• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.4
• /
• pp.371-380
• /
• 2010

The CATR(Compact Antenna Test Range) is a testing facility which is to provide the uniform plane wave by using the reflector. As the ripple of the uniform plane wave caused by the diffraction rays at the edge of the reflector, serrations are attached at the edge of the reflector to minimize the ripple of the uniform plane wave in the CATR. The diffraction field of the serration is normally analyzed by the Fresnel diffraction formula which is expressed as the double integration, and the structure of the serration is expressed as Fourier series to apply the double integration of the Fresnel diffraction formula. In this paper, the novel shark-fin shaped serrations which have the height modulation of the adjacent serrations are proposed. And the triangular serrations and the novel shark-fin shaped serrations are compared to confirm that the performance of the quiet zone by the shark-fin shaped serrations is better than by the triangular serrations. It is also confirmed that the novel shark-fin shaped serrations which have the height modulation of the adjacent serrations are lower ripple than which have the same height of the adjacent serrations. Accordingly, the novel shark-fin shaped serrations with the height modulation can be used at the edge of the reflector to provide the uniform plane wave in CATR.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.1
• /
• pp.49-55
• /
• 2009

Our domestic economy has been developed very rapidly after 1960's. Also, it is dramatically increasing traffic on road and surround environmental issues. Especially, rapid economic growth has been induced large construction of pavement, and bigger and higher traffic for transportation. These are making air pollution, traffic noise and vibration. The social requirement against the revealed road environment and traffic sound reduction is being demanded. Traffic noise of city zone is showed over the environmental specification more than 57%. In order to overcome these situations, the social attention is being increased. The quiet pavement is the same format of permeable pavement, but is not same for functional performance. In this research, it has been carried out to evaluate the fundamental-mechanical properties of hot mix asphalt for quiet pavement. Especially, couple of laboratory tests are conducted like marshall stability, resilient modulus, indirect tensile test, and compaction energy analysis with gyratory compaction curve. Also, two-layer pavement system has been adopted for developing of quiet pavement. The basic performance of hot mix asphalt of quiet pavement show a satisfaction of specification of hot mix asphalt.

• Journal of Biomedical Engineering Research
• /
• v.28 no.5
• /
• pp.628-635
• /
• 2007

We studied the effect of vibratory stimulations of different leg muscles, tibialis anterior(TA) and triceps surae(TS), and plantar zones in ten healthy subjects during 1) quiet standing, 2) forward lean of body, 3) backward lean of body, 4) right lean of body, and 5) left lean of body. The experiments were performed on the force platform. The effect of vibration were measured by monitoring the area of COP(Center of pressure) sway. The subjects wore a vibratory stimulation system on foot and ankles and were given the instruction not to resist against the applied perturbations. The results show that all vibratory stimulations to lower limb muscles and plantar zones reduced the COP sway area. This reduction of the COP sway area occurred also in partial vibratory stimulations during quiet standing. In forward lean of body, vibratory stimulations to TA reduced the COP sway area. During backward lean of body, vibratory stimulations to TS reduced the COP sway area. When the subject was tilted right, vibratory stimulations to left plantar zone reduced the COP sway area. During left lean of body, vibratory stimulations to right plantar zone reduced the COP sway area. Thus, the influence of vibratory stimulations to leg muscle and plantar zones differed significantly depending on the lean of body. We suggest that the vibration stimuli from leg muscles and plantar zones could be selectively used to help maintaining postural balance stable.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.6 s.121
• /
• pp.612-619
• /
• 2007

In this paper, a Four-wired antenna was designed and manufactured using Four-wires in order to perform EMI/EMC experiments. As compared with a TEM cell, the feature of the Four-wired antenna has simple installment with broadband balun, a Four-wired antenna, and loading resistances in an anechoic chamber. And the E-field polarization of antenna can be easily changed. Without the limitation of space, EMI/EMC experimental environment could be built within the anechoic chamber with the moderate cost. In S, C, and X-bands, the manufactured antenna was able to make an experiment on EMI/EMC with the DUT which has the quiet zone of the height, width, length equal to about 10 cm.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.5
• /
• pp.471-481
• /
• 2016

We introduce the design technique and test results of a millimeter-wave compact antenna test range. Physical optics is employed for the analysis of the plane wave collimated by an electrical large parabolic reflector of the compact range in the test zone. The performance of the manufactured compact range is verified with the field probing test on the quiet zone and the measurement of high gain antenna. A millimeter-wave compact range designed in the frequency range of 75~110 GHz with a diameter of the test zone of 50 cm shows the magnitude variation of less than 0.75 dB.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.620-628
• /
• 2005

