• 한국전산유체공학회:학술대회논문집
• /
• 1999.05a
• /
• pp.213-218
• /
• 1999

The $LiBr-H_{2}O$ absorption process on a horizontal tube has been analyzed using the numerical method which incorporates the fully elliptic Navier-Stokes equations for the momentum equations, the energy and mass-diffusion equations. On a staggered grid, the SIMPLER algorithm with the QUICK scheme is used to solve these equations along with the MAC method for the free surface tracking. With the assumption that the absorbent is linear, calculations have been made for various inlet temperature and flow-rate conditions. The detailed results of the parametric study, such as the temperature, concentration, absorption mass flux and wall heat flux distributions are presented. The self-sustained feature of the absorption process is clearly elaborated. The analyses have also been carried out for multiple tube arrangement and the results show that the absorption rate converges after a few tube rows.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.28B no.12
• /
• pp.38-50
• /
• 1991

A current-controlled scheme of pulse width modulation voltage source inverter (PWM VSI) has attracted considerable attention due to its fast response with current limit and especially suitable for potentially high performance applications such as AC motor drives and UPS systems. These features yield near-sinusoidal currents in the load with reduced current peaks, lower inverter switching frequency and reduce inverter and load stresses. A high performance current-controlled inverter must have a quick response in transient state and low harmonic current in steady state. This paper compares and shows the controlled-characteristics with hysteresis controller(HC), ramp comparison controller(RCC) and predictive controller(PC) of PWM inverter to control actual current of VSI-IM.

• International Journal of Reliability and Applications
• /
• v.18 no.2
• /
• pp.21-44
• /
• 2017

Accelerated life tests (ALTs) are frequently used in manufacturing industries to evaluate the reliability of products within a reasonable amount of time and cost. Test units are subjected to elevated stresses which yield quick failures. Most of the previous works on designing ALT plans are focused on tests that involve a single stress. Many times more than one stress factor influence the product's functioning. This paper deals with the design of optimum modified ramp-stress ALT plan for Burr type XII distribution with Type-I censoring under two stress factors, viz., voltage and switching rate each at two levels- low and high. It is assumed that usage time to failure is power law function of switching rate, and voltage increases linearly with time according to modified ramp-stress scheme. The cumulative exposure model is used to incorporate the effect of changing stresses. The optimum plan is devised using D-optimality criterion wherein the ${\log}_{10}$ of the determinant of Fisher information matrix is maximized. The method developed has been explained using a numerical example and sensitivity carried out.

• Journal of the Korean Data and Information Science Society
• /
• v.18 no.3
• /
• pp.679-688
• /
• 2007

We select the 'rapid reading and comprehension method' to promote the reading skill, and want to apply it to students to study how their reading speed and comprehension improves. For this purpose, in this paper, we define reading as an accurate and quick ability to process information, and the object of this research is to verify a scheme to improve the reading skill, which is called the 'rapid reading and comprehension method - reading based on this method means fast reading as well as an accurate understanding which increases the amount of information received'. For data collection, we selected four primary school in the Kimje city. We found out validation the effective improvement of the reading ability by the 'rapid reading and comprehension method program'. The students' reading speed was enhanced by the rapid reading training and the comprehension ability increased as well.

• Journal of Navigation and Port Research
• /
• v.26 no.5
• /
• pp.549-554
• /
• 2002

A country is acutely needed to establish a marine salvage & oil spills response system in order to prepare for a disaster. When a severe marine accidents occur, our country depends on foreign technique because of the insufficiency of facilities and technique. The damage of accidents expands due to not taking proper actions in early stage. Accordingly, in case of marine accidents, this paper aims to suggest a various scheme of infrastructure, investment of facilities, technical development, improvement of ability and etc. in salvage & oil spills response system in order to quick and effective response to the marine casualties.

