /
    • pp.103-120
    • /
    • 1967
  • As pointed out by many previous investigators, the cardio-pulmonary system of well trained athletes is so adapted that they can perform a given physical exercise more efficiently as compared to non-trained persons. However, the time course of the development of these cardio-pulmonary adaptations has not been extensively studied in the past. Although the development of these training effects is undoubtedly related to the magnitude of an exercise load which is repeatedly given, it would be practical if one could maintain a good physical fitness with a minimal daily exercise. Hence, the present investigation was undertaken to study the time course of the development of cardio-pulmonary adaptations while a group of non-athletes was subjected to a daily 6 to 10 minutes running exercise for a period of 4 weeks. Six healthy male medical students (22 to 24 years old) were randomly selected as experimental subjects, and were equally divided into two groups (A and B). Both groups were subjected to the same daily running exercise (approximately 1,000 kg-m). 6 days a week for 4 weeks, but the rate of exercise was such that the group A ran on treadmill with 8.6% grade for 10 min daily at a speed of 127 m/min while the group B ran for 6 min at a speed of 200 m/min. In order to assess the effects of these physical trainings on the cardio-pulmonary system, the minute volume, the $O_2$ consumption, the $CO_2$ output and the heart rate were determined weekly while the subject was engaged in a given running exercise on treadmill (8.6% grade and 127 m/min) for a period of 5 min. In addition, the arterial blood pressure, the cardiac output, the acid-base state of arterial blood and the gas composition of arterial blood were also determined every other week in 4 subjects (2 from each group) while they were engaged in exercise on a bicycle ergometer at a rate of approximately 900 kg m/min until exhaustion. The maximal work capacity was also determined by asking the subject to engage in exercise on treadmill and ergometer until exhaustion. For the measurement of minute volume, the expired gas was collected in a Douglas bag. The $O_2$ consumption and the $CO_2$ output were subsequently computed by analysing the expired gas with a Scholander micro gas analyzer. The heart rate was calculated from the R-R interval of ECG tracings recorded by an Offner RS Dynograph. A 19 gauge Cournand needle was inserted into a brachial artery, through which arterial blood samples were taken. A Statham $P_{23}AA$ pressure transducer and a PR-7 Research Recorder were used for recording instantaneous arterial pressure. The cardiac output was measured by indicator (Cardiogreen) dilution method. The results may be summarized as follows: (1) The maximal running time on treadmill increased linearly during the 4 week training period at the end of which it increased by 2.8 to 4.6 times. In general, an increase in the maximal running time was greater when the speed was fixed at a level at which the subject was trained. The mammal exercise time on bicycle ergometer also increased linearly during the training period. (2) In carrying out a given running exercise on treadmill (8.6%grade, 127 m/min), the following changes in cardio·pulmonary functions were observed during the training period: (a) The minute volume as well as the $O_2$ consumption during steady state exercise tended to decrease progressively and showed significant reductions after 3 weeks of training. (b) The $CO_2$ production during steady state exercise showed a significant reduction within 1 week of training. (c) The heart rate during steady state exercise tended to decrease progressively and showed a significant reduction after 2 weeks of training. The reduction of heart rate following a given exercise tended to become faster by training and showed a significant change after 3 weeks. Although the resting heart rate also tended to decrease by training, no significant change was observed. (3) In rallying out a given exercise (900 kg-m/min) on a bicycle ergometer, the following change in cardio-vascular functions were observed during the training period: (3) The systolic blood pressure during steady state exercise was not affected while the diastolic blood Pressure was significantly lowered after 4 weeks of training. The resting diastolic pressure was also significantly lowered by the end of 4 weeks. (b) The cardiac output and the stroke volume during steady state exercise increased maximally within 2 weeks of training. However, the resting cardiac output was not altered while the resting stroke volume tended to increase somewhat by training. (c) The total peripheral resistance during steady state exercise was greatly lowered within 2 weeks of training. The mean circulation time during exorcise was also considerably shortened while the left heart work output during exercise increased significantly within 2 weeks. However, these functions_at rest were not altered by training. (d) Although both pH, $P_{co2}\;and\;(HCO_3-)$ of arterial plasma decreased during exercise, the magnitude of reductions became less by training. On the other hand, the $O_2$ content of arterial blood decreased during exercise before training while it tended to increase slightly after training. There was no significant alteration in these values at rest. These results indicate that cardio-pulmonary adaptations to physical training can be acquired by subjecting non-athletes to brief daily exercise routine for certain period of time. Although the time of appearance of various adaptive phenomena is not identical, it may be stated that one has to engage in daily exercise routine for at least 2 weeks for the development of significant adaptive changes.