Spatial control of sound is essential to deliver better sound to the listener's position in space. As it can be experienced in many listening environments, the quality of sound can not be manifested over every position in a hall. This motivates us to control sound in a region we select. The primary focus of the developed method has to do with the brightness and contrast of acoustic image in space. In particular, the acoustic brightness control seeks a way to increase loudness of sound over a chosen area, and the contrast control aims to enhance loudness difference between two neighboring regions. This enables us to make two different kinds of zone - the zone of quiet and the zone of loud sound - at the same time. The other perspective of this study is on the direction of sound. It is shown that we can control the direction of perceived sound source by focusing acoustic energy in wavenumber domain. To begin with, the proposed approaches are formulated for pure-tone case. Then the control methods are extended to a more general case, where the excitation signal has broadband spectrum. In order to control the broadband signal in time domain, an inverse filter design problem is defined and solved in frequency domain. Numerical and experimental results obtained in various conditions certainly validate that the acoustic brightness, acoustic contrast, direction of wave front can be manipulated for some finite region in space and time.

• Journal of Power System Engineering
• /
• v.13 no.4
• /
• pp.43-48
• /
• 2009

The purpose of this study is to show how to eliminate the noises and to obtain the data related with the relationship between AE signal characteristics and mechanical behaviors for the pressure vessel steel. Various kinds of noises are introduced into the AE data in the course of experiments. Accordingly, real AE data have to be obtained after tests. AE test was carried out under four point bending load. Among AE signals, counts and signal strength are used to find out the differences of AE characteristics between the basemetal and weldment. After tests, this paper shows the procedures of filtering the noises against basemetal of the pressure vessel steel to obtain the real data around crack tip. Relationships between plastic zone size and cumulative AE counts are shown also. AE signals were absent within an elastic region, regardless of the specimens. Most of AE signals are produced in the process of plastic deformation. The deformation and fracture modes of basemetal and weldment are quiet different.

• Journal of KSNVE
• /
• v.5 no.4
• /
• pp.440-452
• /
• 1995

이 글에서는 능동소음제어에 있어서, 음장 혹은 음원을 표현하는 물리량은 음향에너지, 파워, 인텐시티를 통하여 제어 가격함수로서의 각 의미를 살펴보았다. 졍리하면 이 세가지 물량들은 음향에너지의 균형이라는 물리적 변칙에 의해 서로 단단히 결속되어 있으며, 이들은 음장의 형태와 성격 그리고 파장과 주파수 등과 관련이 있으므로, 능동소음제어 입장에서 제어 목적에 맞게 적절히 사용할 필요가 있다고 볼 수 있다. 음향 에너지의 제어 개념 즉, 음향에너지를 가격함수로 하는 제어 방법은, 원하는 정숙공간(zone of quiet)을 제어할 때 그 적절성이 있음을 보았 으며, 음향 파워는 그 물리량 자체가 어떤 음원의 특성을 표현하고 있으므로 제어에 의하여 방사 효율을 감소(weak radiator)시키고자 할 때 가장 자연스러운 가격 함수 가 됨을 살펴보았다. 또한 음향 인텐시티라는 물리량은 음향 에너지의 전달 특성을 대표하는 특성임을 살펴보았고, 따라서 소음 전파의 감소(noise transmission reduction)를 위한 제어 가격 함수로의 당위성을 확인하였다. 이러한 모든 제어 방법 들이 사실은 가관측성 및 가제어성을 가져야 함은 주지의 사실이며, 음향 파워나 인텐시티를 가격 함수로 하는 제어 방법의 경우 실제적인 가관측성상의 문제점들로 인하여 그 현실성이 아직은 거리가 있다 하겠다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.11
• /
• pp.1137-1146
• /
• 2004

In an apartment house In Korea, the balcony is one of the important spaces as a buffer zone for controlling the outdoor environments such as noise, heating & cooling load, humidity etc. Because most areas of building facade in apartment building occupy the area of balcony window the sound Insulation design of It Is very Important to provide the quiet indoor environment. The aim of this research is to evaluate the sound insulation of balcony windows in apartment building by new and revised Korean Industrial Standards. We measured and studied the sound insulations of 18 balcony windows by the type of measuring methods, noise sources, correction of reverberation time in balcony and so on. The results show that the single-number quantities for sound insulation of windows are ranged from 24 dB to 30 dB.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.7
• /
• pp.499-507
• /
• 2003

This paper presents a method for active noise control (ANC) in a duct by using a ring-tyPe smart foam. The ring-type smart foam consists of an elastic porous material of lining shape and a PVDF film embedded In the material. The PVDF element acts as a secondary sound source to reduce the noise. Active noise control using a ring-type smart foam is only effective locally because of the way to excite radially. To enlarge the quiet zone, the duct Is lined with additional acoustic foam between the smart foam and the error microphone. When cancellation path ks optimized by the LMS/RLS algorithm, the computation power is reduced while control performance Is maintained. The filtered-x LMS algorithm is used to minimize the error signal.