• Current Optics and Photonics
• /
• v.4 no.4
• /
• pp.302-309
• /
• 2020

An image encryption scheme based on the quick response (QR) code as a data container has aroused wide interest due to the lossless recovery of the decrypted image. In this paper, we apply this method to multi-image encryption. However, since the decrypted image is affected by crosstalk noise, the number of multi-image encryptions is severely limited. To solve this problem, we analyzed the performance of QR code as a data container, and processed the decrypted QR code using the proposed method, so that the number of multi-image encryptions is effectively increased. Finally, we implemented a large image (256 × 256) encryption and decryption.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.295-300
• /
• 2001

A variety of high voltage DC power supplies employing the high frequency inverter are difficult to achieve soft switching considering a quick response and no overshoot response under the wide load variation ranges which are used in medical-use x-ray high voltage generator from 20kV to 150kV in the output voltage and from 0.5mA to 1250mA, respectively. The authors develops soft switching high voltage DC power supply designed for x-ray power generator applications, which uses series resonant inverter circuit topology with a multistage voltage multiplier instead of a conventional high voltage diode rectifier connected to the second-side of a high-voltage transformer with a large turn ratio. A constant on-time dual mode frequency control scheme operating under a principle of zero-current soft switching commutation is described. Introducing the multistage voltage multiplier, the secondary transformer turn-numbers and stray capacitance of high-voltage transformer is effective to be greatly reduced. It is proved that the proposed high-voltage converter topology with dual mode frequency modulation mode control scheme is able to be the transient response and steady-state performance in high-voltage x-ray tube load. The effectiveness of this high voltage converter is evaluated and discussed on the basis of simulation analysis and observed data in experiment.

• The Journal of the Korea Contents Association
• /
• v.7 no.4
• /
• pp.20-29
• /
• 2007

Although E-mail system is considered as a most important communication media, 'Spam' is flooding the Internet with many copies of the same message, in an attempt to force the message on people who would not otherwise choose to receive it. Most spam is commercial advertising, often for dubious products, get-rich-quick schemes, or quasi-legal services. Therefore advanced anti-spam techniques are required to basically reduce its transmission volume on sender mail server or MTA, etc. In this study, we propose a new sender authentication model with encryption function based on modified DomainKey with SMS for Spam mail protection. From the SMS message, we can get secret information used for verification of its real sender on e-mail message. And by distributing this secret information with SMS like out-of-band channel, we can also combine proposed modules with existing PGP scheme for secure e-mail generation and authentication steps. Proposed scheme provide enhanced authentication function and security on Spam mail protection function because it is a 'dual mode' authentication mechanism.

• Journal of Korea Multimedia Society
• /
• v.10 no.5
• /
• pp.623-630
• /
• 2007

With the development in IT technology and with growing demands of users, a ubiquitous environment is being made. Because of individuals identification is important in ubiquitous environment, RFID, a technology used frequently. RFID, a technology that radio frequency identification, reader send signer, then tag provide user information. RFID has various strengths, such as high recognition rates, quick recognition speed, but Eavesdropping is possible and problem that user information is revealed happens. To solve this, study is proceeded with activity, but, because of low-cost passive tag is limited operation capability, usually used hash function and random number. Also updates value that is used to present session and uses in next session. Therefore, this scheme protects user privacy using random number. And this sheme can offer synchronization by creating variable value without updating value.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.317-320
• /
• 1997

In the water purification plant, chemicals are injected for quick purification of raw water. It is clear that the amount of chemicals intrinsically depends on the water quality such as turbidity, temperature, pH and alkalinity etc. However, the process of chemical reaction to improve water quality by the chemicals is not yet fully clarified nor quantified. The feedback signal in the process of coagulant dosage, which should be measured (through the sensor of the plant) to compute the appropriate amount of chemicals, is also not available. Most traditional methods focus on judging the conditions of purifying reaction and determine the amounts of chemicals through manual operation of field experts or jar-test results. This paper presents the method of deriving the optimum dosing rate of coagulant, PAC(Polymerized Aluminium Chloride) for coagulant dosing process in water purification system. A neural network model is developed for coagulant dosing and purifying process. The optimum coagulant dosing rate can be derived the neural network model. Conventionally, four input variables (turbidity, temperature, pH, alkalinity of raw water) are known to be related to the process, while considering the relationships to the reaction of coagulation and flocculation. Also, the turbidity in flocculator is regarded as a new input variable. And the genetic algorithm is utilized to identify the neural network structure. The ability of the proposed scheme validated through the field test is proved to be of considerable practical value.