  • PDF

대구 안심연료단지 환경오염물질 노출 평가(II) - TSP, PM10, PM2.5 및 중금속 농도분포 및 노출특성 - (Exposure Assessments of Environmental Contaminants in Ansim Briquette Fuel Complex, Daegu(II) - Concentration distribution and exposure characteristics of TSP, PM10, PM2.5, and heavy metals -)

  • 정종현;피영규;이준정;오인보;손병현;이형돈;윤미라;김근배;유승도;민영선;이관;임현술
    • 한국산업보건학회지
    • /
    • 제25권3호
    • /
    • pp.380-391
    • /
    • 2015
  • Objectives: The objective of this study is to assess airborne particulate matter pollution and its effect on health of residents living near Ansim Briquette Fuel Complex and its vicinities. Also, this study measured and analyzed the concentration of TSP, $PM_{10}$, $PM_{2.5}$, and heavy metals which influences on the environmental and respiratory disease in Ansim Briquette Fuel Complex, Daegu, Korea. Methods: In this study, we analyzed various environmental pollutants such as particulate matter and heavy metals from Ansim Briquette Fuel Complex that adversely affected local residents's health. In particular, we verified the concentration distribution and characteristics of exposure for TSP, $PM_{10}$, and $PM_{2.5}$ among particulate matters, and heavy metals(Cd, Cr, Cu, Mn, Ni, Pb, Fe, Zn, and Mg). In that regard, the official test method on air pollution in Korea for analysis of particulate matter and heavy metal in atmosphere were conducted. The large capacity air sampling method by the official test method on air pollution in Korea were applied for sampling of heavy metals in atmosphere. In addition, we evaluated the concentration of seasonal environmental pollutants for each point of residence in Ansim Briquette Fuel Complex and surrounding area. The sampling measured periods for air pollutants were from August 11, 2013 to February 21, 2014. Furthermore, we measured and analyzed the seasonal concentrations(summer, autumn and winter). Results: The average concentration for TSP, $PM_{10}$, and $PM_{2.5}$ by direct influence area at Ansim Briquette Fuel Complex were 1.7, 1.4 and 1.9 times higher than reference region. In analysis results of seasonal concentrations for particulate matter in four direct influence and reference area, concentration levels for winter were generally somewhat higher than concentrations for summer and autumn. The average concentrations for Cd, Cr, Mn, Ni, Pb, Fe, and Zn in direct influence area at Ansim Briquette Fuel Complex were $0.0008{\pm}0.0004{\mu}g/Sm^3$, $0.0141{\pm}0.0163{\mu}g/Sm^3$, $0.0248{\pm}0.0059{\mu}g/Sm^3$, $0.0026{\pm}0.0011{\mu}g/Sm^3$, $0.0272{\pm}0.0084{\mu}g/Sm^3$, $0.4855{\pm}0.1862{\mu}g/Sm^3$, and $0.3068{\pm}0.0631{\mu}g/Sm^3$, respectively. In particularly, the average concentrations for Cd, Cr, Mn, Ni, Pb, Fe, and Zn in direct influence area at Ansim Briquette Fuel Complex were 1.9, 3.6, 2.1, 1.9, 1.4, 2.6, and 1.2 times higher than reference area, respectively. The continuous monitoring and management were required for some heavy metals such as Cr and Ni. Moreover, the average concentration in winter for particulate matter in direct influence area at Ansim Briquette Fuel Complex were generally higher than concentrations in summer and autumn. Also, average concentrations for TSP, $PM_{10}$, and $PM_{2.5}$ were from 1.5 to 2.0 times, 1.2 to 1.8 times, and 1.1 to 2.3 times higher than reference area, respectively. In results for seasonal atmospheric environment, TSP, $PM_{10}$, $PM_{2.5}$, and heavy metal concentrations in direct influence area were higher than reference area. Especially, the concentrations in C station were a high level in comparison with other area. Conclusions: In the results, some particulate matters and heavy metals were relatively high concentration, in order to understand the environmental pollution level and health effect in surrounding area at Ansim Briquette Fuel Complex. The concentration of some heavy metals emitted from direct influence area at Ansim Briquette Fuel Complex were relatively higher than reference area. In particular, average concentration for heavy metals in this study were higher than average concentrations in air quality monitoring station for heavy metal for 7 years in Deagu metropolitan region. Especially, the residents near Ansim Briquette Fuel Complex may be exposed to the pollutants(TSP, $PM_{10}$, $PM_{2.5}$, and heavy metals, etc) emitted from the factories in Ansim Briquette Fuel Complex.

