• Journal of Wetlands Research
• /
• 제17권1호
• /
• pp.101-111
• /
• 2015

This study conducted a field experiment to estimate the characteristics of the rain garden installed at the site near Haman, also proposed a one-dimensional model to simulate the infiltration and runoff from the rain garden. This model was used to evaluate the rain garden using the rainfall data after the installation and during the last 10 years. Also, this model was applied to the annual maximum rainfall events to quantify the size of the impervious area that the rain garden can offset the adverse effect. The results are summarized below. (1) Hydraulic conductivity of the rain garden was estimated to be about 0.0188 m/hr by the variable-stage experiment. Also, the simulation experiment using the last 10 years rainfall data over the entire roof area showed that the infiltration amount is about 90.38% out of the total rainfall. (2) Infiltration simulation of the annual maximum rainfall events during last 10 years showed that the rain garden can offset the impervious area with its size about 30 times of the rain garden surface.

• Journal of Satellite, Information and Communications
• /
• 제10권4호
• /
• pp.117-127
• /
• 2015

Recently, research and development on satellite payloads are being developed such as the optical sensor, SAR etc. Satellite image for earth observation is being utilized both domestically and abroad. Advanced satellite payload technology has led to the collection and analysis of satellite images relying on the optical sensor. Currently, related organizations such as RDA(the Rural Development Administration) are collectively collaborating to plan a national project to develop a medium-sized satellite based on Korea's domestic technology independently. This paper investigated the cases of the past research on application of satellite images for agriculture and analyzed the technical specifications for satellite payload in each area of such application. Based on the results of the past surveys and consultation studies among local experts in satellite image application, we analyzed the current trends, plans and applications of domestic and overseas R&D in satellite payloads for earth observation in agriculture, and proposed the appropriate technical specifications for developing a future medium-sized satellite for agriculture. The proposed specifications were then incorporated into a simulated satellite to examine its performance to observe the Korean farming areas. The authors anticipate that the findings of this paper will form a useful technical basis for providing the appropriate specifications for developing future medium-sized satellite payloads to be used in agriculture and forestry, and enabling the end users to efficiently utilize the satellite.

• Proceedings of KOSOMES biannual meeting
• /
• 해양환경안전학회 2009년도 춘계학술발표회
• /
• pp.79-84
• /
• 2009

Recently, the degree of navigating vessel's risk is increasing significantly by growing of vessel's volume and increasing of marine facilities, marine bridges and port development etc. As a result, Ministry of Land, Transport and Maritime Affairs generalized formal Maritime Safety Audit as a comprehensive maritime traffic safety management system in order to ensure safety improvements from the planing to maintaining of the development which influence to maritime traffic environment. A MSA is a formal safety performance examination of an existing or future fairway by an audit team. It qualitatively estimates and reports on potential risk of Maritime traffic safety and identifies the measure for improving in safety of human life and preservation of environment. This paper introduced the outline of MSA policy as the guideline for making audit reports is on its developing which is mainly processed by Maritime Safety Research Center, KST in cooperation with KMU, MMU and KORDI.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제19권2호
• /
• pp.370-379
• /
• 2018

The Korean government announced plans for the International Science Business Belt as a spatial area for promoting the linkage between scientific knowledge and commercialization in 2009. R&D and entrepreneurial activities are essential for the success of the International Science Business Belt. In particular, prioritizing the types of businesses is critical at the cluster establishment stage in that this largely affects the features and development of clusters comprising the International Science Business Belt. This research aims to predict the entry and growth of firms that specialize in four industrial clusters, including Big Science Cluster, Frontier Cluster, ICT Cluster, and Bio-Healthcare Cluster. For this purpose, we employ the Swann & Prevezer's industrial clustering model to identify sectors that affect the establishment and growth of industrial clusters in the International Science Business Belt, focusing on ICT, Bio-Healthcare and Frontier clusters. Data was collected from the 2014 Korean Innovation Survey (KIS) and University Alimi for the ICT cluster, 2014 National Bio Industry Survey and University Alimi for the Bio-Healthcare Cluster, and the 2015 National Nano Convergent Industry Survey and Annual Report of Nano Technology for the Frontier cluster. Empirical results show that the ICT service sector, bio process/equipment sector, and Nano electronic sector promote clustering in other sectors. Based on the analysis results, we discuss several policy implications and strategies that can attract relevant firms for the development of industrial clusters.

• Journal of Korean Tunnelling and Underground Space Association
• /
• 제20권1호
• /
• pp.183-195
• /
• 2018

Recently, the need for research on vertical shaft excavation is increasing with the increase of the demands for the underground and utility tunnels. As a part of the R&D project of the Ministry of Land, Infrastructure and Transport, CUT (center for utility tunnel) has developed "Ring cut method". "Ring cut method" is a method to improve the stability of the ground against the basal heave by excavator wall pre-penetration during vertical shaft excavation. In this study, the basal heave was simulated by centrifugal model test. The basal heave, ground subsidence, and ground deformation of surrounding ground were analyzed by soil plug effect from wall pre-penetration. It was found that the soil plug could control the basal heaving and ground subsidence, and verified that the 'Ring cut method' could be a good countermeasure for the ground stability against the basal heave.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제14권8호
• /
• pp.4068-4076
• /
• 2013