Alcohol 사료가 In vitro 반추위내 pH, Ammonia, Alcohol 및 Volatile Fatty Acids 농도에 미치는 영향 (Effects of Alcoholic Feeds on In vitro Ruminal pH, Ammonia, Alcohol and Volatile Fatty Acids Concentrations)

  • 신종서;박병기
    • Journal of Animal Science and Technology
    • /
    • 제48권1호
    • /
    • pp.91-100
    • /
    • 2006
  • 본 실험은 alcohol 사료 처리에 따른 in vitro 발효 pattern의 변화를 검토하여 alcohol 사료 처리가 반추위내 발효 pattern에 미치는 영향을 규명코자 실시하였다. 시험구 처리는 배합사료를 첨가하는 대조구(control), 배합사료와 1, 3 및 5%의 alcohol 사료(Alcoholic feed; AF)를 첨가하는 처리구를 각각 AF-1구, AF-3구 및 AF-5구로 나누어 실시하였다. 배양 12시간 동안 ammonia 농도는 AF-1, AF-5구에서 대조구에 비해 낮았다(p<0.05). 배양액의 alcohol 농도는 alcohol 첨가 수준이 증가할수록 높았다(p<0.05). 배양 12시간에 TVFA 농도는 AF-1, AF-3 및 AF-5에서 대조구에 비해 현저히 높았다(p<0.05). 배양 8~12시간 사이에 acetate 비율은 대조구에서 빠른 속도로 감소하였으며, AF-1, AF-3 및 AF-5구에서는 일정한 수준을 유지하는 것으로 나타났다. Propionate 비율은 배양 8~12시간 사이에 AF-1, AF-3 및 AF-5에 비해 대조구에서 빠른 속도로 증가하였다(p<0.05). Butyrate 및 valerate 비율은 AF-1, AF-3 및 AF-5에서 대조구에 비해 높았다(p<0.05). Caproate 비율은 배양 8시간에 AF-1구, AF-3구 및 AF-5구에서 각각 0.05, 0.58 및 0.47M%로 나타났으나, 대조구에서는 검출되지 않았다. 본 실험의 결과에서 alcohol 사료의 처리는 in vitro 반추위액의 ammonia, alcohol 및 휘발성지방산 농도와 pH에 긍정적인 영향을 미치는 것으로 판단된다. 또한 본 실험의 결과에서는 5%의 alcohol 첨가 수준이 여타 alcohol 첨가 수준에 비해 반추위 발효에 보다 효과적인 것으로 사료된다.

농업해충에 대한 친환경유기농자재들의 살충력 및 섭식저해력 평가 (Evaluation of Insecticidal and Antifeeding Activities of Eco-friendly Organic Insecticides Against Agricultural Insect Pests)

  • 김유화;나영은;김민준;최병렬;조형찬;김순일
    • 한국응용곤충학회지
    • /
    • 제54권2호
    • /
    • pp.99-109
    • /
    • 2015
  • 충해 또는 병충해 관리용 친환경유기농자재로 목록공시된 제품 29종의 배추좀나방과 파밤나방 유충, 복숭아혹진딧물 성충, 꽃노랑총채벌레 성충에 대한 살충과 섭식저해활성을 분무법과 잎침지법을 이용하여 실내에서 평가하였다. 배추좀나방 유충에 대해 추천농도 분무 또는 잎침지시 유효성분으로 고삼 추출물 60% 단제(EOIS)와 고삼외 3종 식물 추출물(백부근, 멀구슬나무, 개박하, EIOSm) 및 고삼외 2종 식물추출물(EOISc)을 함유한 혼합제의 살충력이 우수했다. 하지만 반량 처리 시 그 활성은 50% 이하로 감소되었다. 파밤나방 유충에 대해서는 고삼 60%단제(EOIS)만이 우수한 살충력을 보였고, 비슷하게 꽃노랑총채벌레 성충에 대해 잎침지 후 24시간과 48시간 노출 시 85%와 95%의 살충력을 나타냈다. 복숭아혹진딧물 성충에 대한 분무시험에서 고삼 외 3종 혼합제(EOISm)와 유채외 2종 혼합제(EOIR)가 93%와 68% 살충력을 보였는데, 농도를 배량 증가시켜도 살충력은 크게 향상되지 않는 경향을 보였다. 추천농도 잎침지에서는 고삼외 3종 혼합제(EIOSm)만이 100%의 강한 접촉독성을 나타냈는데, 노출 시간과 농도를 증가시키면 시트로넬라오일외 1종(EOICi)과 유채외 2종 혼합제(EOIR)들의 살충력이 증가하였다.흥미롭게도 cedar oil 16%(EOICe), 고삼 60% 단제(EOIS), 고삼외 3종 혼합제(EIOSm), 고삼외 2종 혼합제(EOISc), 미생물 89.62%(EOIM), 유채외 2종 혼합제(EOIR), 식물추출물(EOIPe), 차나무추출물 48%(EOIT)제 등은 파밤나방에 대해 분무처리 시 강한 섭식저해활성을 나타냈다. 또한 배추좀나방 유충에 대해서도 이들 혼합제들 이외에 3종 미생물제들(EOIB, EOIM, EOIBs)과 시트로넬라오일외 1종(EOICi), 겨자외 2종(EOIMc) 등의 식물 추출물 혼합제들이 70% 이상의 섭식저해활성을 나타냈다. 이상의 결과, 대상 곤충 종 및 유효성분이나 처리량에 따라 살충력과 섭식저해력이 차이를 보였으나, 전체적으로 고삼추출물외 2-3종 식물추출물을 복합적으로 함유한 혼합제들의 유효력이 우수하게 나타남을 알 수 있었다.

그린기술 채택에의 디지털 지식풍부성의 역할: 디지털 옵션 이론 관점에서 (The Role of Digital Knowledge Richness in Green Technology Adoption: A Digital Option Theory Perspective)

  • 유호선;이남연;권오병
    • 한국정보시스템학회지:정보시스템연구
    • /
    • 제24권2호
    • /
    • pp.23-52
    • /
    • 2015
  • 연구 목적 본 연구의 목적은 그린 기술의 채택 현상을 디지털 지식의 제공 여부로 이해하는 것이다. UTAUT2를 이론적 기반으로 하되 디지털 옵션 이론과 결합하였다. 특히 일반적인 UTAUT2 관련 연구들이 IT자체에 대한 수용 현상을 설명하기 위해 사용된 것과는 달리 본 연구에서는 IT의 산물인 디지털지식이 그린 기술이라는 대상을 채택하는데 긍정적인 영향을 주는지에 대해서 초점을 두었다. 연구설계/방법론/접근법 UTAUT2를 근거로 하되 그린 기술의 채택 현상을 설명하는데 유용한 요인들을 파악하기 위하여 내용분석을 실시하였다. 그 결과로 본 연구에서는 그린기술을 위한 수정된 UTAUT2 모형을 개발하였으며 그에 맞는 36개의 설문 문항을 개발하였다. 각 문항의 측정은 리커트 7점 척도를 채택하였다. 한 기관의 패널 자료로부터 총402명의 유효한 설문을 획득하였다. 사전 검증을 마치고 획득한 설문결과를 PLS 2.0M3와 SPSS 20.0을 이용하여 분석하였으며 가설검증을 위해 구조방정식 분석을 수행하였다. 결과 통계분석 결과 개발된 UTAUT2 수정 모형은 수요자들의 그린기술 채택 현상을 적절히 설명하는 것으로 실증분석 결과 나타났다. 사회적 영향은 전통적인 UTAUT나 UTAUT2에서 사용하는 효용가치나 쾌락가치보다 그린기술의 채택하는 맥락 하에서의 수용 행위를 더 잘 설명하고 있었다. 또한 디지털 지식과 그린기술의 채택, 즉 환경 친화적 제품에 대한 태도에 영향을 주는 요인들 사이의 인과관계는 유의한 것으로 판정되었다. 아울러 디지털 지식은 어떤 잠재적 사용자들이 그린기술을 잘 활용하고 있는 그들의 동료들로부터 학습하기 위해서 유용한 매체인 것으로 밝혀졌다.