The wheel-rail interaction forces are influenced by the velocity of vehicle, wheel load, alignment (curve radius, cant etc). For the safety of track structure, it is required to evaluate the influences for track and influential factors. Recently, the HEMU 430-X, which was developed by Next Generation High-Speed Rail Development R&D Project, achieved 421.4km/h in a test run of Daegu.Busan section of the Gyeongbu high speed rail on March in 2013. In the case of additional speed-up test on Test-Bed Section(Gongju.Jeongeup: KP 100~128km Osong starting point), the analysis of track forces is required for outer rail by the increase of dynamic force and centrifugal force of vehicle. In this paper, the vehicle speed variation on HSL line is evaluated by TPS analysis considering the tractive effort of HEMU 430-X, tested running resistance and alignment of Honam HSR. And the track forces are evaluated by centrifugal force and impact factor on curved track.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제21권8호
• /
• pp.563-571
• /
• 2020

The purpose of a utility tunnel is to prevent repeated excavation as well as disasters and calamity. Domestic utility tunnels have been built in new town development plans. Currently, it is difficult to establish a utility tunnel due to a conflict of opinions by organization and financing. In this paper, research was conducted based on systematic procedures to suggest ways of improving the activation of utility tunnels in new cities and existing cities. First, a survey was conducted on the laws and status of utility tunnels, and problems were derived based on the review and analysis of the status. Finally, a method suggesting improvement measures to solve problems was applied. Based on the related laws and problems, the status of the development project was analyzed to select the installation scale in the utility tunnel, and the appropriate scale was reviewed through economic feasibility analysis of the installation scale under 2 million square meters. Considering the new city and the existing city, it was proposed to support administrative expenses to reduce the burden on additional installation areas and occupied institutions in a utility tunnel. In addition, improvement plans were presented for the details of the master plan for reviewing the installation regional of the utility tunnel. This paper will help officials to work smoothly when planning and installing utility tunnels in the future.

• Journal of the Korean Society for information Management
• /
• 제36권4호
• /
• pp.227-251
• /
• 2019

In early 2019, Korea passed the law that introduced data management plan policy similar to those adopted by national funding agencies in other countries. In anticipation of developing research data infrastructure and support services, this study analyzed Australia's relevant policies and policy instruments. A number of face-to-face interviews with the experts at the national funding agency, a national research data agency and a number of research libraries, along with focused literature analysis. In Australia, the 2015 Public Data Policy is applied to research data from publicly funded research. Research data management and sharing is recommended but not required by the national funding agency it its policy documents. Australian National Data Service(ANDS), Australia's national research data agency, is an important component of the national research infrastructure. ANDS plays a wide range of roles including research data platform development, education and training, policy support, and funding agency for small-scale R&D. Some of the Australian research libraries have developed in-house systems for research data storage and publishing. However, there is no significant demand for research data service as yet. Lessons learned include the following: ensuring transparency and predictability of research data policies, establishing a dedicated agency responsible for research data platform development and training, and cultivating data capabilities at research libraries.

• Journal of Navigation and Port Research
• /
• 제32권8호
• /
• pp.645-652
• /
• 2008

The interest on the marine leisure sports is rapidly increasing with the advent of the five-day week and with increments of GNP. The self-governing bodies are trying to drag large investments into the marine leisures industry through international exhibitions and yacht rallies. Unfortunately, the demands in the domestic area don't increase differently from those demand patterns in the advanced countries. In this study, several suggestions for vitalizations on the marine leisure industry are made after surveying the recognition degree of the domestic people on the marine leisures and the current states of their spending on the marine leisures. As results, it has been shown that the policies based upon negative factors coming from negative understandings on the leisure activities should be largely revised. Further, it seems that the policies for the preparations of the laws and the regulations for the marine leisures as well as for the R&D policies should be taken systematically so that the infra structures are constructed while improving the negative understandings on the leisures. The fundamental databases investigated in this study will help the policy makers and the investors reduce the risks of the policy and the investments in the field of marine leisure sports.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제17권12호
• /
• pp.394-399
• /
• 2016

This study examines how the patent results of the University Academic-Industrial Cooperation influence technology transfer. Statistical analysis was performed by using 2013 panel data from the Ministry of Education and Science Technology(MEST) National Research Foundation of Korea(NRF) and the results are as follows. The results show that the patent result factors that have a positive effect on the total number of technology transfers are domestic patent application numbers, foreign patent application numbers, future technology(6T) patent application numbers, science technology patent application numbers. The factors that have a positive effect on increasing royalty are the total number of technology transfers. Domestic patent application numbers, future technology(6T) patent application numbers and science technology patent application numbers have a positive effect on patent results. The results implicate that more research and development is needed for more patents to be applied, that the main focus should be on future technology(6T) and science technology fields, and that effort should be directed at planning negotiation strategies for the term of the contract. However, this study is the need to research, including primary research is so patent performance may be limited in having only been considered in future studies of human and material resources and operating system factors that may be presented to the essential elements of the Industry-Academic Cooperation Foundation this raises.