LC-MS/MS를 이용한 퇴비 및 액비 중 항생제 동시 분석법 개발 (Development of Simultaneous Analytical Method of Veterinary Antibiotics in Manure using Liquid Chromatography Coupled with Tandem Mass Spectrometry)

  • 정형석;이영준;이한솔;;;박병준;김장억;심재한
    • 한국환경농학회지
    • /
    • 제36권3호
    • /
    • pp.201-210
    • /
    • 2017
  • 전국의 퇴비 및 액비 시료에서 대상 항생제 종9 (ceftiofur, clopidol, florfenicol, sulfamethazine, sulfamethoxazole, sulfathiazole, tetracycline, tiamulin, tylosin)을 pH 6 McIlvaine buffer를 사용하여 아세트산 함유 아세토니트릴, $Na_2Cit.5H_2O$, $Na_3Cit.2H_2O$로 추출 후 $C_{18}$과 PSA로 정제하여 LC-MS/MS로 분석하는 모니터링을 수행하였다. 그 중 5종의 항생제 sulfamethazine, sulfathiazole, tylosin, tiamulin 및 clopidol이 국내 퇴액비 시료에서 검출되었으며 제안한 분석법은 퇴 액비 중 잔류 항생제 모니터링을 위한 빠르고 간편한 시험법이라 사료 된다. 본 실험을 통하여 퇴비 및 액비 중 축산 항생제의 잔류 현황을 파악하여 모니터링 자료를 확보하였고 이를 활용하여 검출된 항생제들이 안전한 토양 및 생태 환경 유지 및 관리의 기초 자료와 더불어 환경기준 예비 항목 및 설정(안)을 위한 기초자료로 제공 및 다양하게 활용될 수 있을 것으로 판단된다.

유공 유리분말이 자기충전 콘크리트의 특성에 미치는 영향 (Effect of Hollow Glass Powder on the Self-Compacting Concrete)

  • 윤섭;한민철
    • 한국건축시공학회지
    • /
    • 제18권2호
    • /
    • pp.141-149
    • /
    • 2018
  • 본 연구는 자기충전 콘크리트의 생산 및 시공 시 굳지 않은 상태의 안정성을 향상시킬 목적으로 유공 유리분말(GB)를 혼입한 자기충전 콘크리트에 대하여 충전성, 통과성, 재료분리 저항성 및 레올로지 특성을 평가하였다. 실험결과, GB 혼입량에 따른 충전성은 GB의 볼베어링 효과로 인해 GB $2.0kg/m^3$까지 $T_{50}$ 도달시간이 Plain에 비하여 단축되어 충전성이 개선되는 것으로 나타났다. 단, GB $4.0kg/m^3$에서는 오히려 약간 증가되었다. 통과성의 경우에는 Plain 1등급, GB $0.5{\sim}2.0kg/m^3$ 0등급, GB $4.0kg/m^3$ 1등급으로 GB 혼입량 $2.0kg/m^3$까지 '보이는 차단 없음'으로 통과성이 개선되었다. J-ring에 의한 통과성 Block step($P_J$) 값도 GB $1.0kg/m^3$에서 가장 우수한 통과성을 나타내었다. GB 혼입에 따른 재료분리 저항성은 동적 재료분리 저항성은 Plain 보다 GB을 사용하게 되면 그 혼입량에 상관없이 동적 재료분리 저항성이 증가하였다. 정적 재료분리 저항성은 GB $1.0kg/m^3$에서 재료분리도 2.5%를 나타내어 Plain(12.5%) 대비 크게 개선되었다. GB 혼입에 따른 레올로지 특성은 GB 혼입량 증가에 따른 소성 점도는 큰 차이가 발생하지 않았으나 항복응력은 $1.0kg/m^3$까지 낮아졌다. 이상을 종합하면, GB를 $1.0kg/m^3$ 사용하게 되면 자기충전 콘크리트의 충전성, 통과성, 항복응력 개선에 효과적인 것으로 나타났다. 또한 재료분리 저항성을 증가시켜 자기충전 콘크리트의 안정성에 도움이 될 것으로 판단된다.

단백질 및 대사 에너지 수준이 유색 육용계의 생산성 및 도체율에 미치는 영향 (Effect of Protein and Energy Levels on Performance and Carcass Rate in Cross Bred Chicks)

  • 나재천;박성복;방한태;강환구;김민지;최희철;서옥석;류경선;장형관;최종태
    • 한국가금학회지
    • /
    • 제36권1호
    • /
    • pp.23-28
    • /
    • 2009
  • 본 실험은 CP와 ME 수준이 유색 육용계의 생산성 및 도체율에 미치는 영향을 구명하고자 사양 실험을 수행하였는데, 공시축은 한협3호 720수를 사용하였다. 사료 내 ME 수준은 사육 전기(0~5주령) 2,950, 3,000 및 3,050 kcal/kg, CP는 19, 20 및 21%이었으며, 사육 후기(6~10주령)에는 ME 3,100, 3,150 및 3,200 kcal/kg, CP는 17, 18 및 19%로 처리하였다. 시험 결과 전 기간 동안 ME 3,100(2,950), 3,150(3,000) 및 3,200(3,050) kcal/kg 처리구간의 증체량, 사료 섭취량에서는 차이가 나타나지 않았으나, 사료 요구율에서는 ME 3,150(3,000), 3,200(3,050) kcal/kg 처리구가 ME 3,100(2,950) kcal/kg 처리구보다 유의적으로 개선되었다(P<0.05). 또한, CP 17(19), 18(20) 및 19(21)% 처리구간에서도 증체량과 사료 섭취량은 차이가 없었으나, 사료 요구율에서는 CP 19(21)% 처리구가 CP 17(19)% 처리구보다 유의적인 차이를 보였다(P<0.05). 실험 종료 후 도체율 및 복강 지방 축적율은 ME 3,100(2,950), 3,150 (3,000) 및 3,200(3,050) kcal/kg 처리구간에 서로 차이가 나타나지 않았으며, CP 17(19), 18(20) 및 19(21)% 처리구간에서도 차이가 나타나지 않았다.

통합병참지원에 관한 연구 (A Study on Integrated Logistic Support)

  • 나명환;김종걸;이낙영;권영일;홍연웅;전영록
    • 한국신뢰성학회:학술대회논문집
    • /
    • 한국신뢰성학회 2001년도 정기학술대회
    • /
    • pp.277-278
    • /
    • 2001
  • The successful operation of a product In service depends upon the effective provision of logistic support in order to achieve and maintain the required levels of performance and customer satisfaction. Logistic support encompasses the activities and facilities required to maintain a product (hardware and software) in service. Logistic support covers maintenance, manpower and personnel, training, spares, technical documentation and packaging handling, storage and transportation and support facilities.The cost of logistic support is often a major contributor to the Life Cycle Cost (LCC) of a product and increasingly customers are making purchase decisions based on lifecycle cost rather than initial purchase price alone. Logistic support considerations can therefore have a major impact on product sales by ensuring that the product can be easily maintained at a reasonable cost and that all the necessary facilities have been provided to fully support the product in the field so that it meets the required availability. Quantification of support costs allows the manufacturer to estimate the support cost elements and evaluate possible warranty costs. This reduces risk and allows support costs to be set at competitive rates.Integrated Logistic Support (ILS) is a management method by which all the logistic support services required by a customer can be brought together in a structured way and In harmony with a product. In essence the application of ILS:- causes logistic support considerations to be integrated into product design;- develops logistic support arrangements that are consistently related to the design and to each other;- provides the necessary logistic support at the beginning and during customer use at optimum cost.The method by which ILS achieves much of the above is through the application of Logistic Support Analysis (LSA). This is a series of support analysis tasks that are performed throughout the design process in order to ensure that the product can be supported efficiently In accordance with the requirements of the customer.The successful application of ILS will result in a number of customer and supplier benefits. These should include some or all of the following:- greater product uptime;- fewer product modifications due to supportability deficiencies and hence less supplier rework;- better adherence to production schedules in process plants through reduced maintenance, better support;- lower supplier product costs;- Bower customer support costs;- better visibility of support costs;- reduced product LCC;- a better and more saleable product;- Improved safety;- increased overall customer satisfaction;- increased product purchases;- potential for purchase or upgrade of the product sooner through customer savings on support of current product.ILS should be an integral part of the total management process with an on-going improvement activity using monitoring of achieved performance to tailor existing support and influence future design activities. For many years, ILS was predominantly applied to military procurement, primarily using standards generated by the US Government Department of Defense (DoD). The military standards refer to specialized government infrastructures and are too complex for commercial application. The methods and benefits of ILS, however, have potential for much wider application in commercial and civilian use. The concept of ILS is simple and depends on a structured procedure that assures that logistic aspects are fully considered throughout the design and development phases of a product, in close cooperation with the designers. The ability to effectively support the product is given equal weight to performance and is fully considered in relation to its cost.The application of ILS provides improvements in availability, maintenance support and longterm 3ogistic cost savings. Logistic costs are significant through the life of a system and can often amount to many times the initial purchase cost of the system.This study provides guidance on the minimum activities necessary to Implement effective ILS for a wide range of commercial suppliers. The guide supplements IEC60106-4, Guide on maintainability of equipment Part 4: Section Eight maintenance and maintenance support planning, which emphasizes the maintenance aspects of the support requirements and refers to other existing standards where appropriate. The use of Reliability and Maintainability studies is also mentioned in this study, as R&M is an important interface area to ILS.

  • PDF

포항분지 해상 중소규모 CO2 저장 실증연구 (Demonstration-scale Offshore CO2 Storage Project in the Pohang Basin, Korea)

  • 권이균
    • 지질공학
    • /
    • 제28권2호
    • /
    • pp.133-160
    • /
    • 2018
  • 신기후체제 출범 이후 온실가스 감축목표 달성을 위한 대규모 $CO_2$ 직접 감축의 거의 유일한 방안으로 알려져 있는 대용량 $CO_2$ 지중저장의 중요성이 강조되고 있다. 포항 분지 해상 중소규모 $CO_2$ 지중저장 실증사업은 대규모 $CO_2$ 저장 사업에 필요한 핵심 기술을 우선적으로 확보하기 위해 추진하고 있는 연구개발 사업이다. 국내 저장 실증을 위한 $CO_2$ 저장소 확보를 위해 2010년부터 3년간 육상-연안 $CO_2$ 저장소 탐사 연구 과제를 수행하여, 한반도 동남부 육상 및 연안에 걸쳐 발달하고 있는 포항분지를 중소규모 $CO_2$ 지중저장 실증 후보지역으로 선정한 바 있다. 2013년부터는 포항분지 해상 지층을 대상으로 저장소 탐사, 탐사시추, 저장소 특성화, 저장 설계, 플랫폼 설계 및 설치, 주입공 시추 및 완결, 주입설비 설치, 주입 및 모니터링 등의 개별 기술 개발을 수행하였으며, 2017년 초 국내 기술력을 기반으로 해저 실증 저장소에 국내 최초로 $CO_2$ 시험주입 실증에 성공하였다. 향후에는 $CO_2$ 저장소 연속 운전 실증을 위한 수송체계 구축과 저장소 운영체계 확립 연구를 진행할 계획이다. 안전하고 효율적인 저장소 운영을 위해 상시 주입 모니터링 및 정기적인 거동 누출 환경 모니터링을 수행할 계획이며, 이를 위한 주입 전 모니터링을 완수하고 모니터링 체계를 구축하였다. 포항분지 해상 중소규모 $CO_2$ 지중저장 실증 연구를 통해 국내 대규모 CCS 통합실증 및 상용화 사업에 필요한 핵심적 $CO_2$ 저장 기술을 자립화 하였고, 성공적인 시험 주입으로 대규모 $CO_2$ 지중저장 사업의 기술적 경험적 기초를 확보하였다. 또한 본 연구 사업은 국제적으로 점차 확대되고 있는 $CO_2$ 지중저장 기술 시장에서 우리나라의 기술 경쟁력을 확보하는데 기여할 것으로 기대된다.